Electronic or Mechanical Gauges???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod929 · 04-24-2002, 04:40 PM

I am looking to replace my existing original gauges with Autometer gauges but I dont know what these trucks had as far as mechanical or electronic gauges. Also when i get the gauges will the existing wiring just plug into the new gauges? Thanks

SCOTI · 04-24-2002, 04:50 PM

Stock guage cluster was electronic w/sending units. Electric or mechanical can be used if using aftermarket as both require some fabrication.

Dean23 · 04-24-2002, 07:36 PM

im going to use auto meter phantoms in mine. i'm going to use a mechanical speedo and the other guages sucha s tach, fuel water oil and amp are going to be electric

------------------
Dean
edmonton,canada
68 c10, project in works,350, th350, plain jane.
SLOW AND STEADY GETS THE PANELS READY
http://communities.msn.ca/MyChevytruckpage

04-24-2002, 04:40 PM	#1
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	Electronic or Mechanical Gauges???? I am looking to replace my existing original gauges with Autometer gauges but I dont know what these trucks had as far as mechanical or electronic gauges. Also when i get the gauges will the existing wiring just plug into the new gauges? Thanks __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

04-24-2002, 04:50 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,911	Stock guage cluster was electronic w/sending units. Electric or mechanical can be used if using aftermarket as both require some fabrication. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-24-2002, 07:36 PM	#3
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	im going to use auto meter phantoms in mine. i'm going to use a mechanical speedo and the other guages sucha s tach, fuel water oil and amp are going to be electric ------------------ Dean edmonton,canada 68 c10, project in works,350, th350, plain jane. SLOW AND STEADY GETS THE PANELS READY http://communities.msn.ca/MyChevytruckpage __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.