Greg65 build thread - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sdailey · 06-17-2011, 01:01 PM

Quote:

Originally Posted by FRENCHBLUE72

Where does one get the parker fitting? Also the new hose set up looks great but I think Id look for some nicer clamps??

Check with Allen Orton.

http://allen-orton.com/

greg65 · 06-17-2011, 03:28 PM

Quote:

Originally Posted by FRENCHBLUE72

Where does one get the parker fitting? Also the new hose set up looks great but I think Id look for some nicer clamps??

The clamps are for mock up only. They will be changed out for a nicer set to make it all purdy.

greg65 · 06-17-2011, 03:35 PM

My last russell fitting come in today along with Parker compression to -6an fitting from Shannon. Maybe I can find a little time this weekend to install them.

The part numbers are
russell 620401 6an straight endura hose end

Parker 6xhbu-ss 6an to compression fitting

here is a link to Parker
http://www.parker.com/portal/site/PA...vgnextpartno=6 XHBU-SS&vgnextdiv=687620&vgnextcatid=2638985&configtype=

I will try to add pictures this weekend.

greg65 · 06-22-2011, 10:26 AM

Monday night I finished up the power steering lines. I'm not crazy about the routing but did not want to bend the return tube on the pump to much. Still trying to find some nice looking claps to do away with what I have now. I'm thinking about going with Kugel Komponents clamps but haven't made my mind up yet.

The heater delete plate form Oklahomaduner came in yesterday. Austin is a super nice guy to deal with.

sdailey · 06-22-2011, 10:41 AM

I've been waiting for an update.

Looking good Greg.

greg65 · 06-22-2011, 12:54 PM

Quote:

Originally Posted by sdailey

I've been waiting for an update.

Looking good Greg.

Thanks but speaking of updates it has been a month and a half since your last pictures. You got to show us how close you are to sticking Patches in the mudhole.

sdailey · 06-22-2011, 03:13 PM

Ok, I caved in and made a small update to my build.

Not much progress to report though.

**FRENCHBLUE72** · 06-22-2011, 09:17 PM

Have you checked out the made just for you clamps? They are very nice and come in many colors..

greg65 · 07-12-2011, 01:18 PM

Have not done alot lately to the truck. I did manage to get my new steering gear mounted. Also shortened the steering shaft to work with the power steering setup. All that is left is to weld the shaft to the steering coupler.

torkerjr · 07-12-2011, 04:58 PM

lookin good man...

greg65 · 07-12-2011, 05:09 PM

Quote:

Originally Posted by torkerjr

lookin good man...

Thanks. Just checked out your progress and can't wait to see it in person.

torkerjr · 07-12-2011, 06:28 PM

You will soon i hope.. Im hope that i can drop the motor off at my dads friends shop this week.. i still got alot of cleanin to do on the truck.. never endin..

greg65 · 10-10-2011, 09:02 PM

We have a few more weeks of football left so now I can work on the truck. Tonight I decided to grind down the welds from three months ago. Maybe in a few days I can install the column back in the truck.

Alan's Classic · 10-10-2011, 09:37 PM

Greg, did you remove the collapsable shaft?

greg65 · 10-10-2011, 10:22 PM

Quote:

Originally Posted by Alan's Classic

Greg, did you remove the collapsable shaft?

This auto column was a one piece shaft. After mounting p/s gear I cut the shaft, slid it into the ragjoint coupler and tacked in place. Trucks equiped with p/s might have the collapsable shaft but i'm not sure.

Alan's Classic · 10-10-2011, 10:33 PM

I believe I have an extra shaft at work. I can Check the splines on it if your interested.
Posted via Mobile Device

198plus · 10-10-2011, 11:58 PM

Lookin good Greg

torkerjr · 10-11-2011, 06:53 AM

lookin good greg!!

greg65 · 10-11-2011, 09:21 AM

Quote:

Originally Posted by Alan's Classic

I believe I have an extra shaft at work. I can Check the splines on it if your interested.
Posted via Mobile Device

I have a couple of lower shafts from 67-72 era trucks. On this column the only splines are located up by the steering wheel. It does not seperate like the later years. Thank you for the offer and maybe we can discuss it Saturday at the get together.

greg65 · 10-11-2011, 09:24 AM

Quote:

Originally Posted by 198plus

Lookin good Greg

Thanks Ronnie. I hope to one day see your truck in person. Great looking truck.

greg65 · 10-11-2011, 09:25 AM

Quote:

Originally Posted by torkerjr

lookin good greg!!

