The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-07-2015, 10:25 PM   #1
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 798
Wiper Squirter Tubing - Where it Goes?

Tearing down my 70 I found that my wiper motor has a couple tubes coming off it that are sliced from the last owner, and a grommet on the firewall that has three holes in it, looks factory I'd say considering Brothers sells one exactly like it.

My question - can someone on here show me some pictures and give some insight on how to make this stock again? I'd like to have it working and set up properly just incase I need it. Thanks.

Vehicle: 1970 Chevrolet C/10 (if that even matters)

Kyle.
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is online now   Reply With Quote
Old 10-07-2015, 11:48 PM   #2
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,270
Re: Wiper Squirter Tubing - Where it Goes?

Quote:
Originally Posted by KyleSeal View Post
Tearing down my 70 I found that my wiper motor has a couple tubes coming off it that are sliced from the last owner, and a grommet on the firewall that has three holes in it, looks factory I'd say considering Brothers sells one exactly like it.

My question - can someone on here show me some pictures and give some insight on how to make this stock again? I'd like to have it working and set up properly just incase I need it. Thanks.

Vehicle: 1970 Chevrolet C/10 (if that even matters)

Kyle.

It's pretty simple really. The two smaller tubes go to the squirters (nozzles) and the bigger tube goes to the bottle. Getting them working is a crap shoot at best. You can buy a kit to repair the pump but they don't always work after the re-build....

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 10-08-2015, 12:01 AM   #3
FirstOwner69
Senior Member
 
FirstOwner69's Avatar
 
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,835
Re: Wiper Squirter Tubing - Where it Goes?

Here are a couple pictures that should help.
Attached Images
  
FirstOwner69 is offline   Reply With Quote
Old 10-10-2015, 12:10 AM   #4
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 798
Re: Wiper Squirter Tubing - Where it Goes?

When you talk about the pump are you talking about the one mounted in the engine bay?
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is online now   Reply With Quote
Old 10-10-2015, 12:28 AM   #5
FirstOwner69
Senior Member
 
FirstOwner69's Avatar
 
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,835
Re: Wiper Squirter Tubing - Where it Goes?

The windshield washer pump is attached to the wiper motor on the firewall inside the cab at about 2 o'clock from the upper corner of the instrument cluster opening in the dash. That's what the 3 hoses that go through the grommet attach to. It's a real pain to get at, especially if you have A/C.

EDIT: Changed wiper motor clock position to 2 o'clock.

Last edited by FirstOwner69; 10-10-2015 at 12:41 AM.
FirstOwner69 is offline   Reply With Quote
Old 10-10-2015, 02:33 AM   #6
Gromit
Registered User
 
Join Date: Jul 2015
Location: Central Coast, CA
Posts: 498
Re: Wiper Squirter Tubing - Where it Goes?

I have a '70 as well, so this will be another few views Photos attached)

I put yellow paint spots on the hoses 'cause by the time I got out of the cab and walked to the front I had forgotten which was which..

The PO put an aftermarket washer pump so probably that won't help you much; but the hoses should be similar.
Attached Images
    
Gromit is offline   Reply With Quote
Old 10-10-2015, 08:06 AM   #7
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,270
Re: Wiper Squirter Tubing - Where it Goes?

Quote:
Originally Posted by KyleSeal View Post
When you talk about the pump are you talking about the one mounted in the engine bay?

There is no pump in the engine bay unless someone has added an aftermarket one.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 10-11-2015, 11:32 AM   #8
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 798
Re: Wiper Squirter Tubing - Where it Goes?

Thanks for all the help you guys, really helped me figure out what was going on with my truck. It's currently in teardown so the wiper motor should be easy for me to get to and replace that pump, unfortunately the last owner was a real 'hack job' to the fullest meaning. The old washer pump and bucket lines didn't go anywhere and the little info on this subject on the internet really left me confused, so this helped a ton, thanks!

Kyle.
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is online now   Reply With Quote
Old 10-11-2015, 05:34 PM   #9
Redline novdog
Registered User
 
Redline novdog's Avatar
 
Join Date: Jan 2012
Location: Washington,Il
Posts: 632
Re: Wiper Squirter Tubing - Where it Goes?

If the truck you're working on is your avatar,then way cool truck!! I would imagine that the washer hoses will be the least of your worries if you're in tear down mode. Good luck have fun,learn and lean on the forum! great knowledge here!!
__________________
It builds on my intelligence when I make a mistake, Boy am I building on it!
'67 C-10,'70 Nova SS
Redline novdog is offline   Reply With Quote
Old 10-11-2015, 07:01 PM   #10
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 798
Re: Wiper Squirter Tubing - Where it Goes?

Redline - Thanks! I'm glad to say its mine, first C10 and well first project truck/car ever so you'll probably see me floating around on this board a lot. Nice '67 by the way, love that year. I was about to buy one for about $600 until someone stole the keys so I couldn't buy it.
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is online now   Reply With Quote
Old 10-11-2015, 07:19 PM   #11
In The Ten Ring
Registered User
 
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
Re: Wiper Squirter Tubing - Where it Goes?

I will save a link to this thread! I had expected to have to ask someone this very same question about a month from now.
In The Ten Ring is offline   Reply With Quote
Reply

Bookmarks

Tags
firewall, restoration, stock, tubes, wiper fluid

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com