Loaded and ready to go to swap meet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-01-2013, 10:06 PM

In Lawrence, Ks at the fairgrounds, I will be there from Fri 11AM till Sat 1 PM, My spots are east of car corral

teeitup · 05-01-2013, 10:07 PM

I'll basically have all the parts I for sale right now

**too much stuff** · 05-01-2013, 10:10 PM

Looks like fun. Good luck selling.
Eric

**LockDoc** · 05-01-2013, 11:40 PM

-
The Des Moines swap meet is this weekend too. I hope you have better weather than it sounds like Des Moines is going to have... Good Luck.

LockDoc

ls1nova71 · 05-01-2013, 11:41 PM

Dress warm, Randy!!! I'll be there, nothing like walking through a swap meet looking for stuff you didn't know you needed! See you saturday.

rambler · 05-01-2013, 11:53 PM

good luck on the sale.. I've got so much to do the next two weekends.. son graduating HS and wifes BD and mothers day... maybe someday I'll get mine back on the road..

teeitup · 05-02-2013, 08:20 AM

Thanks Eric, I have more fun trying to find other bargains, lol

Leon, cold and rainy, probably won't be much fun

Eric, stop by surely I'll have something for you, lol

Joe, sounds like you ahve alot on your plate, wish you could be there

Thanks Randy

468BIGBLOCK · 05-02-2013, 11:38 AM

thats a pretty good load!

teeitup · 05-02-2013, 12:41 PM

Thanks, its actually the least parts I've had for years, trucks are getting hard to find around here anymore

**AMERICAN PICK-UP** · 05-03-2013, 03:45 PM

Quote:

Originally Posted by teeitup

Thanks, its actually the least parts I've had for years, trucks are getting hard to find around here anymore

thats why i got into late model chevy truck salvage. i buy 150 a year at copart and iaa, no shortage they are just high!!!

teeitup · 05-05-2013, 09:47 AM

Well got back yesterday about 3:30, cold and wet, but did get some stuff sold and did get to meet up with about 10 board members, so that was a bonus

fastnotch89 · 05-05-2013, 09:59 AM

I need that 71-72 grill if you have the inner

teeitup · 05-05-2013, 10:22 AM

Sorry sold it at swap meet

allons · 05-05-2013, 10:42 AM

What year are the doors? I've got a '72 and I could use both doors if they're good. PM me!

mr48chev · 05-05-2013, 11:02 AM

Well, did you come home with as much new to you stuff as you took "old" stuff?
I used to go to swap meets loaded with stuff and just enough cash to pay for my space rent and then had to sell stuff to be able to buy anything.

I went to the Tri-Cities Swap meet in Kennewick, Wa yesterday and got a couple of small things for one project but didn't have enough cash on me or a way to haul a real nice pair of bedsides and tailgate that a guy had. I'm hoping he has it when I get my ss check at the end of the month. another guy had the Offy intake, four barrel and headers for my 292 and I didn't have the cash for that either but didn't expect to see that setup for sale there. I was planning on hauling a load of stuff down but had to work until 11 and didn't go until after work.

teeitup · 05-05-2013, 11:39 AM

allons, sold them at meet, sorry

mr48chev, I know what you mean, this year I actually didn't buy any other parts (for a first time). One buddy of mine found a set of 72 extreme tow hooks for $50, I didn't get out looking fast enough. As for the other parts, I didn't see anything I needed for a change, lol

71GeneralMotorsCorp · 05-05-2013, 04:28 PM

Pretty awesome meeting with you Randy. Thanks again for the swaybars, grill shell and misc. parts. I scored a few things there too.

05-01-2013, 10:06 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Loaded and ready to go to swap meet In Lawrence, Ks at the fairgrounds, I will be there from Fri 11AM till Sat 1 PM, My spots are east of car corral Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-01-2013, 10:07 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Loaded and ready to go to swap meet I'll basically have all the parts I for sale right now Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-01-2013, 10:10 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Loaded and ready to go to swap meet Looks like fun. Good luck selling. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-01-2013, 11:40 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,333	Re: Loaded and ready to go to swap meet - The Des Moines swap meet is this weekend too. I hope you have better weather than it sounds like Des Moines is going to have... Good Luck. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-01-2013, 11:41 PM	#5
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Loaded and ready to go to swap meet Dress warm, Randy!!! I'll be there, nothing like walking through a swap meet looking for stuff you didn't know you needed! See you saturday. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

05-01-2013, 11:53 PM	#6
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: Loaded and ready to go to swap meet good luck on the sale.. I've got so much to do the next two weekends.. son graduating HS and wifes BD and mothers day... maybe someday I'll get mine back on the road.. __________________ No matter where you are..... There you are... Buckaroo Banzi

05-02-2013, 08:20 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Loaded and ready to go to swap meet Thanks Eric, I have more fun trying to find other bargains, lol Leon, cold and rainy, probably won't be much fun Eric, stop by surely I'll have something for you, lol Joe, sounds like you ahve alot on your plate, wish you could be there Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-02-2013, 11:38 AM	#8
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: Loaded and ready to go to swap meet thats a pretty good load! __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

05-02-2013, 12:41 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Loaded and ready to go to swap meet Thanks, its actually the least parts I've had for years, trucks are getting hard to find around here anymore __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-05-2013, 09:47 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Loaded and ready to go to swap meet Well got back yesterday about 3:30, cold and wet, but did get some stuff sold and did get to meet up with about 10 board members, so that was a bonus __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-05-2013, 09:59 AM	#12
fastnotch89 Registered User Join Date: Apr 2013 Location: Clover,SC Posts: 142	Re: Loaded and ready to go to swap meet I need that 71-72 grill if you have the inner

05-05-2013, 10:22 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Loaded and ready to go to swap meet Sorry sold it at swap meet __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-05-2013, 10:42 AM	#14
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: Loaded and ready to go to swap meet What year are the doors? I've got a '72 and I could use both doors if they're good. PM me!

05-05-2013, 11:02 AM	#15
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,319	Re: Loaded and ready to go to swap meet Well, did you come home with as much new to you stuff as you took "old" stuff? I used to go to swap meets loaded with stuff and just enough cash to pay for my space rent and then had to sell stuff to be able to buy anything. I went to the Tri-Cities Swap meet in Kennewick, Wa yesterday and got a couple of small things for one project but didn't have enough cash on me or a way to haul a real nice pair of bedsides and tailgate that a guy had. I'm hoping he has it when I get my ss check at the end of the month. another guy had the Offy intake, four barrel and headers for my 292 and I didn't have the cash for that either but didn't expect to see that setup for sale there. I was planning on hauling a load of stuff down but had to work until 11 and didn't go until after work. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-05-2013, 11:39 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Loaded and ready to go to swap meet allons, sold them at meet, sorry mr48chev, I know what you mean, this year I actually didn't buy any other parts (for a first time). One buddy of mine found a set of 72 extreme tow hooks for $50, I didn't get out looking fast enough. As for the other parts, I didn't see anything I needed for a change, lol __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

05-05-2013, 04:28 PM	#17
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: Loaded and ready to go to swap meet Pretty awesome meeting with you Randy. Thanks again for the swaybars, grill shell and misc. parts. I scored a few things there too. __________________ "Repetition penetrates even the dullest of minds"

Register or Log In To remove these advertisements.