Is There a Non Sincro 1st gear 3 Spd in a 67/68

[NewBayColony]

Does anyone have/had a 67 or a 68 3 speed with a non syncro first gear. I thought they were all syncro after 66 but I have read in trucks the base trans up to 68 was a CS10 Syncromesh 3 speed and the next option up the list was a CE10 FULLY SYNCRONIZED. GM's description and wording. In the 69 option list, the only 3 speed is the fully syncronized one. I am looking for the linkage from the column to the transmission for the NON syncro transmission in another thread and I need to know if they even made them. Thanks.

[Jcab256]

Yes, my Dad had a 68 c10 like that when I was growing up, that I believe was original

[Husker]

My 68 3 speed is non synchronized.
Ron

[weim55]

I don't claim to be an expert on the subject but this is what I've experienced in 30+ years of hands on with these trucks. Never seen a 4 bolt side cover non synchro 1st column shift 3speed in any C series '66 and up, 6 or V8. I looked over at the GM heritage site for transmission lineup for '67. Shows what you found: base 6 cylinder 3 speed C10 uses a different ' synchromesh ' then all of the other C 10-30 series. The description of the three speeds available is very vague. They show a single picture to represent all of the three speeds available and it happens to be the older 4 bolt Muncie pictured (?!) Makes no sense at all (?)

I own a very typical almost zero option '67 C10 with the base 250 6cylinder and three speed on the column. My truck has the Warner (NOT a Saginaw NOT a 4 bolt Muncie) three speed column shift that I believe has an 8 bolt side cover and does not have a synchronized first gear. Everything about this truck looks completely original and unmolested. I'll try to get some pictures of this if I'm at the house this weekend.

Steve weim55 Colorado

[zicc1835]

No synchros in the 67 3 speed I have sitting in the shed for years

[NewBayColony]

Originally Posted by Husker

My 68 3 speed is non synchronized.
Ron

Thanks for the come back Husker. Any way of getting a picture of your side cover on the transmission or at least seeing if it's got 4 bolts? Thanks.

[NewBayColony]

Originally Posted by weim55

I don't claim to be an expert on the subject but this is what I've experienced in 30+ years of hands on with these trucks. Never seen a 4 bolt side cover non synchro 1st column shift 3speed in any C series '66 and up, 6 or V8. I looked over at the GM heritage site for transmission lineup for '67. Shows what you found: base 6 cylinder 3 speed C10 uses a different ' synchromesh ' then all of the other C 10-30 series. The description of the three speeds available is very vague. They show a single picture to represent all of the three speeds available and it happens to be the older 4 bolt Muncie pictured (?!) Makes no sense at all (?)

I own a very typical almost zero option '67 C10 with the base 250 6cylinder and three speed on the column. My truck has the Warner (NOT a Saginaw NOT a 4 bolt Muncie) three speed column shift that I believe has an 8 bolt side cover and does not have a synchronized first gear. Everything about this truck looks completely original and unmolested. I'll try to get some pictures of this if I'm at the house this weekend.

Steve weim55 Colorado

Thanks Steve.

[NewBayColony]

Originally Posted by zicc1835

No synchros in the 67 3 speed I have sitting in the shed for years

Thanks for the come back,too. Again, can you look and see if the side cover has 4 bolts? I want to make sure I'm looking for something that exists .

[Husker]

Sure when I get home if I don't forget.
Ron

[jabborabbo]

My ‘67 L6 GMC SPID shows SM318 for the tranny...1st gear is not synchronized....

[factorystock]

Originally Posted by NewBayColony

I thought they were all syncro after 66 but I have read in trucks the base trans up to 68 was a CS10 Syncromesh 3 speed and the next option up the list was a CE10 FULLY SYNCRONIZED. GM's description and wording.

IMO, the old non synchro should have been put out to pasture immediately after the new full synchro came out. GM kept the old non synchro on base 6 cylinder pickups through '68, used the newer full synchro on optional engines during '66, '67 and '68. Finally in '69, all engines used the full synchro.

[NewBayColony]

Originally Posted by jabborabbo

My ‘67 L6 GMC SPID shows SM318 for the tranny...1st gear is not synchronized....

That should be the 4 bolt side cover. It's always referred to as an M18 or with an overdrive, M19. Thanks!!

[NewBayColony]

Originally Posted by factorystock

IMO, the old non synchro should have been put out to pasture immediately after the new full synchro came out. GM kept the old non synchro on base 6 cylinder pickups through '68, used the newer full synchro on optional engines during '66, '67 and '68. Finally in '69, all engines used the full synchro.

I have the synchro 7 bolt in it now with the 4.57 rear end. I bought a M19 overdrive transmission to let me go on the highway and have a little more fun driving it. Now I just have to get the linkage for it.

[67ChevyRedneck]

Originally Posted by NewBayColony

That should be the 4 bolt side cover. It's always referred to as an M18 or with an overdrive, M19. Thanks!!

So that's what my C10 had (the M18). I drove my 67 for the first 4/5 years with the I-6 and 3spd, and man did it suck not having a syncro 1st gear. I guess it taught me to come to a complete stop at stop signs...

[NewBayColony]

Originally Posted by 67ChevyRedneck

So that's what my C10 had (the M18). I drove my 67 for the first 4/5 years with the I-6 and 3spd, and man did it suck not having a syncro 1st gear. I guess it taught me to come to a complete stop at stop signs...

After driving 7/8/9/10/13/18 speed completely nonsynco transmissions for 30 something years, having only one is not a big problem. I miss the rev matching.

[Husker]

Here is mine. I swapped to a 5 speed.
Ron

[NewBayColony]

Originally Posted by Husker

Here is mine. I swapped to a 5 speed.
Ron

I have a friend who did that 5 speed swap. Now you know my next questions, Do you have the linkage for the 3 speed and if so, would you sell it and ship it? Thanks, Jeff

[CSTGURU]

I know that in canada 1967 and 68 trucks had NON-syncro for sure. at least as base equip.

[weim55]

Originally Posted by Husker

Here is mine. I swapped to a 5 speed.
Ron

What year truck is this out of?

Steve weim55 Colorado

[weim55]

This is the original three speed in my '67 250 6 cylinder C10. It is a 9 Bolt Side cover Warner T89. Only second and third gear are synchronized. This transmission was the optional heavy duty three speed for most Chevrolet trucks 1955 through,I believe, 1966. Wondering if Chevrolet may have used these on the base six cylinder C10 in 1967 in 1968 (??). Wondering if GM had a stockpile of these transmissions they needed to use up and just got rid of them on the base trucks for those two model years (??) This particular truck did not come with an SPID for me to cross just in case there is a possibility there was an option for this as a HD 3 speed upgrade as in '55- '66.

Steve weim55 Colorado

[weim55]

Warner T89

[NewBayColony]

Originally Posted by weim55

Warner T89

Thanks for that effort Steve. Another Transmission in the mix. I have seen "Heavy Duty" 3 speeds listed.
You still got real snow. Mine is on it's way out!

[Husker]

Originally Posted by weim55

What year truck is this out of?

Steve weim55 Colorado

it is from a 68.
I will have to round up the shift linkage.
Ron

[NewBayColony]

Originally Posted by Husker

it is from a 68.
I will have to round up the shift linkage.
Ron

I'm sure that is exactly what I'm looking for so it would be greatly appreciated.

[weim55]

Originally Posted by Husker

it is from a 68.
I will have to round up the shift linkage.
Ron

1968 , Wow! Stunned GM still used this early box well past last use in passenger cars. Thanks why I love this site, learn something new all the time......

Steve weim55 Colorado