Thanks. Any updates on your truck?

65Custom · 10-11-2011, 10:26 PM

Nice!!! Making progress Looking great

Woogeroo · 10-11-2011, 10:40 PM

check it out, it has parts on it and stuff.... way to go.

-W

torkerjr · 10-11-2011, 11:21 PM

some... the front end is in for good now. bags workin great too. goin to summit after my nephews game on saturday and get some stuff.

Alan's Classic · 10-12-2011, 12:15 AM

BTW, nice job, I was jus tlooking out for your safety.

06-17-2011, 03:35 PM	#203
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread My last russell fitting come in today along with Parker compression to -6an fitting from Shannon. Maybe I can find a little time this weekend to install them. The part numbers are russell 620401 6an straight endura hose end Parker 6xhbu-ss 6an to compression fitting here is a link to Parker http://www.parker.com/portal/site/PA...vgnextpartno=6 XHBU-SS&vgnextdiv=687620&vgnextcatid=2638985&configtype= I will try to add pictures this weekend. __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

06-22-2011, 10:26 AM	#204
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Monday night I finished up the power steering lines. I'm not crazy about the routing but did not want to bend the return tube on the pump to much. Still trying to find some nice looking claps to do away with what I have now. I'm thinking about going with Kugel Komponents clamps but haven't made my mind up yet. The heater delete plate form Oklahomaduner came in yesterday. Austin is a super nice guy to deal with. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

06-22-2011, 10:41 AM	#205
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Greg65 build thread I've been waiting for an update. Looking good Greg. __________________ Shannon

06-22-2011, 03:13 PM	#207
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Greg65 build thread Ok, I caved in and made a small update to my build. Not much progress to report though. __________________ Shannon

06-22-2011, 09:17 PM	#208
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Greg65 build thread Have you checked out the made just for you clamps? They are very nice and come in many colors.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-12-2011, 01:18 PM	#209
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Have not done alot lately to the truck. I did manage to get my new steering gear mounted. Also shortened the steering shaft to work with the power steering setup. All that is left is to weld the shaft to the steering coupler. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

07-12-2011, 04:58 PM	#210
torkerjr Registered User Join Date: Oct 2009 Location: Dallas ga Posts: 147	Re: Greg65 build thread lookin good man... __________________ It's like christmas it's comin!!! smoke

07-12-2011, 06:28 PM	#212
torkerjr Registered User Join Date: Oct 2009 Location: Dallas ga Posts: 147	Re: Greg65 build thread You will soon i hope.. Im hope that i can drop the motor off at my dads friends shop this week.. i still got alot of cleanin to do on the truck.. never endin.. __________________ It's like christmas it's comin!!! smoke

10-10-2011, 09:02 PM	#213
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread We have a few more weeks of football left so now I can work on the truck. Tonight I decided to grind down the welds from three months ago. Maybe in a few days I can install the column back in the truck. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

10-10-2011, 09:37 PM	#214
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread Greg, did you remove the collapsable shaft? __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

10-10-2011, 10:33 PM	#216
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread I believe I have an extra shaft at work. I can Check the splines on it if your interested. Posted via Mobile Device __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

10-10-2011, 11:58 PM	#217
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Greg65 build thread Lookin good Greg __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

10-11-2011, 06:53 AM	#218
torkerjr Registered User Join Date: Oct 2009 Location: Dallas ga Posts: 147	Re: Greg65 build thread lookin good greg!! __________________ It's like christmas it's comin!!! smoke

10-11-2011, 10:26 PM	#222
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 484	Re: Greg65 build thread Nice!!! Making progress Looking great __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

10-11-2011, 10:40 PM	#223
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: Greg65 build thread check it out, it has parts on it and stuff.... way to go. -W



Register or Log In To remove these advertisements.

10-11-2011, 11:21 PM	#224
torkerjr Registered User Join Date: Oct 2009 Location: Dallas ga Posts: 147	Re: Greg65 build thread some... the front end is in for good now. bags workin great too. goin to summit after my nephews game on saturday and get some stuff. __________________ It's like christmas it's comin!!! smoke

10-12-2011, 12:15 AM	#225
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread BTW, nice job, I was jus tlooking out for your safety. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

Register or Log In To remove these advertisements.