TX 20X10 Coys $500.00 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2500HD · 04-23-2011, 03:31 PM

Two 20X10 Coys chrome C-5. Backspace is 5 inches. Great fit for the narrower early 70 and below rearends. They have never been run but they have been mounted.

Pay special attention to the mounting holes, the inside have scrathes from the socket when they were mounted. They also have inserts in the stud holes. After i finally got them after about 8 weeks and noticed the inserts i called Coys and they were unwilling to replace the wheels and said that is how all of the 5 inch backspace wheels are. There is also a very small crack in the chrome close to the center cap. The chrome is not loose and i do not believe it will peel.

If i need to ship i can take to the UPS store. The boxes are 23X23X12.5 and weigh about 40lbs each. My zip code is 75077 so calcualte your own shipping.

I live in Highland Village Texas and can possibly meet someone around North Dallas or North Fort Worth if needed. I can also bring to Pate at the Texas Motor Speadway next week end if preplanned. I do plan to go but i will not be bringing anything to sell.

Post here if you want them. NO PMs please.

smokinstang70 · 04-23-2011, 05:36 PM

interested... give me a few hours to research. any ideas on ball park shipping to 31312 Savannah GA

2500HD · 04-23-2011, 06:28 PM

It looks like it is 80.

clos69 · 04-24-2011, 05:05 PM

So these are not 5x5?? Im interested and can pick up
Posted via Mobile Device

2500HD · 04-24-2011, 08:30 PM

Yes, they are 5X5.

smokinstang70 · 04-24-2011, 09:19 PM

going to pass... great wheel, great price.. just not sure they will fit my budget right now.

Thanks

2500HD · 04-24-2011, 09:29 PM

Quote:

Originally Posted by smokinstang70

going to pass... great wheel, great price.. just not sure they will fit my budget right now.

Thanks

no problem.

clos69 · 04-24-2011, 10:34 PM

Pm sent
Posted via Mobile Device

Zoomin · 04-24-2011, 11:24 PM

oops out. Hope you get them Carlos - love the look.

clos69 · 04-25-2011, 05:36 AM

Thanks Zoomin...I am very interested in the wheels but can you please clarify why the sticker shows pcd 5x120.65 which = 5x4.75in not 5x5??

2500HD · 04-25-2011, 11:01 AM

Quote:

Originally Posted by clos69

Thanks Zoomin...I am very interested in the wheels but can you please clarify why the sticker shows pcd 5x120.65 which = 5x4.75in not 5x5??

I believe this has something to do with the inserts. Here is a picture when they were mounted on my 67 for test fit. The 67 was the original narrow six lug converted to 5X5 with redrilled axles.

clos69 · 04-25-2011, 12:24 PM

Thanks for clearing that up for me Todd...I'll give you a call later after I get off work to get the deal done, thanks Carlos

2500HD · 04-25-2011, 02:08 PM

Sold to Carlos after inspection and verification of 5X5.

72BlckButy · 04-25-2011, 02:31 PM

Now that they are pretty well spoken for... what's the plan for a replacement wheel? Were these off the '70 or a new project ('67)?

2500HD · 04-25-2011, 03:44 PM

Quote:

Originally Posted by 72BlckButy

Now that they are pretty well spoken for... what's the plan for a replacement wheel? Were these off the '70 or a new project ('67)?

No wheel plans yet.... Maybe Salt Flats. The 5 inch backspace wheels are off of the 67 project which i still have. I bought the 70 in a week moment as it just cought my eye just right. I was hoping the 70 had the narrow rear but it did'nt so i used the fronts off of the 67 and bought the 5.5 inch back space for the wide rear.

The 67 spent at least a year in a "friends" paint jail until i got pissed and picked it up. I blew my truck budget on the 70 so I am looking for a new body guy and building up funds to get back on track.

Steering is all new
Suspension is all new
Rearend is new with Eaton posi and 3.73
Brakes are new
Motor is new - Fastburn 385
Trans is new - 4L60E with Compushift controller
All new Wiring - not installed
I am stuck on the body and should hae never taken it down this far

72BlckButy · 04-25-2011, 05:25 PM

Killer project!

