The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-03-2016, 12:07 PM   #1
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Fiftee3's suspension & bagging project

Greetings all!

First off, I am so happy to find this forum. I joined instantly. There is a lot of information here and more in the way of what I am looking for, mainly bagged trucks!

This will be my first post, so I thought I would just dive right in and start a build, or suspension build thread.

About me: Name is Phil, 55 years young, married, live in Somerset County NJ, enjoy hot rodding and always have. I try to do everything myself and not as talented as some/most of you out there Also own a 56 210 Chevy with a ZZ454 BB.

About my truck: It’s a 53 3100 ½ ton. I bought it about 5 years ago and had it shipped here to NJ from Missouri. It came primer gray, kinda beat up, with a 216, 3-speed on column. I got it running and drove it for about a year. Driver’s side block was cracked (common), so I upgraded to a 235. I changed to a T5 trans, front disc brakes, new kingpins, rebuilt rear brakes, made my own wood plank bed, new master cylinder upgrade with bracket, and swapped the bench for a set of Silverado seats with the chest seat belts built in. On the 235, I added Williams headers, Summit Racing HEI distributor, MSD wires, Offy dual manifold, dual weber carbs, and dual exhaust out the back. I painted it myself (first time) flat black. Overall, I have been very pleased. Truck drives good and steers pretty well with minimal bump steer. I should probably leave it, however, as you all know, I need to press on!

So, I have ordered and received a complete bagged MII front end kit from JW Rod Garage (real nice people here), rear parallel 4 link from Paul Horton Welder Series (another super nice vendor), step notch from Paul also and will soon be ordering a Ford 9” with 350’s. My goal is to get close to the running boards, and, still retain the straight 6. From my measurements, I think I am going to have to fab the oil pan. I have read here that when using the JW kit members here have notched the front frame 1 ¾. If I do that, I’ll have issues. If I don’t notch it looks like it will make it, but I don’t know how low I’ll get it. “some help here if anyone can assist”. I also just purchased a new Miller 211 so I am ready to go. I am in no hurry so my posts here may be slow sometimes. I will photo as much as I can as I know it is always beneficial to others.

In closing, again, happy to be here. I am always enjoying the crazy talent that some of you possess and wish you were my neighbors!!! Below are a few pics of how it looks now…
Phil

Name:  20150628_161714-1-1.jpg
Views: 1732
Size:  46.5 KB


Name:  20140623_184530.jpg
Views: 1708
Size:  53.0 KB


Name:  20140623_184604.jpg
Views: 1714
Size:  59.4 KB
Fiftee3 is offline   Reply With Quote
Old 02-03-2016, 01:24 PM   #2
iowaboynca
Registered User
 
iowaboynca's Avatar
 
Join Date: Aug 2012
Location: West Side of the valley, CA
Posts: 878
Re: Fiftee3's suspension & bagging project

Welcome. that's a nice truck you've got there.
__________________
Build: "1950" GMC -Charlotte
iowaboynca is offline   Reply With Quote
Old 02-03-2016, 01:50 PM   #3
Coach529
Registered User
 
Coach529's Avatar
 
Join Date: Nov 2012
Location: Post Falls, Idaho
Posts: 1,757
Re: Fiftee3's suspension & bagging project

Looks like a GREAT start. I will tag along and watch!!
__________________
1949 Chevy 3600

"Adventures of Henry"

http://smu.gs/QOlhWY
Coach529 is offline   Reply With Quote
Old 02-03-2016, 04:31 PM   #4
jweb
Registered User
 
jweb's Avatar
 
Join Date: Apr 2010
Location: Oregon
Posts: 1,168
Re: Fiftee3's suspension & bagging project

I have a JW rod garage front end with shocks & springs. The crossmember welds to the bottom of the frame and the spring hats to the side, so it doesn't give as much ground clearance as some other kits.

Yours may be different.
jweb is offline   Reply With Quote
Old 02-03-2016, 04:48 PM   #5
pugs
Registered User
 
pugs's Avatar
 
Join Date: Mar 2003
Location: Hamburg Pa
Posts: 1,153
Re: Fiftee3's suspension & bagging project

good looking truck ya got there
__________________
I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...
pugs is offline   Reply With Quote
Old 02-03-2016, 09:14 PM   #6
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: Fiftee3's suspension & bagging project

Nice truck!!! Your story and plans sound bang on.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 02-03-2016, 09:25 PM   #7
52MNResto
Registered User
 
52MNResto's Avatar
 
Join Date: Feb 2015
Location: MN
Posts: 9
Re: Fiftee3's suspension & bagging project

I also have a JW Rod Mustang II bag kit, with power rack. I have not notched mine. I compensated with 2" drop spindles. I called and bother those guys a lot... didn't find center line before I took out the old straight axle. rookie mistake. but live and learn. My advice is test fit and tack oh and measure until your tape is broken before you burn it in. Good luck!
52MNResto is offline   Reply With Quote
Old 02-04-2016, 03:11 AM   #8
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,014
Re: Fiftee3's suspension & bagging project

