K5 Blazer emblem location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamradrz1 · 03-25-2009, 08:53 PM

I've searched past threads for this info and I have the assembly book but it tells you the distance between the holes not where on the fender to put the holes can someone help with this info? Like inches from top or bottom of fender and to the door edge side of fender.

Thanks, in advance

CDA 455 · 03-25-2009, 09:35 PM

Quote:

Originally Posted by teamradrz1

I've searched past threads for this info and I have the assembly book but it tells you the distance between the holes not where on the fender to put the holes can someone help with this info? Like inches from top or bottom of fender and to the door edge side of fender.

Thanks, in advance

Which emblem(s) are you referring to?

teamradrz1 · 03-25-2009, 10:46 PM

The actual K/5_Blazer emblem thats on the front fenders just before the door.

hotrodhomi · 03-25-2009, 10:50 PM

I've searched for this info, but have never found it. I figured when it can time for me to actually install my emblems that I would just measure another blazer.

teamradrz1 · 03-26-2009, 12:12 AM

Yeah I'm at that point now need the info tonight or tomorrow morning drilling the holes tomorrow.

hotrodhomi · 03-26-2009, 12:31 AM

do you have your fenders off. or inner fender? I heard one side is almost impossible to do with the inner fender mounted.

bouncytruck · 03-26-2009, 12:47 AM

One side is almost impossible with the fender on. You'll need to remove the inner fenders for both sides unless you have really small hands and long skinny arms.

Sorry, don't have the measurements. My emblems are on so I can't tell where the holes are.

teamradrz1 · 03-26-2009, 12:51 AM

Quote:

Originally Posted by bouncytruck

One side is almost impossible with the fender on. You'll need to remove the inner fenders for both sides unless you have really small hands and long skinny arms.

Sorry, don't have the measurements. My emblems are on so I can't tell where the holes are.

That why I need the measurements, BEFORE reassembly truck is being painted on Saturday.

hotrodhomi · 03-26-2009, 01:22 AM

Quote:

Originally Posted by bouncytruck

One side is almost impossible with the fender on. You'll need to remove the inner fenders for both sides unless you have really small hands and long skinny arms.

Sorry, don't have the measurements. My emblems are on so I can't tell where the holes are.

you could measure to the top of the emblem from the top of the fender. from the edge of the fender to the edge of the emblem.

That might help him get really close.

jaros44sr · 03-26-2009, 06:56 AM

Not sure if pick up fenders and blazer/jimmy fenders are the same when it comes to mounting emblems, but if the distance between your mounting pins on your emblem is 6 3/4" I can help you with a pic. and measurements...

teamradrz1 · 03-26-2009, 11:31 AM

Quote:

Originally Posted by jaros44sr

Not sure if pick up fenders and blazer/jimmy fenders are the same when it comes to mounting emblems, but if the distance between your mounting pins on your emblem is 6 3/4" I can help you with a pic. and measurements...

I can start with that at least that should give me the correct hight of where it goes.
Thanks

Critter · 03-26-2009, 03:04 PM

I know it doesn't fully answer you question, but here's what the factory assembly manual has to say. Sorry, I don't have access to a scanner so I took some pics with my digicam.

jaros44sr · 03-26-2009, 04:12 PM

The holes on my fender are 9 3/4" from the top of the fender

hotrodhomi · 03-26-2009, 05:52 PM

Quote:

Originally Posted by jaros44sr

The holes on my fender are 9 3/4" from the top of the fender

that helps because the assembly manual only shows the distance between the holes, not where that are located on the fender.

red71cheyenne · 03-27-2009, 01:17 AM

Here's the last set of pictures I took for this. Distances are from the ridge at the bottom of fender and edge of the rear of fender.

teamradrz1 · 03-27-2009, 01:28 AM

Awesome! Thanks for everyone's help.

Pictures of my project comming soon!

03-25-2009, 08:53 PM	#1
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	K5 Blazer emblem location I've searched past threads for this info and I have the assembly book but it tells you the distance between the holes not where on the fender to put the holes can someone help with this info? Like inches from top or bottom of fender and to the door edge side of fender. Thanks, in advance __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

03-25-2009, 10:46 PM	#3
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: K5 Blazer emblem location The actual K/5_Blazer emblem thats on the front fenders just before the door. __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

03-25-2009, 10:50 PM	#4
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: K5 Blazer emblem location I've searched for this info, but have never found it. I figured when it can time for me to actually install my emblems that I would just measure another blazer. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

03-26-2009, 12:12 AM	#5
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: K5 Blazer emblem location Yeah I'm at that point now need the info tonight or tomorrow morning drilling the holes tomorrow. __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

03-26-2009, 12:31 AM	#6
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: K5 Blazer emblem location do you have your fenders off. or inner fender? I heard one side is almost impossible to do with the inner fender mounted. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

03-26-2009, 12:47 AM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: K5 Blazer emblem location One side is almost impossible with the fender on. You'll need to remove the inner fenders for both sides unless you have really small hands and long skinny arms. Sorry, don't have the measurements. My emblems are on so I can't tell where the holes are. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-26-2009, 06:56 AM	#10
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,423	Re: K5 Blazer emblem location Not sure if pick up fenders and blazer/jimmy fenders are the same when it comes to mounting emblems, but if the distance between your mounting pins on your emblem is 6 3/4" I can help you with a pic. and measurements... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-26-2009, 03:04 PM	#12
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: K5 Blazer emblem location I know it doesn't fully answer you question, but here's what the factory assembly manual has to say. Sorry, I don't have access to a scanner so I took some pics with my digicam. Attached Images __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

03-26-2009, 04:12 PM	#13
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,423	Re: K5 Blazer emblem location The holes on my fender are 9 3/4" from the top of the fender __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-27-2009, 01:17 AM	#15
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: K5 Blazer emblem location Here's the last set of pictures I took for this. Distances are from the ridge at the bottom of fender and edge of the rear of fender. Attached Images __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

03-27-2009, 01:28 AM	#16
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	Re: K5 Blazer emblem location Awesome! Thanks for everyone's help. Pictures of my project comming soon! __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.