307 Gear Set and Carrier for sale in Dallas, TX Area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 08-29-2003, 11:49 AM

Have a complete set of 307 gears w/carrier, spiders and spacers for sale in the Dallas, TX area for $50.00 plus shipping.

big.l.a · 08-29-2003, 09:54 PM

Do you know anything about putting a possi In?

jmanz69 · 08-29-2003, 11:19 PM

I don't think it's a posi unit. If it were, $50 would be a hell of a deal. As far as putting it in, have it done. There are a lot of things that have to be right. If not, you're going to break something. You need the correct tools and knowledge to get it right. It should only be about $200 to have your rear end set up at a shop.

smonty · 08-30-2003, 05:45 AM

This is not a posi unit. As for installing a posi unit you need to go to a shop and have it done. That is what I would do even though I have changed them out myself. It is too easy to screw up and ruin everything.

smonty · 09-01-2003, 10:03 AM

ttt

08-29-2003, 11:49 AM	#1
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	307 Gear Set and Carrier for sale in Dallas, TX Area Have a complete set of 307 gears w/carrier, spiders and spacers for sale in the Dallas, TX area for $50.00 plus shipping. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

08-29-2003, 09:54 PM	#2
big.l.a Registered User Join Date: Jan 2002 Location: Allen, TX. USA Posts: 210	Do you know anything about putting a possi In? __________________ 71 C10 LWB With Edelbrock 7101& 1406 Carb Accel HEI Blue Print Accel 8.8 Wires Soon to have possi & 186 Camel hump heads Dropped 2-1/2F&4R Dynomax Headers Duals Flowtech Aftburners Tonneau Cover Frm 89 F150 79 Monte C

08-30-2003, 05:45 AM	#4
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply This is not a posi unit. As for installing a posi unit you need to go to a shop and have it done. That is what I would do even though I have changed them out myself. It is too easy to screw up and ruin everything. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

09-01-2003, 10:03 AM	#5
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	ttt ttt __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

08-29-2003, 11:19 PM	#3
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I don't think it's a posi unit. If it were, $50 would be a hell of a deal. As far as putting it in, have it done. There are a lot of things that have to be right. If not, you're going to break something. You need the correct tools and knowledge to get it right. It should only be about $200 to have your rear end set up at a shop.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.