CA Parting Out 86 Scottsdale 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 09-29-2009, 02:32 PM

Not a whole lot of parts here. Its a long bed 1/2 ton. Dash, door panels, and wheels already gone. I have several other trucks that myself, my wife, and my mother-in-law will be racing at the Marysville trailer races on Oct. 24th. Interior and other parts not needed for these to run are also available now and those trucks will be parted out after the race. Thanks, Ray
grany 4 speed- $150 local only
np 208 $150 local only
axles $300pr. local only
side mirrors $25pr.
visors saddle $20pr.
gas tank brackets $40 set
v6 carb $20
air cleaner $20
The v6 engine is gone. Any other parts just ask in thread. Prices do NOT include shipping. Pics coming soon.

cowboy5683 · 09-29-2009, 03:17 PM

Curious about the other truck parts and years?..Ifa any of em are 73-80 lemme know I will wanna take a look and possibly buy dash pad and other interior stuf..lemme know..thanx!

hessian18 · 09-29-2009, 03:46 PM

Any more info on the rear axle ? Gears, lug pattern ? 10,12 bolt ?

Thanks

KrazyRay · 09-29-2009, 04:28 PM

Quote:

Originally Posted by hessian18

Any more info on the rear axle ? Gears, lug pattern ? 10,12 bolt ?

Thanks

The rear axle is a 10 bolt, 6 lug but I can't find the ID tag for the gear ratio.

cowboy5683 · 09-29-2009, 04:53 PM

Wondering if ya could post a pic of the orangeish dash?..Not worried bout color..will dye it..What would ya want for it?..I will take it if reasonable as I am sure it will be.

KrazyRay · 10-04-2009, 10:46 PM

Quote:

Originally Posted by cowboy5683

Wondering if ya could post a pic of the orangeish dash?..Not worried bout color..will dye it..What would ya want for it?..I will take it if reasonable as I am sure it will be.

The dash pad is $60 but the shipping will be around $60 as well. I might be hauling a trailer load of parts to Ontario so maybe the shipping can be eliminated.

KrazyRay · 10-04-2009, 10:41 PM

Quote:

Originally Posted by hessian18

Any more info on the rear axle ? Gears, lug pattern ? 10,12 bolt ?

Thanks

The spid shows the gears as being 3.73 with posi.

KrazyRay · 09-29-2009, 04:25 PM

Quote:

Originally Posted by cowboy5683

Curious about the other truck parts and years?..Ifa any of em are 73-80 lemme know I will wanna take a look and possibly buy dash pad and other interior stuf..lemme know..thanx!

One of the trucks is a 77 custom 20 with an orangish dash pad in great cond. another one is a 79 bonanza 20 with a nice tilt but mostly trashed interior. Also, I have a 76 custom 10 with not much interior left. The others are a 84 custom 20, 84 silverado, and a 87 gmc sierra 2500.

el cocho · 10-03-2009, 04:18 AM

whould you happen to have duct work for a/c,heat from center of dash to vent on left side of steering wheel? thanks

KrazyRay · 10-05-2009, 07:47 PM

Quote:

Originally Posted by el cocho

whould you happen to have duct work for a/c,heat from center of dash to vent on left side of steering wheel? thanks

Yes, I have all of the ducting. There is a long piece that goes across under the column and another that elbows to the dash. Let me know how many pieces you need. Thanks, Ray

KrazyRay · 10-06-2009, 11:58 PM

I removed a few parts today and I'm looking to have everything off by the weekend.
Side markers $12 shipped
AC/heater control $20 shipped
horns $15 shipped
mirror $15 shipped
inside door handles $20 shipped
saddle seat belts $30 shipped
window cranks $12 shipped
4 speed boot $20 shipped
208 shifter cover $25 shipped
208 chrome shifter $25 shipped

KrazyRay · 10-07-2009, 12:04 AM

more pics

cowboy5683 · 10-07-2009, 12:26 AM

I will take the inside door handles and cups..lemme know yer paypal info and i will paypal ya the money on friday or saturday.

KrazyRay · 10-03-2009, 08:00 PM

Orangish dash pics...

cyberpine · 10-18-2009, 09:27 AM

will that dash fit an 87 C10 2wd?

KrazyRay · 10-18-2009, 09:39 AM

Quote:

Originally Posted by cyberpine

will that dash fit an 87 C10 2wd?

No, it only fits the earlier years. Also it is sold pending shipping. Thanks, Ray

KrazyRay · 10-23-2009, 12:21 AM

208 shifter knob

KrazyRay · 11-15-2009, 03:08 PM

87 gmc fender badges

KrazyRay · 10-03-2009, 08:21 PM

pics

KrazyRay · 10-03-2009, 08:23 PM

more pics..

ECU PIRATE · 11-17-2009, 05:53 PM

Quote:

Originally Posted by KrazyRay

more pics..

What can you do for the brake / clutch pedal assmebly and all of the assorted linkage ( frame Z bar bracket, Z bar , clutch pedal return spring, clutch fork return spring, frame side ball stud & block side ball stud, upper & lower push rods)? Seems like a lot but, I am trying to cover my bases and plan this project well. I am looking to do a manual trans swap on my 77' 2wd Blazer project.

