The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-01-2015, 05:45 AM   #101
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

So like I posted up above the DJM control arms didn't work out. So I ordered up the CPP upper and lower arms. Now these babies are nice. And I didn't have any issues as I have seen some other members post about. They are really nice upgrade. I would post a pic but until I figure out how to stop having my pics flipped around from my phone. And I had to order another lowering kit for it cause I sold the one that was on the truck. This time I bought a complete Belltech kit but purchased the 2" drop coils they have to keep the same amount of drop spindles coils flip and street performance shocks. I got to figure out or to get my pics to show up correctly.
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 11:48 AM   #102
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

CPP control arms and CPP sway bar
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 11:52 AM   #103
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Other side lol.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 01:05 PM   #104
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: 1976 Square "Simple Green"

Nice!
Low Elco is offline   Reply With Quote
Old 07-01-2015, 01:31 PM   #105
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Old motor and old headers I put on. This old motor is the reason for the 3rd lowering kit I have now sitting in the garage that I'm putting on. I will get into that soon. At this time I didn't have the inner fenders in but I do now.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 01:32 PM   #106
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Quote:
Originally Posted by Low Elco View Post
Nice!
Thanks man I really like them. They look good plus are a suspension enhancement.
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 02:03 PM   #107
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Little LED headlight upgrade. I can see now lol. I should have done this with my other squares I owned in the past. I will put these up against any HID headlights. Plus they are a plug and play. No running wires or running relays. I forgot also the clear running/turn signals upfront.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 02:05 PM   #108
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Clear side markers also
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 06:35 PM   #109
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

The 12 bolt case was still good to go but the internals had to go. Nothing was wrong with them but doing a one wheel burnout is not cool lol. Truck originally had a open diff 3.08. Not anymore I put a Detroit Tru Track limit slip in it with a motive 3.73 gear.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 06:36 PM   #110
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

3.73. No noise. Really nice setup.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 08:41 PM   #111
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Now about the old motor. Well I got the truck to drive show it off and run around with the fam. My lil boy loves the truck but wants it to be red lol. That won't happen. So when I got the truck it had 95k on it. I drove it changed the oil every 500 miles cause under the valve covers didn't look that great some oil sludge buildup. Well one day at linch I dove it out to get a burger and while sitting in line I heard the motor go knock knock. Trust me I didn't want to answer. So at the 105,578 mark the motor let go. It was a sad day that day but everything happens for a reason. And to be honest this sounds bad I am sure glad it did. Cause that motivated me to get a motor with over 550hp. 565 to be exact on the Dyno. My new race motor hahaha. Is balanced and blueprinted 385 stroker. I wanted to be diff so I didn't get a 383 like most. So with all the lighter parts of the motor it raised the front end up a .5" so that is why I got another lowering kit. Got the CPP new style drop spindles 2.5" and the CPP 3" lowering coils CPP flip kit. And front and rear Doetsch Schocks. So now I have a Belltech losing kit going to be taking space in the garage.
Here is my new motor I will post up a few pics.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 08:42 PM   #112
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

AFR 210 heads!! Motor is forged top to bottom. I did not spare anything on this motor. And that lower rad hose now is SS braid I didnt have it on in this pic.
Attached Images
 

Last edited by RodsGreen10; 07-01-2015 at 09:00 PM.
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 08:43 PM   #113
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Headman long tubes 1 3/4. I changed the valve covers to the fancy ones profound makes.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 08:46 PM   #114
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

I think it looks great in the truck. Draws people in at the shows.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 08:48 PM   #115
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Polished out 3 core champion rad with dual fans. Used the painless kit for this that is dual activated. Easy to wire up.
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 08:50 PM   #116
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Running a 3" x pipe from collectors back with 3" Borla muffler. It sounds damn good!!!
Attached Images
 
RodsGreen10 is offline   Reply With Quote
Old 07-01-2015, 08:53 PM   #117
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Here is the Dyno video of motor they did several pulls and the max hp was 565 with 535 trq. I got the Dyno sheets in the folder. I don't know if this will work cause I'm not doing that good of a job posting pics. Now in the video you will notice timing cover and oil pan a different color. Well I told them everything to be chrome or polished they must have forgot. But they took care of it for me.

