PA 72 blazer part out

[1rippen6]

Originally Posted by tim71

Still want the AC brace that bolts to intake manifold that supports the rear of compressor....
but more important , does this Blazer have the 2 rear axle plates that sit under axle and secure the axle to the leaf springs? The axle u bolts face down and go thru this plate. I need 2 one for each side of axle. I think 1/2 ton K trucks use the same setup. I put a photo of plate on a WTB posting. I would buy the rear u bolts also, if they are usable.

Thanks, Tim

Here is what I found, A/C bracket looks likes it's for a 70 V8, 35 plus shipping

Axle plates 20 ea. plus shipping, I found 3