The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Tools, Shops and Shop Safety

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-16-2015, 11:06 PM   #176
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

I installed stainless steel kick plates on the exterior man-doors.

I ordered some brush type weather/critter guard material for the headers of the roll-up doors. This should help seal out drafts, dust, birds, and flying insects like crazy June bugs.
Attached Images
   
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 03-16-2015, 11:15 PM   #177
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Speaking of insects I have a question. How many of you have problems with dirt daubers and how do you keep them in check? Here in North Texas they can be terrible. Not that they’re aggressive or sting, it’s the mess they make. I ask because I was trying to find some kind of screened guard for the PVC piping for my HVAC emergency drip pan drain line, the hot water T&P relief valve drain line, and the vent for the AC condenser line. I know over time these little boogers could/would clog the lines. I only found screened caps used for natural gas and propane vents but thought they were too expensive, and not to mention I would most likely need to modify them for my application. Anyway, I came up with an idea using water line filters, the gasket/screened filter combo for washing machines. I cut some ¼ inch rings from some ¾ inch PVC and used them to sandwich the filter gasket and then put the sandwich into ¾ inch PVC couplers using PVC glue. I call it the Triple D (Dirt Dauber Disabler) – patent pending…..lol. I hope it will work. My luck, the little boogers will build right on the screen.
Attached Images
   
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 03-16-2015, 11:19 PM   #178
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Final results -
Attached Images
  
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 03-16-2015, 11:21 PM   #179
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

I played with my new TV antenna too -
Attached Images
 
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 03-17-2015, 06:37 AM   #180
PGSigns
Senior Member
 
PGSigns's Avatar
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
Re: Our new shop - AKA Barnasaurus

I like the screen idea. Around here they will build on anything that is out of the rain and direct sunlight. Last summer they discovered my tractor. One in ever blind bolt hole in it. Shop is looking great. Your gonna need a bigger TV.
Jimmy
__________________
60 to 66 Chevy and GMC window decals
http://67-72chevytrucks.com/vboard/s...d.php?t=661131
Good friends, good food and a hotrod what else do you need?
1966 BBW long fleet Daily driver
1965 BBW short fleet Sold and going to a good home
1965 Suburban
2003 3500 Duramax
2005 Ultra Classic
PGSigns is offline   Reply With Quote
Old 03-17-2015, 08:03 PM   #181
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Thanks Jimmy -

The TV is a left over from days gone by. It should work good for the break area for news/weather stuff.

I know what you mean about those daubers, seems like over night they clog every hole they can on stuff you don't want them to.
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 03-18-2015, 06:43 AM   #182
PGSigns
Senior Member
 
PGSigns's Avatar
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
Re: Our new shop - AKA Barnasaurus

If we could just teach them to seal rust holes we would have something.
Jimmy
__________________
60 to 66 Chevy and GMC window decals
http://67-72chevytrucks.com/vboard/s...d.php?t=661131
Good friends, good food and a hotrod what else do you need?
1966 BBW long fleet Daily driver
1965 BBW short fleet Sold and going to a good home
1965 Suburban
2003 3500 Duramax
2005 Ultra Classic
PGSigns is offline   Reply With Quote
Old 03-19-2015, 07:44 AM   #183
rambler
MOVE OVER
 
rambler's Avatar
 
Join Date: Jun 2002
Location: Warrensburg, MO
Posts: 5,470
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by PGSigns View Post
If we could just teach them to seal rust holes we would have something.
Jimmy
lol.. now thats a great idea !
__________________
No matter where you are..... There you are...
Buckaroo Banzi
rambler is offline   Reply With Quote
Old 04-20-2015, 10:31 AM   #184
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Been a while since my last update. Spring finally showed up a couple of weeks ago - Yahoo!

Got metal going up under the mezzanine floor and sheet rock in the upstairs area.

Progress is always a good thing - even if it is slow
Attached Images
    
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 04-20-2015, 04:13 PM   #185
77c10
Registered User
 
77c10's Avatar
 
Join Date: Aug 2011
Location: Gallatin, TN
Posts: 782
Re: Our new shop - AKA Barnasaurus

Looking good Wayne. I'm definately envious.
__________________
77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint

"Cool ain't ever cheap and cheap ain't ever cool"
77c10 is offline   Reply With Quote
Old 04-20-2015, 05:00 PM   #186
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,017
Re: Our new shop - AKA Barnasaurus

And there's Ogre's seat. Looking really good!
Advanced Design is offline   Reply With Quote
Old 06-09-2015, 09:02 PM   #187
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by Advanced Design View Post
And there's Ogre's seat. Looking really good!
Lol.... I really hope Ogre can find the humor in this.....I do...lol.
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 06-09-2015, 09:08 PM   #188
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Here are some updates - Even a picture of the window seat for Ogre....
Attached Images
    
