5.3/4L60E combo - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 06-13-2009, 10:52 PM

This is a 5.3/4L60E from a 2003 GMC truck I was saving for a project that I no longer need. It is in very good condition with a few minor problems resulting from the crash. The engine was started and run before being pulled. It needs a few small items, which I have, to be perfect.

The PS pulley is a little bent. I have a replacement. I will install it if you like. The trans pan is dented. I have a brand new GM replacement ($75) that I will include. The main trans connector is slightly damaged. I have a new tranny harness($125) that I have not had the time to install, but will include with the sale. It will be easy to replace when the pan is off. The last item is the wiring harness that has a few broken wires near the ECM. I was not concerned with it, because I was planning on modifying the harness or replacing it with aftermarket.

All accessories/sensors included. I have the MAF and stock intake tube as well as the stock exhaust pipes(cut off at the cats) with the 02 sensors installed.

$750 or best offer plus shipping.

dieselarmy13 · 06-13-2009, 11:11 PM

Jesus, man, why does this stuff always come up when I'm gettin ready to leave the country for an extented period of time?!!

my67chevytruck · 06-14-2009, 12:47 AM

damn Gringo, you got my mind working now..... TTT for you

Arad68 · 06-14-2009, 01:54 AM

How many miles are on it and could you get an estimate on shipping to 89031?

BADSAM · 06-14-2009, 08:08 AM

sounds like a swinging deal, a tad too far away for me right now.

68 short step · 06-14-2009, 09:31 AM

how many miles? also it looks like its a DBW, do you have the TAC module and pedal?

Gray Ghost · 06-14-2009, 10:32 AM

Smokin' hot deal guys....sure wish I had the scratch for this one but Ihhave to buy another 2.2l four for the S10 tomorrow and about another $1000 in parts.

Arad68 · 06-14-2009, 01:21 PM

I'd like the engine and trans, shipping shouldn't be more than $600. Still a smokin' deal.

gringoloco · 06-14-2009, 01:29 PM

Quote:

Originally Posted by Arad68

How many miles are on it and could you get an estimate on shipping to 89031?

The combo has ~53K on it. The truck it came out of was super-clean. It was definitely someone's baby.

Quote:

Originally Posted by 68 short step

how many miles? also it looks like its a DBW, do you have the TAC module and pedal?

It is DBW. I did not get the TAC and pedal, as I was planning on using a DBC throttle body- which I have. I will include it with the sale.

Quote:

Originally Posted by Arad68

I'd like the engine and trans, shipping shouldn't be more than $600. Still a smokin' deal.

If you want it- it's yours. I will do whatever I can to assist in shipping short of driving it to you myself

Arad68 · 06-14-2009, 01:33 PM

Cool! pm me your address and how you would like to be paid! I will work on a shipping qoute.

Gray Ghost · 06-14-2009, 01:52 PM

Check truck freight based on a skid....I got a quote of $275 to ship to AZ from TX last year.

Arad68 · 06-14-2009, 02:17 PM

Quote:

Originally Posted by Gray Ghost

Check truck freight based on a skid....I got a quote of $275 to ship to AZ from TX last year.

Thanks Gray Ghost. I will do that.

Gringoloco, You have paypal.

68 short step · 06-14-2009, 03:54 PM

soooo, is this sold?

Arad68 · 06-14-2009, 04:43 PM

Yes.

68 short step · 06-14-2009, 04:58 PM

you got a great deal.... need someone to install/wire it up???

06-13-2009, 10:52 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	5.3/4L60E combo This is a 5.3/4L60E from a 2003 GMC truck I was saving for a project that I no longer need. It is in very good condition with a few minor problems resulting from the crash. The engine was started and run before being pulled. It needs a few small items, which I have, to be perfect. The PS pulley is a little bent. I have a replacement. I will install it if you like. The trans pan is dented. I have a brand new GM replacement ($75) that I will include. The main trans connector is slightly damaged. I have a new tranny harness($125) that I have not had the time to install, but will include with the sale. It will be easy to replace when the pan is off. The last item is the wiring harness that has a few broken wires near the ECM. I was not concerned with it, because I was planning on modifying the harness or replacing it with aftermarket. All accessories/sensors included. I have the MAF and stock intake tube as well as the stock exhaust pipes(cut off at the cats) with the 02 sensors installed. $750 or best offer plus shipping. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-13-2009, 11:11 PM	#2
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: 5.3/4L60E combo Jesus, man, why does this stuff always come up when I'm gettin ready to leave the country for an extented period of time?!! __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

06-14-2009, 12:47 AM	#3
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 5.3/4L60E combo damn Gringo, you got my mind working now..... TTT for you __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 06-14-2009 at 12:47 AM.

06-14-2009, 01:54 AM	#4
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: 5.3/4L60E combo How many miles are on it and could you get an estimate on shipping to 89031? __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

06-14-2009, 08:08 AM	#5
BADSAM J'ville Junkman Join Date: Mar 2006 Location: Pomeroy, Ohio Posts: 572	Re: 5.3/4L60E combo sounds like a swinging deal, a tad too far away for me right now. __________________ 72 3/4t Suburban 402BB (Daily driver for 8 years) 68 GTO (never ending proj) 91 Kawasaki ZX-7R 57 Chevy 210 Wagon - 9 Passenger (Wife's project-working on floorpans) 73 Corvette (17 yr old daughter's: Another project - what's wrong with me?) 53 Willys M38

06-14-2009, 09:31 AM	#6
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: 5.3/4L60E combo how many miles? also it looks like its a DBW, do you have the TAC module and pedal?

06-14-2009, 10:32 AM	#7
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 5.3/4L60E combo Smokin' hot deal guys....sure wish I had the scratch for this one but Ihhave to buy another 2.2l four for the S10 tomorrow and about another $1000 in parts. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

06-14-2009, 01:21 PM	#8
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: 5.3/4L60E combo I'd like the engine and trans, shipping shouldn't be more than $600. Still a smokin' deal. __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

06-14-2009, 01:33 PM	#10
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: 5.3/4L60E combo Cool! pm me your address and how you would like to be paid! I will work on a shipping qoute. __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

06-14-2009, 01:52 PM	#11
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 5.3/4L60E combo Check truck freight based on a skid....I got a quote of $275 to ship to AZ from TX last year. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

06-14-2009, 03:54 PM	#13
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: 5.3/4L60E combo soooo, is this sold?

06-14-2009, 04:43 PM	#14
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: 5.3/4L60E combo Yes. __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

06-14-2009, 04:58 PM	#15
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: 5.3/4L60E combo you got a great deal.... need someone to install/wire it up??? Last edited by 68 short step; 06-14-2009 at 04:58 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.