86 front end for the 67 Ramp - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 05-20-2020, 05:26 PM

The guy doing the swap is half way there. He has the old front end out. The dang rain here is not helping though. It's been raining for over a week now and no sign of letting up. I'm so sick of this wet stuff!

**Getter-Done** · 05-20-2020, 05:58 PM

Looking good.
Going to do that swap myself.
When I get to that point.
Subbed for the good info you always add

.

**Ol Blue K20** · 05-20-2020, 06:00 PM

That's gonna be cool. It's been raining in Cali too. Our rain is sporadic and light though.

Andy4639 · 05-20-2020, 08:08 PM

The rain here is heavy and everything is full. I had to use the other lanes twice today because of flooding. Glad police where out helping with traffic.
I got the mail today and had several new parts.

I ordered the adjustable propoining valve for it. I also putting a later model master cylinder in it.

**mkmc69** · 05-21-2020, 11:29 AM

Hope those aren't Harbor Freight jack stands holding that up!! Some of those have been recalled. Might want to check that out!!

Andy4639 · 05-21-2020, 05:29 PM

Quote:

Originally Posted by mkmc69

Hope those aren't Harbor Freight jack stands holding that up!! Some of those have been recalled. Might want to check that out!!

I'll ask but don't think they are.
Randy says he hopes to have it done by end of next week if the weather will cooperate.

Andy4639 · 05-26-2020, 12:51 PM

Went by and dropped off the brake line tubing to Randy for the brakes. He surprised me with the front end sitting under it. He had the holes lined up ready to drill. Going to order new sway bar bushing for it and have new rubber hoses alsol
Only thing we don't know yet is the steering link off the power steering gonna work are not.

RichardJ · 05-26-2020, 02:38 PM

You do know that MC pictured in your post #4 is a quick take-up master intended to be used with low drag calipers.

Andy4639 · 05-26-2020, 02:59 PM

Quote:

Originally Posted by RichardJ

You do know that MC pictured in your post #4 is a quick take-up master intended to be used with low drag calipers.

So what are you saying?

Andy4639 · 05-31-2020, 08:56 PM

Hoping he makes some progress on the ramp truck tomorrow. It's suppose to be nice the next few days so I hope he gets on it and finish it!

Andy4639 · 06-01-2020, 04:47 PM

Just got back from the shop. Front end is in. Went and got new rubber lines for the calipers. He said he should have it moving around by Friday. Also got new bushing for the sway bar.
I also swapped the master cylinder for a 71 C-20 one.

**Ol Blue K20** · 06-01-2020, 07:55 PM

Sounds like it's coming together....

Andy4639 · 06-01-2020, 08:16 PM

Quote:

Originally Posted by Ol Blue K20

Sounds like it's coming together....

Yes sir. He even said it looked like the pitman arm was gonna work with the 86 center link to. That's good news. I'm hoping he has it back far enough to see it moving on it's own power by Friday!

**Ol Blue K20** · 06-01-2020, 10:26 PM

Quote:

Originally Posted by Andy4639

Yes sir. He even said it looked like the pitman arm was gonna work with the 86 center link to. That's good news. I'm hoping he has it back far enough to see it moving on it's own power by Friday!

Awesome! I hope it works out.

05-20-2020, 05:26 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	86 front end for the 67 Ramp The guy doing the swap is half way there. He has the old front end out. The dang rain here is not helping though. It's been raining for over a week now and no sign of letting up. I'm so sick of this wet stuff! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

05-20-2020, 05:58 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,724	Re: 86 front end for the 67 Ramp Looking good. Going to do that swap myself. When I get to that point. Subbed for the good info you always add . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

05-20-2020, 06:00 PM	#3
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 86 front end for the 67 Ramp That's gonna be cool. It's been raining in Cali too. Our rain is sporadic and light though. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

05-21-2020, 11:29 AM	#5
mkmc69 Senior Member Join Date: Jan 2009 Location: Logansport,In Posts: 544	Re: 86 front end for the 67 Ramp Hope those aren't Harbor Freight jack stands holding that up!! Some of those have been recalled. Might want to check that out!!

05-26-2020, 12:51 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 86 front end for the 67 Ramp Went by and dropped off the brake line tubing to Randy for the brakes. He surprised me with the front end sitting under it. He had the holes lined up ready to drill. Going to order new sway bar bushing for it and have new rubber hoses alsol Only thing we don't know yet is the steering link off the power steering gonna work are not. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

05-20-2020, 08:08 PM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 86 front end for the 67 Ramp The rain here is heavy and everything is full. I had to use the other lanes twice today because of flooding. Glad police where out helping with traffic. I got the mail today and had several new parts. I ordered the adjustable propoining valve for it. I also putting a later model master cylinder in it. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 05-20-2020 at 08:27 PM.

05-26-2020, 02:38 PM	#8
RichardJ Registered User Join Date: Apr 2010 Location: So Cal Posts: 1,413	Re: 86 front end for the 67 Ramp You do know that MC pictured in your post #4 is a quick take-up master intended to be used with low drag calipers. __________________ '67 GMC 2500, 292, 4spd, AC

05-31-2020, 08:56 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 86 front end for the 67 Ramp Hoping he makes some progress on the ramp truck tomorrow. It's suppose to be nice the next few days so I hope he gets on it and finish it! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

06-01-2020, 04:47 PM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 86 front end for the 67 Ramp Just got back from the shop. Front end is in. Went and got new rubber lines for the calipers. He said he should have it moving around by Friday. Also got new bushing for the sway bar. I also swapped the master cylinder for a 71 C-20 one. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 06-01-2020 at 07:52 PM.

06-01-2020, 07:55 PM	#12
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 86 front end for the 67 Ramp Sounds like it's coming together.... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.