We need to see a build thread on its progress though.

2500HD · 04-27-2011, 01:24 PM

Sold to Carlos.

clos69 · 04-27-2011, 04:00 PM

It was nice meeting you Todd and thx for taking the time to show me that clean bbc shortbed you have there.
Posted via Mobile Device

2500HD · 04-28-2011, 06:22 PM

Quote:

Originally Posted by clos69

It was nice meeting you Todd and thx for taking the time to show me that clean bbc shortbed you have there.
Posted via Mobile Device

No problem Carlos, it nice to meet you as well. Enjoy the wheels.

04-23-2011, 03:31 PM	#1
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 270	20X10 Coys $500.00 Two 20X10 Coys chrome C-5. Backspace is 5 inches. Great fit for the narrower early 70 and below rearends. They have never been run but they have been mounted. Pay special attention to the mounting holes, the inside have scrathes from the socket when they were mounted. They also have inserts in the stud holes. After i finally got them after about 8 weeks and noticed the inserts i called Coys and they were unwilling to replace the wheels and said that is how all of the 5 inch backspace wheels are. There is also a very small crack in the chrome close to the center cap. The chrome is not loose and i do not believe it will peel. If i need to ship i can take to the UPS store. The boxes are 23X23X12.5 and weigh about 40lbs each. My zip code is 75077 so calcualte your own shipping. I live in Highland Village Texas and can possibly meet someone around North Dallas or North Fort Worth if needed. I can also bring to Pate at the Texas Motor Speadway next week end if preplanned. I do plan to go but i will not be bringing anything to sell. Post here if you want them. NO PMs please. Attached Images __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug Last edited by 2500HD; 04-23-2011 at 03:32 PM. Reason: Added post here

04-23-2011, 05:36 PM	#2
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 20X10 Coys $500.00 interested... give me a few hours to research. any ideas on ball park shipping to 31312 Savannah GA __________________ "Love Affair" Build Thread

04-23-2011, 06:28 PM	#3
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 270	Re: 20X10 Coys $500.00 It looks like it is 80. __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug

04-24-2011, 05:05 PM	#4
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: 20X10 Coys $500.00 So these are not 5x5?? Im interested and can pick up Posted via Mobile Device __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

04-24-2011, 08:30 PM	#5
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 270	Re: 20X10 Coys $500.00 Yes, they are 5X5. __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug

04-24-2011, 09:19 PM	#6
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 20X10 Coys $500.00 going to pass... great wheel, great price.. just not sure they will fit my budget right now. Thanks __________________ "Love Affair" Build Thread

04-24-2011, 10:34 PM	#8
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: 20X10 Coys $500.00 Pm sent Posted via Mobile Device __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

04-24-2011, 11:24 PM	#9
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 20X10 Coys $500.00 oops out. Hope you get them Carlos - love the look. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro Last edited by Zoomin; 04-24-2011 at 11:37 PM.

04-25-2011, 05:36 AM	#10
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: 20X10 Coys $500.00 Thanks Zoomin...I am very interested in the wheels but can you please clarify why the sticker shows pcd 5x120.65 which = 5x4.75in not 5x5?? __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

04-25-2011, 12:24 PM	#12
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: 20X10 Coys $500.00 Thanks for clearing that up for me Todd...I'll give you a call later after I get off work to get the deal done, thanks Carlos __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

04-25-2011, 02:08 PM	#13
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 270	Re: 20X10 Coys $500.00 Sold to Carlos after inspection and verification of 5X5. __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug

04-25-2011, 02:31 PM	#14
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 20X10 Coys $500.00 Now that they are pretty well spoken for... what's the plan for a replacement wheel? Were these off the '70 or a new project ('67)? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-25-2011, 05:25 PM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 20X10 Coys $500.00 Killer project! We need to see a build thread on its progress though. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-27-2011, 01:24 PM	#17
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 270	Re: 20X10 Coys $500.00 Sold to Carlos. __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug

04-27-2011, 04:00 PM	#18
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: 20X10 Coys $500.00 It was nice meeting you Todd and thx for taking the time to show me that clean bbc shortbed you have there. Posted via Mobile Device __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.