Several items I need to buy but don't know where. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rchavez101 · 07-15-2011, 04:58 PM

Can anyone tell me where to buy the levers that go on the seat to fold the seat forward.

I would also like to know where can you buy a complete auto tranny linkage kit from the column to the tranny. Or at least some of the parts. Thanks

Lee H · 07-15-2011, 06:20 PM

Not enough info to give you any specifics like model, year, etc. Id start with the pick a parts for the linkage for sure. If 90s or newer most interior parts are still sourced by the dealer. LMC has lots of parts for new and old.
Posted via Mobile Device

rchavez101 · 07-15-2011, 07:19 PM

Quote:

Originally Posted by Lee H

Not enough info to give you any specifics like model, year, etc. Id start with the pick a parts for the linkage for sure. If 90s or newer most interior parts are still sourced by the dealer. LMC has lots of parts for new and old.
Posted via Mobile Device

Oh yeah sorry. The seats are from a 95-99 chevy extended cab. The linkage is for a 94 chevy SWB. I went to the U-Pull it and the trucks there were gutted so it was hard to find anything with linkage yet alone what it should look like. I am converting it over from a standard transmission to a 700R4.

sntrym95 · 07-15-2011, 08:37 PM

the cable is about $110 from the dealer, which was surprisingly cheaper than Autozone. The rest of the linkage should be in a column from an auto truck.

07-15-2011, 04:58 PM	#1
rchavez101 Registered User Join Date: Jun 2011 Location: Rio Rancho NM Posts: 503	Several items I need to buy but don't know where. Can anyone tell me where to buy the levers that go on the seat to fold the seat forward. I would also like to know where can you buy a complete auto tranny linkage kit from the column to the tranny. Or at least some of the parts. Thanks

07-15-2011, 06:20 PM	#2
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: Several items I need to buy but don't know where. Not enough info to give you any specifics like model, year, etc. Id start with the pick a parts for the linkage for sure. If 90s or newer most interior parts are still sourced by the dealer. LMC has lots of parts for new and old. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

07-15-2011, 08:37 PM	#4
sntrym95 Registered User Join Date: Jan 2006 Location: Big Pine Key, FL Posts: 745	Re: Several items I need to buy but don't know where. the cable is about $110 from the dealer, which was surprisingly cheaper than Autozone. The rest of the linkage should be in a column from an auto truck. __________________ Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.