1964 GMC 1 Ton Dually build

[TJ's Chevy]

Originally Posted by roll_the_dice

OK question for everyone...I am missing the 2 bolts that hold the front bracket on to the PS pump. Anyone know the size and length?

I was going to remove the pulley and see what fit, but easier said than done. The front has a nut on the shaft and I can't figure out how to hold the pulley so it doesn't spin...any words of wisdom to remove this old pulley?

I've gone as far as taking stuff into the hardware store and finding something that worked haha!

If you can get the pulley in a vice and impact the nut loose that'd work. Or if you are nuts like me hold it and try that.

I'll try and get some pictures of that rear bracket for you tomorrow.

[roll_the_dice]

Originally Posted by TJ's Chevy

I've gone as far as taking stuff into the hardware store and finding something that worked haha!

If you can get the pulley in a vice and impact the nut loose that'd work. Or if you are nuts like me hold it and try that.

I'll try and get some pictures of that rear bracket for you tomorrow.

Thanks TJ...I thought about putting it in my vice...so far my holding it won't work. haha I'll get it...just have to be smarter than the part!