01-10-2024, 02:12 PM
|
#4
|
|
Conversion Truck Addicted
Join Date: Sep 2009
Location: Denmark, Europe
Posts: 1,548
|
Re: Steering Shaft upgrade XJ or Astro Van?
Quote:
Originally Posted by SCOTI
From what I understand in the g-body/Malibu world the Astro shafts require re-clocking one end to have the necessary alignment (the g-body & C10 stuff is similar).
The re-clocking requires cutting & re-welding of one end which is not required for the XJ swap.
|
Thanks, I got a shaft from a astro on the way, just and sleve it is not a problem so i will se if it can be made to work
__________________
Thomas
Quote:
|
Tonight mine pulled a few cars out of snowbanks, and is sitting in my driveway, icicles on the grille, wheels just white cakes of snow, buried up to the lug nuts in powder, straps and chains wrapped around the bumpers, the outline of the wipers clear in 4 inches of snow on the windshield... A tired warrior of the 1980s in a world of low profile tires, front wheel drive, and plastic bumpers, where people stay in their houses until snowplows move the offending substance from their paths, too helpless to travel without AAA and chains and salt, clearing their windows with longhandled brushes while gently stepping around in the snow trying to stay nice and dry.
|
|
|
|
Threaded Mode