What did you do to your truck today.The 3rd chapter - Page 40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67C10Step · 12-03-2019, 06:27 PM

Grmpy - you and I should be neighbors. That is exactly how my projects seem to go. Start small and scope creep sets in right off the bat. The end product is always nice but usually more time and money than originally thought.

Andy - where did you get the seals and who is the maker?

Andy4639 · 12-03-2019, 07:22 PM

Quote:

Originally Posted by 67C10Step

Grmpy - you and I should be neighbors. That is exactly how my projects seem to go. Start small and scope creep sets in right off the bat. The end product is always nice but usually more time and money than originally thought.

Andy - where did you get the seals and who is the maker?

I ordered them from GMCPauls website. Per their site.
Manufactured by Precision With Manufacturers Lifetime Warranty

**SoCoC10** · 12-08-2019, 12:21 AM

More progress on the K10
Shorty

**71CHEVYSHORTBED402** · 12-08-2019, 03:01 AM

Told the guy light blue he brings me an

Ochre bed.

JK, the guy does good work. This is the first stage on the bed, though the underside and inside are done. We finished the body dry run, drilled for the tail bezels and lower molding. We'll work on the side moldings next time. Someone stuffed a LH upper tailgate molding in a RH NOS bag. Long story I got three LH, no RH

OregonNed · 12-08-2019, 06:53 AM

Quote:

Originally Posted by SoCoC10

More progress on the K10
Shorty

Love that color! Nice truck sir..

Chris_oz · 12-10-2019, 05:12 PM

I got my Tow Hitch fitted, after seeing one on a truck in this thread on another Longhorn.
Its a Draw-Tie 41938 and fitted up very well.

Now to do some wiring for brakes and lights.

**maverickmk** · 12-10-2019, 07:19 PM

Installed and painted a new (to me) left door.

**SoCoC10** · 12-10-2019, 09:52 PM

More progress on the K10 Shorty

Chevys4life · 12-11-2019, 12:20 PM

Quote:

Originally Posted by SoCoC10

More progress on the K10 Shorty

You did a good tape up job on those emblems. I have a set that I need to do.

Metaldoc · 12-11-2019, 01:10 PM

By using a syringe there's no tapping. Ink refill syringe does the trick quite well.

Chevys4life · 12-11-2019, 01:38 PM

Quote:

Originally Posted by Metaldoc

By using a syringe there's no tapping. Ink refill syringe does the trick quite well.

I need to pick up a few myself. Do you get them from craft stores?

**maverickmk** · 12-11-2019, 01:39 PM

Quote:

Originally Posted by Metaldoc

By using a syringe there's no tapping. Ink refill syringe does the trick quite well.

Wow, I am going to steal that idea

Metaldoc · 12-11-2019, 03:42 PM

Quote:

Originally Posted by Chevys4life

I need to pick up a few myself. Do you get them from craft stores?

I picked up them at Staples, printer ink refill kit

Markus_E · 12-11-2019, 05:37 PM

I spend some time in my new bed wooded my carpenter made for me

Chevys4life · 12-11-2019, 06:11 PM

Quote:

Originally Posted by Markus_E

I spend some time in my new bed wooded my carpenter made for me

Very nice job........wish you were closer, I need some for my truck!!!!

Chevys4life · 12-11-2019, 06:12 PM

Quote:

Originally Posted by Metaldoc

I picked up them at Staples, printer ink refill kit

Thanks Metaldoc.........I will be picking up a printer ink refill kit now.

un4gvn! · 12-12-2019, 05:32 AM

I got the under side of the cab stripped. The tip-n-flip is a life saver. So far, NO rust repair!

67C10Step · 12-12-2019, 06:40 PM

Quote:

So far, NO rust repair!

Subtle brag? Even if it is, I am jealous. Looking good.

Andy4639 · 12-13-2019, 09:20 PM

I got the passenger side vent window done. The sray made a big difference in the assembly.

**70STOVEBOLT** · 12-14-2019, 12:07 AM

Started staying my tailgate linkage with Rustoleum bright galvanizing compound. I will post pics when they are done

Ptjsk · 12-14-2019, 01:50 AM

Installed fenders and grill!

toolboxchev · 12-14-2019, 02:09 AM

Quote:

Originally Posted by un4gvn!

I got the under side of the cab stripped. The tip-n-flip is a life saver. So far, NO rust repair!

