KS Parting 67 GMC CST V6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 09-14-2013, 01:28 PM

I bought this truck for the seat and It will be the only thing I remove from the truck! Its a 1967 CST Large window Buddy bucket with a V6,power-loc rear, No PB or A/C.
I bought it from the original owner. front end, inside and everything seems to have never been removed but I cant tell for sure if the truck has been painted. The front fender, inner and core support is rust free except for the very small dent on the front fender.
The gaps are great and everything closes and lines up real well.
I have the protecto-plate, owners manual and other documents that I will attach the pics of it below too.

I didn't sell it whole so I'm parting it out starting tomorrow.
Here's a link to the for sale thread until I get pics loaded.
http://67-72chevytrucks.com/vboard/c...gmc-cst&cat=12
Front passenger fender is sold!

Here are a few prices. Ask about anything you see.
Horn cap and all hardware...$100 shipped
D/s fender $75
Inner fenders look rust free $75 for p/s $50 for d/s
Hood has a dent on the leading edge $ 50
Motor and tranny $300 (didn't try to start it yet)
Rear end $350
Fiberglass topper $150

Mike
http://67-72chevytrucks.com/vboard/c...2/CST1_006.jpg
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

**Oddfire** · 09-14-2013, 01:47 PM

What shape is the forward light wiring harness in? Jamie 71

Longhorn

**jabborabbo** · 09-14-2013, 01:48 PM

I'm interested in the armrests and the sunvisor clips if they're fawn - how much to ship to 35750?

Thanks!

mo · 09-14-2013, 01:49 PM

Put me in line for the fender badges pending pics please
Posted via Mobile Device

**Cash3481** · 09-14-2013, 01:58 PM

Quote:

Originally Posted by Oddfire

What shape is the forward light wiring harness in? Jamie 71

Longhorn

Ill check it out and post back.

Quote:

Originally Posted by jabborabbo

I'm interested in the armrests and the sunvisor clips if they're fawn - how much to ship to 35750?
Interior is blue... Sorry
Thanks!

Quote:

Originally Posted by mo

Put me in line for the fender badges pending pics please
Posted via Mobile Device

Ill get the pics in a few hours.

There is a lot of pics in the truck for sale thread guys.ill get em posted later.
Posted via Mobile Device

**Cash3481** · 09-14-2013, 05:59 PM

Quote:

Originally Posted by Oddfire

What shape is the forward light wiring harness in? Jamie 71

Longhorn

From looks of it the front harness has never been removed. No breaks or cuts anywhere. I can take a picture of it removed if you like
Posted via Mobile Device

**Oddfire** · 09-14-2013, 06:21 PM

I need to find out if the alternator & voltage regulator hookups for the V6 engine are the same as a small block V8. If this is true i'd like to see some pics of the harness. If not i cannot use. Thanks Jamie

gdavis · 09-14-2013, 06:26 PM

how about horns did it have any. both horns and harness to 34446

**Cash3481** · 09-14-2013, 06:32 PM

Quote:

Originally Posted by Oddfire

What shape is the forward light wiring harness in? Jamie 71

Longhorn

From looks of it the front harness has never been removed. No breaks or cuts anywhere. I can take a picture of it removed if you like
Posted via Mobile Device

**Cash3481** · 09-14-2013, 06:36 PM

Here are some pics
Posted via Mobile Device

**Cash3481** · 09-14-2013, 06:39 PM

More pics
Posted via Mobile Device

**Cash3481** · 09-14-2013, 06:40 PM

Emblems
Posted via Mobile Device

**Tim Christian** · 09-14-2013, 06:45 PM

How much for the glove box door?

Vintage Windmills · 09-14-2013, 06:56 PM

How good are the headlight chrome buckets and how much shipped to 55020?

**Cash3481** · 09-14-2013, 07:18 PM

Documents

**Cash3481** · 09-14-2013, 07:28 PM

[quote=Tim Christian;6269157]How much for the glove box door?[/QUOTE
Tim,
$40 shipped pics below

Quote:

Originally Posted by Vintage Windmills

How good are the headlight chrome buckets and how much shipped to 55020?

Vintage Windmills,
$35 shipped. They. Are startingcto show some rust. Pic below as well.
Posted via Mobile Device

kingsolver72 · 09-14-2013, 07:30 PM

How much for the steering wheel? Really don't need the cap. I have a chevy. Also what kind of shape is the dash pad in?
Posted via Mobile Device

Vintage Windmills · 09-14-2013, 07:31 PM

Thanks for the pic, am going to keep looking for less rusty ones. Thanks anyways.

**Cash3481** · 09-14-2013, 07:44 PM

Dash pics.
it has no tears or rips. Just a spot in the center where there is some glue from velcro or something. It will come off. $60 if your picking it up or ill get a shipping quote.
mike
Posted via Mobile Device

**Cash3481** · 09-14-2013, 07:51 PM

Quote:

Originally Posted by kingsolver72

How much for the steering wheel? Really don't need the cap. I have a chevy. Also what kind of shape is the dash pad in?
Posted via Mobile Device

Sorry I'll take $25 for the wheel since it has cracks all over it.

Quote:

Originally Posted by Vintage Windmills

Thanks for the pic, am going to keep looking for less rusty ones. Thanks anyways.

I have another set. I'll look at them and pm you if they are in better condition.