Mike

KrazyRay · 11-17-2009, 06:30 PM

Quote:

Originally Posted by ECU PIRATE

What can you do for the brake / clutch pedal assmebly and all of the assorted linkage ( frame Z bar bracket, Z bar , clutch pedal return spring, clutch fork return spring, frame side ball stud & block side ball stud, upper & lower push rods)? Seems like a lot but, I am trying to cover my bases and plan this project well. I am looking to do a manual trans swap on my 77' 2wd Blazer project.

Mike

Sorry, I don't have the linkage style clutch.

bigdnew · 11-17-2009, 08:20 PM

pm sent

KrazyRay · 11-20-2009, 01:37 AM

Quote:

Originally Posted by ECU PIRATE

What can you do for the brake / clutch pedal assmebly and all of the assorted linkage ( frame Z bar bracket, Z bar , clutch pedal return spring, clutch fork return spring, frame side ball stud & block side ball stud, upper & lower push rods)? Seems like a lot but, I am trying to cover my bases and plan this project well. I am looking to do a manual trans swap on my 77' 2wd Blazer project.

Mike

I have an 80 c10 that rolled in today. Its a 6-250 with a manual 3 speed. I'll check by this weekend if all of the clutch stuff is there. Thanks, Ray

mainermikeyd · 10-04-2009, 02:47 AM

the 87 gmc any badges, in good usable shape??

09-29-2009, 02:32 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting Out 86 Scottsdale 4x4 Not a whole lot of parts here. Its a long bed 1/2 ton. Dash, door panels, and wheels already gone. I have several other trucks that myself, my wife, and my mother-in-law will be racing at the Marysville trailer races on Oct. 24th. Interior and other parts not needed for these to run are also available now and those trucks will be parted out after the race. Thanks, Ray grany 4 speed- $150 local only np 208 $150 local only axles $300pr. local only side mirrors $25pr. visors saddle $20pr. gas tank brackets $40 set v6 carb $20 air cleaner $20 The v6 engine is gone. Any other parts just ask in thread. Prices do NOT include shipping. Pics coming soon.

09-29-2009, 03:17 PM	#2
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting Out 86 Scottsdale 4x4 Curious about the other truck parts and years?..Ifa any of em are 73-80 lemme know I will wanna take a look and possibly buy dash pad and other interior stuf..lemme know..thanx!

09-29-2009, 03:46 PM	#3
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: Parting Out 86 Scottsdale 4x4 Any more info on the rear axle ? Gears, lug pattern ? 10,12 bolt ? Thanks __________________ ---Bob--- '81 Long Box. 2005 5.3l Vortec and 2005 4L80e coming soon...

09-29-2009, 04:53 PM	#5
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting Out 86 Scottsdale 4x4 Wondering if ya could post a pic of the orangeish dash?..Not worried bout color..will dye it..What would ya want for it?..I will take it if reasonable as I am sure it will be.

10-03-2009, 04:18 AM	#9
el cocho Registered User Join Date: Sep 2009 Location: phx,az` Posts: 27	Re: Parting Out 86 Scottsdale 4x4 whould you happen to have duct work for a/c,heat from center of dash to vent on left side of steering wheel? thanks

10-06-2009, 11:58 PM	#11
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 I removed a few parts today and I'm looking to have everything off by the weekend. Side markers $12 shipped AC/heater control $20 shipped horns $15 shipped mirror $15 shipped inside door handles $20 shipped saddle seat belts $30 shipped window cranks $12 shipped 4 speed boot $20 shipped 208 shifter cover $25 shipped 208 chrome shifter $25 shipped Attached Images

10-07-2009, 12:04 AM	#12
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 more pics Attached Images

10-07-2009, 12:26 AM	#13
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting Out 86 Scottsdale 4x4 I will take the inside door handles and cups..lemme know yer paypal info and i will paypal ya the money on friday or saturday.

10-03-2009, 08:00 PM	#14
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 Orangish dash pics... Attached Images

10-18-2009, 09:27 AM	#15
cyberpine Registered User Join Date: Jul 2009 Location: Miami, FL Posts: 85	Re: Parting Out 86 Scottsdale 4x4 will that dash fit an 87 C10 2wd? __________________ ----------------- JC (Cyberpine) My 1987 C10 Short Bed (click on slideshow to see full album)

10-23-2009, 12:21 AM	#17
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 208 shifter knob Attached Images

11-15-2009, 03:08 PM	#18
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 87 gmc fender badges Attached Images

10-03-2009, 08:21 PM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 pics Attached Images

10-03-2009, 08:23 PM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 more pics.. Attached Images

11-17-2009, 08:20 PM	#23
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: Parting Out 86 Scottsdale 4x4 pm sent



Register or Log In To remove these advertisements.

10-04-2009, 02:47 AM	#25
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: Parting Out 86 Scottsdale 4x4 the 87 gmc any badges, in good usable shape?? __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

Register or Log In To remove these advertisements.