https://m.youtube.com/watch?v=ZZcNkw...ature=youtu.be
RodsGreen10 is offline   Reply With Quote
Old 07-02-2015, 01:09 PM   #118
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: 1976 Square "Simple Green"

HOT DAMN! Congrats! Bet you're workin' that new posi now!
Low Elco is offline   Reply With Quote
Old 07-02-2015, 01:30 PM   #119
96twodoor
Registered User
 
96twodoor's Avatar
 
Join Date: Mar 2011
Location: Bossier City Louisiana
Posts: 312
Re: 1976 Square "Simple Green"

this thing is awesome, going to keep tabs on this build
96twodoor is offline   Reply With Quote
Old 07-02-2015, 09:31 PM   #120
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Quote:
Originally Posted by Low Elco View Post
HOT DAMN! Congrats! Bet you're workin' that new posi now!
Lol! You know it man. Runs great especially with my 3000-3500 stall convertor and new tranny. Truck stay right at the power band. Hot and go and so do the tires lol. And these Yoko 22" tires are not cheap.
RodsGreen10 is offline   Reply With Quote
Old 07-02-2015, 09:41 PM   #121
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Well got the CPP front lowering kit done today. Took the Belltech off didn't even have them on long enough to get any rust on the spindles or coils lol. Now the Belltech will be collecting dust in the garage. Man it is sitting pretty with the new drop. I painted the CPP spindles with VHT caliper black paint for protection. And the coils well they are black powder so no need to touch them. And I figured out why I was never good at math cause by CPP 2.5 drop spindles and 3" drop coils equals 6" drop lol. Plus replaced the old splash shields with CPP ones. I will get pics tomorrow I had to hurry and get everything installed and torqued to spec and get to a cookout. I should have taken pics before I installed it but I could not wait to get it on. It's been sitting in my garage for a week begging me to install it. But I will still get a few pics and post.
RodsGreen10 is offline   Reply With Quote
Old 07-03-2015, 02:51 AM   #122
slimneverdies
Registered User
 
slimneverdies's Avatar
 
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
Re: 1976 Square "Simple Green"

Where you get those 7" led's from???
__________________
Long live SLIM
------------------
At least try to buy American
slimneverdies is offline   Reply With Quote
Old 07-03-2015, 07:50 AM   #123
TrailerTrash
Registered User
 
TrailerTrash's Avatar
 
Join Date: Jun 2015
Location: PA
Posts: 441
Re: 1976 Square "Simple Green"

engine sounds nasty dude
TrailerTrash is offline   Reply With Quote
Old 07-03-2015, 12:21 PM   #124
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Quote:
Originally Posted by TrailerTrash View Post
engine sounds nasty dude
Thanks. Sounds even better now with the 3" exhaust x pipe and the Borlas on it! Had a guy in a New Shelby GT 500 pull up next to me at the light one day. He said man idk what you have in that truck but it sounds damn good and it sure is beating the pavement up lol.

Last edited by RodsGreen10; 07-03-2015 at 12:30 PM.
RodsGreen10 is offline   Reply With Quote
Old 07-03-2015, 12:29 PM   #125
RodsGreen10
Registered User
 
RodsGreen10's Avatar
 
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
Re: 1976 Square "Simple Green"

Quote:
Originally Posted by slimneverdies View Post
Where you get those 7" led's from???
A few companies make them but only 2 companies make them with the projectors. The projectors gives you better focal point and better light cut off. JW Speaker makes them and Oracle Lighting makes them. Well I am not spending $800 for JW Speaker lights. So I got the Oracle Lighting lights at half price. Only difference is one is made here and the other is made in China and one is DOT approved and the other is off road. I got them on sale for $365. Now you can get on Amazon and type in 7 inch LED headlights and Phillips, GE, Truck Litt all will show up and you can get them for cheaper but they will not have the projectors. And people report with out the projectors you will get a x pattern on the road. But they still are leaps and bounds over the old holagen lights.
RodsGreen10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com