Mike
Posted via Mobile Device

**Cash3481** · 09-14-2013, 07:56 PM

Quote:

Originally Posted by Oddfire

What shape is the forward light wiring harness in? Jamie 71

Longhorn

harness looks exactly the same but I'll get another pic for you. The alt harness is routed to the pass side over the water pump. Very long pigtail but like I said it's uncut. $80 shipped

Quote:

Originally Posted by jabborabbo

I'm interested in the armrests and the sunvisor clips if they're fawn - how much to ship to 35750?

Thanks!

The interior is blue!

Quote:

Originally Posted by mo

Put me in line for the fender badges pending pics please
Posted via Mobile Device

$60 shipped on the badges because of the light pitting.
Posted via Mobile Device

duallyjams · 09-14-2013, 08:12 PM

interested in the air cleaner, ignition switch with key plus does the key match the doors locks, tail gate

**Tim Christian** · 09-14-2013, 08:58 PM

Does that include hinge, stop arm, Button and hardware? Also how much for radio with knobs/mounting hardware?

67ctener · 09-14-2013, 09:14 PM

How much for radio if still available? Thanks
Posted via Mobile Device

badazmalibu · 09-14-2013, 09:17 PM

I am willing to purchase all of the side trim if we can agree on a price and you are willing to ship it

09-14-2013, 01:28 PM	#1
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Parting 67 GMC CST V6 I bought this truck for the seat and It will be the only thing I remove from the truck! Its a 1967 CST Large window Buddy bucket with a V6,power-loc rear, No PB or A/C. I bought it from the original owner. front end, inside and everything seems to have never been removed but I cant tell for sure if the truck has been painted. The front fender, inner and core support is rust free except for the very small dent on the front fender. The gaps are great and everything closes and lines up real well. I have the protecto-plate, owners manual and other documents that I will attach the pics of it below too. I didn't sell it whole so I'm parting it out starting tomorrow. Here's a link to the for sale thread until I get pics loaded. http://67-72chevytrucks.com/vboard/c...gmc-cst&cat=12 Front passenger fender is sold! Here are a few prices. Ask about anything you see. Horn cap and all hardware...$100 shipped D/s fender $75 Inner fenders look rust free $75 for p/s $50 for d/s Hood has a dent on the leading edge $ 50 Motor and tranny $300 (didn't try to start it yet) Rear end $350 Fiberglass topper $150 Mike http://67-72chevytrucks.com/vboard/c...2/CST1_006.jpg Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device

09-14-2013, 01:47 PM	#2
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting 67 GMC CST V6 What shape is the forward light wiring harness in? Jamie 71 Longhorn

09-14-2013, 01:48 PM	#3
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 741	Re: Parting 67 GMC CST V6 I'm interested in the armrests and the sunvisor clips if they're fawn - how much to ship to 35750? Thanks!

09-14-2013, 01:49 PM	#4
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting 67 GMC CST V6 Put me in line for the fender badges pending pics please Posted via Mobile Device __________________ 72 Cheyenne super swb 4x4 68 CST swb anniversary gold 67 custom swb 4x4

09-14-2013, 06:21 PM	#7
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting 67 GMC CST V6 I need to find out if the alternator & voltage regulator hookups for the V6 engine are the same as a small block V8. If this is true i'd like to see some pics of the harness. If not i cannot use. Thanks Jamie

09-14-2013, 06:26 PM	#8
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: Parting 67 GMC CST V6 how about horns did it have any. both horns and harness to 34446 __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

09-14-2013, 06:36 PM	#10
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 67 GMC CST V6 Here are some pics Posted via Mobile Device Attached Images

09-14-2013, 06:39 PM	#11
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 67 GMC CST V6 More pics Posted via Mobile Device Attached Images

09-14-2013, 06:40 PM	#12
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 67 GMC CST V6 Emblems Posted via Mobile Device Attached Images

09-14-2013, 06:45 PM	#13
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Parting 67 GMC CST V6 How much for the glove box door?

09-14-2013, 06:56 PM	#14
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC CST V6 How good are the headlight chrome buckets and how much shipped to 55020? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-14-2013, 07:18 PM	#15
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 67 GMC CST V6 Documents Attached Images

09-14-2013, 07:30 PM	#17
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,201	Re: Parting 67 GMC CST V6 How much for the steering wheel? Really don't need the cap. I have a chevy. Also what kind of shape is the dash pad in? Posted via Mobile Device __________________ Fight the good fight, finish the race, keep the faith

09-14-2013, 07:31 PM	#18
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC CST V6 Thanks for the pic, am going to keep looking for less rusty ones. Thanks anyways. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-14-2013, 07:44 PM	#19
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 67 GMC CST V6 Dash pics. it has no tears or rips. Just a spot in the center where there is some glue from velcro or something. It will come off. $60 if your picking it up or ill get a shipping quote. mike Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

09-14-2013, 08:12 PM	#22
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Parting 67 GMC CST V6 interested in the air cleaner, ignition switch with key plus does the key match the doors locks, tail gate __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-14-2013, 08:58 PM	#23
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Parting 67 GMC CST V6 Does that include hinge, stop arm, Button and hardware? Also how much for radio with knobs/mounting hardware?

09-14-2013, 09:14 PM	#24
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Parting 67 GMC CST V6 How much for radio if still available? Thanks Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

09-14-2013, 09:17 PM	#25
badazmalibu Registered User Join Date: May 2013 Location: Palm City, Fl Posts: 86	Re: Parting 67 GMC CST V6 I am willing to purchase all of the side trim if we can agree on a price and you are willing to ship it

Register or Log In To remove these advertisements.