Welcome! Sounds fun, I will tag along.
Advanced Design is offline   Reply With Quote
Old 02-04-2016, 08:21 AM   #9
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,549
Re: Fiftee3's suspension & bagging project

Welcome to the group, nice ride...Jim
oldman3 is offline   Reply With Quote
Old 02-04-2016, 09:41 AM   #10
rtinniste
Registered User
 
Join Date: Nov 2015
Location: los angeles
Posts: 111
Re: Fiftee3's suspension & bagging project

Nice choice on the 211 I just bought mine a couple weeks ago.
rtinniste is offline   Reply With Quote
Old 02-06-2016, 07:11 PM   #11
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

Hello all, Its Saturday 2/6/16,

First, thanks for all the kind words.
Today I started taking things apart.
Started with the hood

Name:  IMG_4772.jpg
Views: 1593
Size:  49.9 KB

Then drained and removed the radiator and removed wiring alond drivers fender and pass headlamp.

Name:  IMG_4773.jpg
Views: 1580
Size:  54.5 KB

Then, I decided to remove the entire clip. Turned out to be fairly easy.
7 bolts per side along firewall and the two bolts that hold radiator support to the front cross member. took me about an hour and a half.

Name:  IMG_4776.jpg
Views: 1653
Size:  48.5 KB


Name:  IMG_4777.jpg
Views: 1603
Size:  54.1 KB

Next I will mark centerline and removed old setup. I will level frame on stands and with engine in, see how much clearance I have to new JW Rod Garage cross member. If all is ok, I will remove engine/trans, and start welding.
Project will be moving slowly due to large honey dew list! Till then!

Phil...
Fiftee3 is offline   Reply With Quote
Old 02-06-2016, 09:43 PM   #12
ChuckDriver
A320 Pilot/USAF Retired
 
ChuckDriver's Avatar
 
Join Date: Mar 2009
Location: Charleston, SC
Posts: 2,622
Re: Fiftee3's suspension & bagging project

Cool project, love the 2 tone blue 56!!
ChuckDriver is offline   Reply With Quote
Old 02-07-2016, 06:40 PM   #13
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

Today 2/7/16,
So I removed the old front complete axle, shocks, ground off the upper shock mounts and removed them, and removed the steering box.

Name:  IMG_4778.jpg
Views: 1554
Size:  48.5 KB

Then ground down inner lower frame rails to equal the top rail for test fitment of the JW Rod Garage front cross member.

Passenger side...
Name:  IMG_4781.jpg
Views: 1550
Size:  33.1 KB

Drivers side...
Name:  IMG_4782.jpg
Views: 1554
Size:  33.7 KB

I will have to notch out for the steering rack and weld in a half circle...
Name:  IMG_4784.jpg
Views: 1554
Size:  44.2 KB

Overall, I am happy with the clearance. I have heard some kits hit the oil pan of a 235. I have about 1.5 inches...
Name:  IMG_4780.jpg
Views: 1537
Size:  37.1 KB

That's all for this weekend. Will post more soon...
Phil
Fiftee3 is offline   Reply With Quote
Old 02-07-2016, 07:36 PM   #14
Hampshire
Registered User
 
Hampshire's Avatar
 
Join Date: Oct 2013
Location: Western MA
Posts: 281
Re: Fiftee3's suspension & bagging project

I have the "other" JW Rodgarage IFS on mine. 1-3/4" greater track and only 2"+ down from stock height - though if you like them lower, you can use drop spindles as I used standard (not dropped) spindles & coil overs....

No notching, good clearance to the oil pan & I don't have to cut up my fender inners to clear the shock towers.
Hampshire is offline   Reply With Quote
Old 02-20-2016, 07:06 PM   #15
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

Saturday 20/16

So I have to start of by saying that the talent on this web site is unreal. I actually thought of removing my build as there are so many amazing builds here. The documentation is so good. But, as always, every photo can count and maybe mine will help someone else in the future!

Today I removed the motor and trans. Removed the front/rear spring mounts. Wow! were those rivets hard to knock out. Took a little effort, but I got em! Also cut and ground my boxing plates to fit.

Name:  IMG_4785.jpg
Views: 1460
Size:  55.3 KB

Name:  IMG_4787.jpg
Views: 1472
Size:  52.2 KB

Name:  IMG_4789.jpg
Views: 1460
Size:  44.9 KB

Name:  IMG_4794.jpg
Views: 1453
Size:  50.1 KB
Fiftee3 is offline   Reply With Quote
Old 02-20-2016, 07:10 PM   #16
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

I do have a question. Where is the frame considered level from to back, at the point on my frame where the level is sitting?

Name:  IMG_4793.jpg
Views: 1638
Size:  44.7 KB

because I want to be able to level the cross member front to back as well as side to side...

