The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-09-2019, 10:04 PM   #1
Jennandrand
Registered User
 
Join Date: Oct 2016
Location: Tyler, TX
Posts: 28
Info on passenger bucket seat lift lever

Installing utility buckets that PO had removed in favor of a bench...all the holes line up, no problem. Then I notice that because the seat folds forward, there are no fasteners holding the rear of the seat down. The lift lever and spring are present on the back of the seat, but appears to be missing part of the mechanism because the lever doesn’t disconnect the seat from anything and there’s nothing putting tension on the spring, it’s just sitting in a bracket. Will post pics of my own seat tomorrow, the pic below is a reference to show the lever I am referring to. Any insight as to what this is supposed to look like?
Attached Images
 
Jennandrand is offline   Reply With Quote
Old 02-09-2019, 10:11 PM   #2
jaros44sr
Registered User
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,408
Re: Info on passenger bucket seat lift lever

Quote:
Originally Posted by Jennandrand View Post
Installing utility buckets that PO had removed in favor of a bench...all the holes line up, no problem. Then I notice that because the seat folds forward, there are no fasteners holding the rear of the seat down. The lift lever and spring are present on the back of the seat, but appears to be missing part of the mechanism because the lever doesn’t disconnect the seat from anything and there’s nothing putting tension on the spring, it’s just sitting in a bracket. Will post pics of my own seat tomorrow, the pic below is a reference to show the lever I am referring to. Any insight as to what this is supposed to look like?
There s/b a bracket bolted to the floor, with a hole in it to latch the lever that is bolted to the seat. I'll try to post up a pic tomorrow
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is online now   Reply With Quote
Old 02-10-2019, 02:56 AM   #3
Classic Bowties
Always on the hunt...
 
Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,538
Re: Info on passenger bucket seat lift lever

Quote:
Originally Posted by jaros44sr View Post
There s/b a bracket bolted to the floor, with a hole in it to latch the lever that is bolted to the seat. I'll try to post up a pic tomorrow
Could the missing/needed floor bracket be the below type circled in red? Mel
Attached Images
 
Classic Bowties is offline   Reply With Quote
Old 02-10-2019, 08:41 PM   #4
Jennandrand
Registered User
 
Join Date: Oct 2016
Location: Tyler, TX
Posts: 28
Re: Info on passenger bucket seat lift lever

I assume that the bracket mounts to the floor so that the pointed piece (circled) sits in it. So what does the lever connect to?
Attached Images
 
Jennandrand is offline   Reply With Quote
Old 02-10-2019, 08:43 PM   #5
Jennandrand
Registered User
 
Join Date: Oct 2016
Location: Tyler, TX
Posts: 28
Re: Info on passenger bucket seat lift lever

Here are photos of my actual seat. One shows the spring mechanism, obviously missing some kind of part. What does the lever actually release from?
Attached Images
  
Jennandrand is offline   Reply With Quote
Old 02-11-2019, 12:35 AM   #6
Landondale
Registered User
 
Join Date: Jul 2018
Location: Concord, NC
Posts: 8
Re: Info on passenger bucket seat lift lever

Looks like you’re missing the pin that actually locks the seat down. It’s circled in the pic above. It is linked to the lever and is under spring tension. It sits perpendicularly to the pin that you have circled. Once the vertical pin is in the floor bracket, the one you’re missing latches under the floor bracket locking the seat in place.
Landondale is offline   Reply With Quote
Old 02-11-2019, 10:42 AM   #7
mister.freeze
Registered User
 
mister.freeze's Avatar
 
Join Date: Dec 2003
Location: Houston, TX
Posts: 734
Re: Info on passenger bucket seat lift lever

I have all that... PM.
__________________
'72 K5, known as 'the Fox.'
mister.freeze is offline   Reply With Quote
Old 02-11-2019, 05:12 PM   #8
Landondale
Registered User
 
Join Date: Jul 2018
Location: Concord, NC
Posts: 8
Re: Info on passenger bucket seat lift lever

It is missing the pin that runs through the spring that is attached to the lever via compression pin. It latches in the side of the floor mounted pice to secure the seat in the closed position.
Attached Images
  
Landondale is offline   Reply With Quote
Old 02-11-2019, 05:17 PM   #9
Jennandrand
Registered User
 
Join Date: Oct 2016
Location: Tyler, TX
Posts: 28
Re: Info on passenger bucket seat lift lever

AHHHH ha. thanks for the pics....now to find the parts!
Jennandrand is offline   Reply With Quote
Old 02-11-2019, 07:36 PM   #10
Classic Bowties
Always on the hunt...
 
Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,538
Re: Info on passenger bucket seat lift lever

Here are a couple more pictures of two different passenger side 71 K/5 utility bucket rear bracket setups for you to check out. Mel
.
Attached Images
  
Classic Bowties is offline   Reply With Quote
Old 02-11-2019, 08:52 PM   #11
Jennandrand
Registered User
 
Join Date: Oct 2016
Location: Tyler, TX
Posts: 28
Re: Info on passenger bucket seat lift lever

In case I need to figure out a way to reproduce this...so there is a rod running through the spring (circled)? If I were to make the part, could I just make it a pin that runs through the spring inside the bracket, or is the rest of the rod on the end functional somehow?
Attached Images
 
Jennandrand is offline   Reply With Quote
Old 02-11-2019, 09:52 PM   #12
1rippen6
Senior Member
 
Join Date: May 2011
Location: Greencastle PA
Posts: 6,682
Re: Info on passenger bucket seat lift lever

Quote:
Originally Posted by Jennandrand View Post
In case I need to figure out a way to reproduce this...so there is a rod running through the spring (circled)? If I were to make the part, could I just make it a pin that runs through the spring inside the bracket, or is the rest of the rod on the end functional somehow?
Look at post #7 mister_freeze says he has everything to pm him. The rod has a loop so you can release it from the side and don't have to reach behind the seat.
1rippen6 is offline   Reply With Quote
Old 02-13-2019, 02:04 PM   #13
mister.freeze
Registered User
 
mister.freeze's Avatar
 
Join Date: Dec 2003
Location: Houston, TX
Posts: 734
Re: Info on passenger bucket seat lift lever

mine is like post #4 without the loop
__________________
'72 K5, known as 'the Fox.'
mister.freeze is offline   Reply With Quote
Old 02-13-2019, 07:00 PM   #14
YoungPup1977
Account Suspended
 
Join Date: Jun 2015
Location: No longer here
Posts: 1,000
[QUOTE=mister.freeze;8463510]I have all that... PM.[/QUOTE


I have some too... 5 sets
Posted via Mobile Device
Attached Images
 
YoungPup1977 is offline   Reply With Quote
Old 02-13-2019, 10:40 PM   #15
Classics Fan
Registered User
 
Join Date: Jan 2018
Location: Anacortes. WA
Posts: 118
Re: Info on passenger bucket seat lift lever

So does anybody know what year or option came with the seat release lever with the hoop, allowing the seat to be released from the side? That’s a nice feature. My 71 Jimmy Super Custom doesn’t have it.
Posted via Mobile Device
Classics Fan is offline   Reply With Quote
Old 02-13-2019, 11:17 PM   #16
1rippen6
Senior Member
 
Join Date: May 2011
Location: Greencastle PA
Posts: 6,682
Re: Info on passenger bucket seat lift lever

Quote:
Originally Posted by Classics Fan View Post
So does anybody know what year or option came with the seat release lever with the hoop, allowing the seat to be released from the side? That’s a nice feature. My 71 Jimmy Super Custom doesn’t have it.
Posted via Mobile Device
I think all utility buckets had them sport buckets don't.
1rippen6 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com