Aftermarket buckets and brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bowtiefreak · 01-31-2005, 12:12 PM

Ok I have a little bit of an issue here. i am trying to put in some aftermarket seats in my truck. The seats only have mounting holes on the bottom of them to mount to the frame that was provided. The frame itself is a one piece contsruction that ties both seats and the console together as a unit. The frame is also angled to provide the typical seven degrees used on seating. My problem is, I don't have any brackets that allow the seats to slide back and forth, up and down etc.. Does anyone have any ideas what I can use. Are ther any aftermarket brackets out there?
I can't ask the place I got the seats and frame from because they no longer make them for our style trucks anymore.
Thanks

01-31-2005, 12:12 PM	#1
Bowtiefreak Registered User Join Date: Jul 2003 Location: LeRoy, Mich. Posts: 854	Aftermarket buckets and brackets Ok I have a little bit of an issue here. i am trying to put in some aftermarket seats in my truck. The seats only have mounting holes on the bottom of them to mount to the frame that was provided. The frame itself is a one piece contsruction that ties both seats and the console together as a unit. The frame is also angled to provide the typical seven degrees used on seating. My problem is, I don't have any brackets that allow the seats to slide back and forth, up and down etc.. Does anyone have any ideas what I can use. Are ther any aftermarket brackets out there? I can't ask the place I got the seats and frame from because they no longer make them for our style trucks anymore. Thanks __________________ 1968 Chevy C10 Short Fleetside/Wood floor ECE 4-6 Drop / 406 Small Block 1971 Chevelle 427 Big Block



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.