Name:  IMG_4792.jpg
Views: 1459
Size:  41.0 KB

Name:  IMG_4790.jpg
Views: 1446
Size:  47.6 KB

Last edited by Fiftee3; 02-20-2016 at 07:11 PM. Reason: spelling
Fiftee3 is offline   Reply With Quote
Old 02-20-2016, 09:00 PM   #17
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,014
Re: Fiftee3's suspension & bagging project

Fiftee3, I would say yes.

The JW Rod garage instructions are a bit unclear. Their instructions step one advise to set the frame with the same rake as vehicle will have when completed.

They say...
Support the car/chassis on four sturdy jackstands. Make sure the chassis is level side-to-side, and is at the fore-aft rake you intend to run the car at.

Then a few steps later they say to have frame level side to side and front to rear.

If someone who has installed JW unit steps in with advice I sure defer to them.

Good progress!


Quote:
Originally Posted by Fiftee3 View Post
I do have a question. Where is the frame considered level from to back, at the point on my frame where the level is sitting?

Attachment 1501152
Advanced Design is offline   Reply With Quote
Old 02-20-2016, 11:00 PM   #18
lv2tri2
Registered User
 
Join Date: Feb 2013
Location: Fallbrook California
Posts: 245
Re: Fiftee3's suspension & bagging project

Nice truck! How would rate the performance of your motor, set up as it is? I will surely watch your progress.
lv2tri2 is offline   Reply With Quote
Old 02-21-2016, 07:51 AM   #19
Hilljack51
Registered User
 
Hilljack51's Avatar
 
Join Date: Nov 2013
Location: Bartow, FL
Posts: 56
Re: Fiftee3's suspension & bagging project

I've never installed a JW rod garage crossmember but I just finished installing a MII and I can't imagine the geometry being that much different. I set my frame front to back at a 2 degree rake, measure just in front of the transmission crossmember.
Hilljack51 is offline   Reply With Quote
Old 03-20-2016, 08:25 PM   #20
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

Got everything mocked up this week... Moving along, slow, but sure..
[ATTACH]1512561[/ATTACH
Attached Images
 
Fiftee3 is offline   Reply With Quote
Old 03-20-2016, 08:43 PM   #21
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

welding it all in...
Name:  20160319_142702_resized_1[1].jpg
Views: 1353
Size:  55.0 KB

Name:  20160319_183526-1_resized_1[1].jpg
Views: 1371
Size:  29.1 KB

Name:  20160319_183536-1_resized_1[1].jpg
Views: 1351
Size:  33.0 KB
Fiftee3 is offline   Reply With Quote
Old 03-20-2016, 08:45 PM   #22
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

I had posted about extra support. some said not needed. I fabbed these for extra upward inertia...
Name:  20160320_162954-2_resized_1[1].jpg
Views: 1518
Size:  47.5 KB

Name:  20160320_163047-1_resized_1[1].jpg
Views: 1515
Size:  58.0 KB
Fiftee3 is offline   Reply With Quote
Old 03-21-2016, 09:38 PM   #23
Rude Dude
Registered User
 
Rude Dude's Avatar
 
Join Date: Sep 2005
Location: Glendale Arizona
Posts: 1,188
Re: Fiftee3's suspension & bagging project

I did the same but used two supports, never can be two safe and cheap insurance.

Quote:
Originally Posted by Fiftee3 View Post
I had posted about extra support. some said not needed. I fabbed these for extra upward inertia...
Attachment 1512585

Attachment 1512586
Rude Dude is offline   Reply With Quote
Old 04-03-2016, 07:52 PM   #24
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

04/03/16

Slow going here. Trying to finish our master bathroom. Got a little done today. All welding on IFS is done. Mounted front upper shock towers, did some cleanup and grinding. Welded up a few holes, more grinding. A lot of standing around and staring. I seem to do too much of that. I swear, I could stand out there and just stare at the project for a couple hours! I must be out of my mind...
Anyway, front is done. I will have to weld in mounts for the front brake lines still, just don't know where they'll be yet. All painted with POR15. Have to topcoat. Using POR15 top coat spray. I sprayed the upper and lower control arms with it today. Coats like powder coat and can does not clog. I do wipe clean after every use.

Name:  IMG_4796.jpg
Views: 1259
Size:  41.1 KB

Name:  IMG_4797.jpg
Views: 1266
Size:  41.0 KB

Name:  IMG_4798.jpg
Views: 1298
Size:  50.9 KB

I used a couple of old made in USA wrenches for added support on rear of lower control arm.

Name:  IMG_4799.jpg
Views: 1252
Size:  47.9 KB
Fiftee3 is offline   Reply With Quote
Old 04-03-2016, 07:54 PM   #25
Fiftee3
Registered User
 
Fiftee3's Avatar
 
Join Date: Jan 2016
Location: Somerset County, NJ
Posts: 135
Re: Fiftee3's suspension & bagging project

Oh, and PS/
Coach, love the Henry build. Have been following along. Great posts!
Phil
Fiftee3 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com