The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-13-2013, 11:30 PM   #1
toothenator
Registered User
 
toothenator's Avatar
 
Join Date: May 2013
Location: Houston, TX
Posts: 31
Rear control arms

I'm starting to turn my 88 c1500 into a performance street truck and the first step is building a solid rear end. I plan on using the stock 8.5" 10 bolt but I plan on converting the suspension to a coil over set up and mounting some upper and lower control arms to the differential/axel housing. Since the rear end was not originally equipped I'm having a tough time finding them designed for the truck. Any suggestions other than just custom fabbing some adjustable ones in??
toothenator is offline   Reply With Quote
Old 05-14-2013, 12:23 AM   #2
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: Rear control arms

Here are a few links to 4 link set ups.
I would think any could be done with coil overs.
http://store.gaugemagazine.com/88-98...on4link-1.aspx
http://www.ebay.com/itm/88-98-Chevy-...-/350572088113
http://www.ebay.com/bhp/4-link-chevy-truck
Kim
__________________
My build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=283107
Kim57 is offline   Reply With Quote
Old 05-14-2013, 12:46 AM   #3
toothenator
Registered User
 
toothenator's Avatar
 
Join Date: May 2013
Location: Houston, TX
Posts: 31
Re: Rear control arms

Thanks. using 4-link instead of control arms or trailing arms completely altered my search results.

Anyone here have a preference on axle brands for an 8.5"10 bolt to hold about 450 hp??
toothenator is offline   Reply With Quote
Old 05-14-2013, 07:39 AM   #4
OrangeAnimal
Registered User
 
OrangeAnimal's Avatar
 
Join Date: Jan 2009
Location: New Orleans, LA
Posts: 702
Re: Rear control arms

Moser.
__________________
82 Chevy SWB "OrangeAnimal" Lot of Goodies! Sold
93 GMC 1500 "Angry Red" 383 TBI Powered Fun! 300hp/410ft.lbs.
09 Yaris wife's daily.
OrangeAnimal is offline   Reply With Quote
Old 05-14-2013, 09:44 AM   #5
toothenator
Registered User
 
toothenator's Avatar
 
Join Date: May 2013
Location: Houston, TX
Posts: 31
Re: Rear control arms

Any specific axles you have used and how much horse power do you have behind them?
toothenator is offline   Reply With Quote
Old 05-14-2013, 05:31 PM   #6
OrangeAnimal
Registered User
 
OrangeAnimal's Avatar
 
Join Date: Jan 2009
Location: New Orleans, LA
Posts: 702
Re: Rear control arms

The moser axles were in a El Camino with a 400sbc 10 bolt rear end. I have no idea how much power the car made. If I had to guess I would put it conservatively at 425hp and close to 500tq.

I also had Superior Axles in a Mustang with a 8.8 rear end. Engine made 415hp/455tq. So they saw use everyday.

PS I would make sure you do a very detailed build of the 10 bolt. Also get a cover with bearing supports in it. It can break the caps no prob.
__________________
82 Chevy SWB "OrangeAnimal" Lot of Goodies! Sold
93 GMC 1500 "Angry Red" 383 TBI Powered Fun! 300hp/410ft.lbs.
09 Yaris wife's daily.
OrangeAnimal is offline   Reply With Quote
Old 05-14-2013, 08:26 PM   #7
Kim57
Registered User
 
Kim57's Avatar
 
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
Re: Rear control arms

IMHO if you plan on putting any power to this project I would think about stepping up to 12 bolt or 9" with 31 spline axles. They should still be in abundance in the bone yards.
Kim
__________________
My build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=283107
Kim57 is offline   Reply With Quote
Old 05-15-2013, 02:17 PM   #8
toothenator
Registered User
 
toothenator's Avatar
 
Join Date: May 2013
Location: Houston, TX
Posts: 31
Re: Rear control arms

I am considering changing the whole rear end but I keep reading that the 8.5" 10 bolt rear end can handle platforms with < 500 hp no problem
__________________
88 C1500 MODERN CLASSIC
96 HARLEY FATBOY OLD SKOOL
toothenator is offline   Reply With Quote
Reply

Bookmarks

Tags
differential, performance

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com