Shoulder Belt Mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

54blackhornet · 01-10-2012, 02:24 PM

In a 68 with the factory drilled shoulder mount location, what is needed to be done to mount a shoulder belt ? Will 73-87 3pt belts work ? found a set and truck was never in accident to damage belts....thanks for input guys

**leddzepp** · 01-10-2012, 03:18 PM

You need a 7/16" 20 (fine thread) bolt for the pillar mount. A lot of guys use S-10 belts, so I think 73-87 belts would work too. Others will chime in.

54blackhornet · 01-10-2012, 04:36 PM

Thanks for the tip ! does the panel have support behind it from the factory to accept the 3pt attatchment or do you have to beef it up with a steel plate?

**leddzepp** · 01-10-2012, 04:42 PM

There is support behind it from the factory, as shoulder belts were an option in these trucks.

01-10-2012, 02:24 PM	#1
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,273	Shoulder Belt Mount In a 68 with the factory drilled shoulder mount location, what is needed to be done to mount a shoulder belt ? Will 73-87 3pt belts work ? found a set and truck was never in accident to damage belts....thanks for input guys

01-10-2012, 03:18 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: Shoulder Belt Mount You need a 7/16" 20 (fine thread) bolt for the pillar mount. A lot of guys use S-10 belts, so I think 73-87 belts would work too. Others will chime in. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-10-2012, 04:36 PM	#3
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,273	Re: Shoulder Belt Mount Thanks for the tip ! does the panel have support behind it from the factory to accept the 3pt attatchment or do you have to beef it up with a steel plate?

01-10-2012, 04:42 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: Shoulder Belt Mount There is support behind it from the factory, as shoulder belts were an option in these trucks. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.