can't seem to find one - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rossboss · 02-02-2003, 09:03 PM

looking for a pto to operate a pto winch, SM420 4 speed transmision. someone must of made one. Even a part # and manufacturer would help.

BLAZERMAN · 02-02-2003, 10:37 PM

The best to look for is a Chelsea, you might try ebay I see them on there often.

cleatussnow · 02-03-2003, 09:07 PM

When I bought my truck the PTO was gone as was the four speed. but the Knob and the tag was still there, here is what I have I hope it helps...

cleatussnow · 02-03-2003, 09:07 PM

another pic

ozarkhippie · 02-03-2003, 10:34 PM

I just got a 79 1 ton 4x4 with a 4spd , 205 transfercase that has a PTO mounted to the transfercase. Would it work?

rossboss · 02-03-2003, 11:42 PM

I don't think that will help, I believe the pto has to come off the transmission, my 66 has a sm420 transmision and a divorced transfer case.

Bob Chayer · 02-04-2003, 07:59 PM

I have a PTO on my '72 K20 that runs off the trans and was used to run a water pump for a well drilling rig. It only turns in one direction. You need one that powers in and out like I had on my Jeep M715. It is impossible to diconect the cable with tension on it. Can be a real problem on an incline or if you are winched up against something. Try the military guys....It's been a while but I think I remember seeing mechanical winches for sale for the later blazers they were running. Same trans SM465 but I'm not sure if it will work on a sm460. Hope this helps and I'll keep an eye out.

Bob Chayer · 02-04-2003, 08:02 PM

sorry I ment sm420

mkmiller1 · 02-04-2003, 08:13 PM

Rossboss- I think I've got what you need. It's mounted to the side of a std(dont know which kind) transmission. It is a Tulsa PTO. I can get a pic of it tomorrow for ya if ya want.
Matthew

rossboss · 02-04-2003, 10:23 PM

I would be interested if it's what I'm looking for. The shaft has to point toward the front of the truck and clear the rear motor mount. I can find all kinds that point toward the rear, but they are for opperating dump beds and such.

BLAZERMAN · 02-04-2003, 10:37 PM

Ozarkhippie, how much do you want for your pto?

rossboss · 02-04-2003, 10:57 PM

Blazerman, your last message completely escapes me, am I missing something.

BLAZERMAN · 02-04-2003, 11:27 PM

I was referring to the post made by Ozarkhippie, I was asking him how much he wants for his pto for an np-205.

ozarkhippie · 02-05-2003, 03:27 AM

Oh I realy don't know. I looked on e-bay there is one for 167.00. Is $90 plus shipping a fair price? I'll get a pic. I've not looked it over yet to see exacltly what it is.

mkmiller1 · 02-05-2003, 10:03 PM

rossboss-I looked at the pto today, it has the output on the back. Sorry, for some reason I was thinking it was on the front.
Matthew

rossboss · 02-05-2003, 10:19 PM

Thanks for looking

1976K5CHALET · 02-06-2003, 01:52 AM

SM420's are gettin hard to come by....there is a bellhousing...case...shifter sittin in the scrap metal bin at the shop....any use for it?

BTW....Phx Az.....place is called PTO Sales...they might be able to help...

Doug W.

BLAZERMAN · 02-07-2003, 12:28 AM

ozarkhippie, I sent you a PM

02-02-2003, 09:03 PM	#1
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	can't seem to find one looking for a pto to operate a pto winch, SM420 4 speed transmision. someone must of made one. Even a part # and manufacturer would help.

02-02-2003, 10:37 PM	#2
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	The best to look for is a Chelsea, you might try ebay I see them on there often. Last edited by BLAZERMAN; 02-04-2003 at 11:24 PM.