Do the rockers, inner and outer. Once you cut into them you will most likely see why. They hold dirt and then the moisture. Always a nightmare in everyone I have owned.

**Richard** · 12-14-2019, 05:34 AM

Not installed yet, but got a present for my K10

un4gvn! · 12-14-2019, 08:44 AM

I took out the black vinyl and replaced it with dark saddle. I think it goes better with the color of the truck. Golden Ginger

**SoCoC10** · 12-21-2019, 01:03 AM

Final buff then it’s time for upholstery.

12-03-2019, 06:27 PM	#976
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,403	Re: What did you do to your truck today.The 3rd chapter Grmpy - you and I should be neighbors. That is exactly how my projects seem to go. Start small and scope creep sets in right off the bat. The end product is always nice but usually more time and money than originally thought. Andy - where did you get the seals and who is the maker? __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

12-08-2019, 12:21 AM	#978
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: What did you do to your truck today.The 3rd chapter More progress on the K10 Shorty Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

12-08-2019, 03:01 AM	#979
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,118	Re: What did you do to your truck today.The 3rd chapter Told the guy light blue he brings me an Ochre bed. JK, the guy does good work. This is the first stage on the bed, though the underside and inside are done. We finished the body dry run, drilled for the tail bezels and lower molding. We'll work on the side moldings next time. Someone stuffed a LH upper tailgate molding in a RH NOS bag. Long story I got three LH, no RH Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s of OEM identifications and part numbers, all written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 12-08-2019 at 03:07 AM.

12-10-2019, 05:12 PM	#981
Chris_oz Registered User Join Date: Sep 2018 Location: Newcastle, New South Wales, Australia Posts: 139	Re: What did you do to your truck today.The 3rd chapter I got my Tow Hitch fitted, after seeing one on a truck in this thread on another Longhorn. Its a Draw-Tie 41938 and fitted up very well. Now to do some wiring for brakes and lights. Attached Images

12-10-2019, 07:19 PM	#982
maverickmk Senior Member Join Date: Nov 2019 Location: Cocoa FL Posts: 596	Re: What did you do to your truck today.The 3rd chapter Installed and painted a new (to me) left door. __________________ Die with memories, not dreams. Not to brag, but I don't need alcohol to make really bad decisions. 1969 GMC Short Step Side

12-10-2019, 09:52 PM	#983
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: What did you do to your truck today.The 3rd chapter More progress on the K10 Shorty Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

12-11-2019, 01:10 PM	#985
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today.The 3rd chapter By using a syringe there's no tapping. Ink refill syringe does the trick quite well. Attached Images __________________ Do it, Do it right, Do it right the first time

12-11-2019, 05:37 PM	#989
Markus_E Registered User Join Date: Jun 2019 Location: Schlaitdorf Germany Posts: 22	Re: What did you do to your truck today.The 3rd chapter I spend some time in my new bed wooded my carpenter made for me

12-12-2019, 05:32 AM	#992
un4gvn! Registered User Join Date: Mar 2006 Location: Latrobe, Pa. 15650 Posts: 341	Re: What did you do to your truck today.The 3rd chapter I got the under side of the cab stripped. The tip-n-flip is a life saver. So far, NO rust repair! Attached Images

12-13-2019, 09:20 PM	#994
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What did you do to your truck today.The 3rd chapter I got the passenger side vent window done. The sray made a big difference in the assembly. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-14-2019, 12:07 AM	#995
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: What did you do to your truck today.The 3rd chapter Started staying my tailgate linkage with Rustoleum bright galvanizing compound. I will post pics when they are done __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

12-14-2019, 01:50 AM	#996
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: What did you do to your truck today.The 3rd chapter Installed fenders and grill! Attached Images

12-14-2019, 05:34 AM	#998
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,692	Re: What did you do to your truck today.The 3rd chapter Not installed yet, but got a present for my K10 Attached Images __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

12-14-2019, 08:44 AM	#999
un4gvn! Registered User Join Date: Mar 2006 Location: Latrobe, Pa. 15650 Posts: 341	Re: What did you do to your truck today.The 3rd chapter I took out the black vinyl and replaced it with dark saddle. I think it goes better with the color of the truck. Golden Ginger Attached Images

12-21-2019, 01:03 AM	#1000
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: What did you do to your truck today.The 3rd chapter Final buff then it’s time for upholstery. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.