02-03-2003, 09:07 PM	#3
cleatussnow Registered User Join Date: Jun 2002 Location: Pleasanton, CA Posts: 162	When I bought my truck the PTO was gone as was the four speed. but the Knob and the tag was still there, here is what I have I hope it helps... Attached Images __________________ "What we are dealin' with here is a complete lack of respect for the law...." Beuford T. Justice

02-03-2003, 09:07 PM	#4
cleatussnow Registered User Join Date: Jun 2002 Location: Pleasanton, CA Posts: 162	another pic Attached Images __________________ "What we are dealin' with here is a complete lack of respect for the law...." Beuford T. Justice

02-03-2003, 10:34 PM	#5
ozarkhippie Registered User Join Date: Nov 2002 Location: Eureka Springs AR Posts: 494	I just got a 79 1 ton 4x4 with a 4spd , 205 transfercase that has a PTO mounted to the transfercase. Would it work? __________________ Buy Sale or Trade 71 3/4 4x4 72 1/2 ton cheyenne 4x4

02-03-2003, 11:42 PM	#6
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	I don't think that will help, I believe the pto has to come off the transmission, my 66 has a sm420 transmision and a divorced transfer case.

02-04-2003, 07:59 PM	#7
Bob Chayer Registered User Join Date: Dec 2002 Location: Mid, NH Posts: 150	I have a PTO on my '72 K20 that runs off the trans and was used to run a water pump for a well drilling rig. It only turns in one direction. You need one that powers in and out like I had on my Jeep M715. It is impossible to diconect the cable with tension on it. Can be a real problem on an incline or if you are winched up against something. Try the military guys....It's been a while but I think I remember seeing mechanical winches for sale for the later blazers they were running. Same trans SM465 but I'm not sure if it will work on a sm460. Hope this helps and I'll keep an eye out. __________________ Bob Chayer 71 3/4 ton 4X4 Suburban

02-04-2003, 08:02 PM	#8
Bob Chayer Registered User Join Date: Dec 2002 Location: Mid, NH Posts: 150	sorry I ment sm420 __________________ Bob Chayer 71 3/4 ton 4X4 Suburban

02-04-2003, 08:13 PM	#9
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	pto Rossboss- I think I've got what you need. It's mounted to the side of a std(dont know which kind) transmission. It is a Tulsa PTO. I can get a pic of it tomorrow for ya if ya want. Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

02-04-2003, 10:23 PM	#10
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	I would be interested if it's what I'm looking for. The shaft has to point toward the front of the truck and clear the rear motor mount. I can find all kinds that point toward the rear, but they are for opperating dump beds and such.

02-04-2003, 10:37 PM	#11
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Ozarkhippie, how much do you want for your pto? Last edited by BLAZERMAN; 02-04-2003 at 11:21 PM.

02-04-2003, 10:57 PM	#12
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	Blazerman, your last message completely escapes me, am I missing something.

02-04-2003, 11:27 PM	#13
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	I was referring to the post made by Ozarkhippie, I was asking him how much he wants for his pto for an np-205.

02-05-2003, 03:27 AM	#14
ozarkhippie Registered User Join Date: Nov 2002 Location: Eureka Springs AR Posts: 494	Oh I realy don't know. I looked on e-bay there is one for 167.00. Is $90 plus shipping a fair price? I'll get a pic. I've not looked it over yet to see exacltly what it is.

02-05-2003, 10:03 PM	#15
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	rossboss-I looked at the pto today, it has the output on the back. Sorry, for some reason I was thinking it was on the front. Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles



Register or Log In To remove these advertisements.

02-05-2003, 10:19 PM	#16
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	Thanks for looking

02-06-2003, 01:52 AM	#17
1976K5CHALET Senior Member Join Date: Jan 2003 Location: Grand Junction, Colorado Posts: 611	SM420's are gettin hard to come by....there is a bellhousing...case...shifter sittin in the scrap metal bin at the shop....any use for it? BTW....Phx Az.....place is called PTO Sales...they might be able to help... Doug W. __________________ Doug Wright aka K5NUTT over @coloradok5.com Owner of http://groups.yahoo.com/group/ChevyK5BlazerChalets Certified K5 Nut

02-07-2003, 12:28 AM	#18
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	ozarkhippie, I sent you a PM

Register or Log In To remove these advertisements.