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 06-09-2015, 09:16 PM   #189
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by 77c10 View Post
Looking good Wayne. I'm definately envious.
Thanks so much for the compliment.
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 06-09-2015, 09:16 PM   #190
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,666
Re: Our new shop - AKA Barnasaurus

any ''action'' on that window seat yet?
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 06-09-2015, 09:18 PM   #191
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by _Ogre View Post
any ''action'' on that window seat yet?
Waiting on cushions......
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 06-10-2015, 11:50 PM   #192
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,666
Re: Our new shop - AKA Barnasaurus

hopefully your lovely bride doesn't read over your shoulder
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 06-11-2015, 07:03 AM   #193
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by _Ogre View Post
hopefully your lovely bride doesn't read over your shoulder
Oh she does. She's had some good laughs over the window seat verbage so all is good....
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 06-11-2015, 07:56 AM   #194
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,017
Re: Our new shop - AKA Barnasaurus

Looks really good! I like the light over the upstairs door. Reminds me of an old style gas station. Very nice.
Advanced Design is offline   Reply With Quote
Old 06-11-2015, 08:31 AM   #195
77c10
Registered User
 
77c10's Avatar
 
Join Date: Aug 2011
Location: Gallatin, TN
Posts: 782
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by Advanced Design View Post
Looks really good! I like the light over the upstairs door. Reminds me of an old style gas station. Very nice.
My thoughts exactly!
__________________
77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint

"Cool ain't ever cheap and cheap ain't ever cool"
77c10 is offline   Reply With Quote
Old 06-11-2015, 05:17 PM   #196
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by Advanced Design View Post
Looks really good! I like the light over the upstairs door. Reminds me of an old style gas station. Very nice.

Quote:
Originally Posted by 77c10
My thoughts exactly!

Thanks guys! That is exactly the look or feel I’ve been going for.
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.
Daddy'O is offline   Reply With Quote
Old 06-19-2015, 10:57 PM   #197
68C15
blood type; Retumbo
 
68C15's Avatar
 
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
Re: Our new shop - AKA Barnasaurus

So many questions to ask so I'll just go with the ones that keep popping in my head.

Tell us about the gas station islands out front. Also tell us more about the tornado/bomb shelter in the yard
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card
68C15 is offline   Reply With Quote
Old 06-20-2015, 07:45 AM   #198
Daddy'O
Registered User
 
Daddy'O's Avatar
 
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by 68C15 View Post
So many questions to ask so I'll just go with the ones that keep popping in my head.

Tell us about the gas station islands out front. Also tell us more about the tornado/bomb shelter in the yard
Ahhhh, the gas pump islands. This was actually my wife’s idea. We have a couple of restored pumps and she thought it would be cool to put them out front. I, on the other hand had no intentions of putting them outside. So she suggested finding some old unrestored ones for outside and I really liked the idea. This last minute upgrade to the concrete plans probably frustrated my concrete guy but he did a real good job as everyone that sees them ask if those are for gas pumps. He stops by occasionally and asks where my pumps are. I keep telling him I’ll get them when the prices comes down. Mike and Frank from American Pickers as well as other shows have made people think the old pumps are worth their weight in gold. I just cannot pay what they want for unrestored pumps now. Especially since my restored pumps cost me less years before the “junk shows” began.

The tornado shelter is a 6x8x7 (W,L,H) concrete box we had installed 19 years ago. We bought the property 25 years ago and have officially lived there for 20 years. I grew up in a small town south of Tulsa, Oklahoma and survived the June 8th, 1974 tornado outbreak so I’ve witnessed the power of mother nature first hand. This was a safety investment/insurance that I hoped we would never use. We’ve been in the “hidey hole” 2 times so far and I’m really glad to have had it. So has a neighbor…lol.

Thanks for the questions!
__________________
Cheers - Wayne

Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966
'55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157
1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy"
1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55
Nothing sucks more than that moment during an argument when you realize you're wrong.

Last edited by Daddy'O; 06-20-2015 at 12:19 PM. Reason: Corrected shelter dimensions.
Daddy'O is offline   Reply With Quote
Old 06-20-2015, 03:55 PM   #199
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Our new shop - AKA Barnasaurus

Quote:
Originally Posted by Daddy'O View Post
Ahhhh, the gas pump islands. This was actually my wife’s idea. We have a couple of restored pumps and she thought it would be cool to put them out front. I, on the other hand had no intentions of putting them outside. So she suggested finding some old unrestored ones for outside and I really liked the idea. This last minute upgrade to the concrete plans probably frustrated my concrete guy but he did a real good job as everyone that sees them ask if those are for gas pumps. He stops by occasionally and asks where my pumps are. I keep telling him I’ll get them when the prices comes down. Mike and Frank from American Pickers as well as other shows have made people think the old pumps are worth their weight in gold. I just cannot pay what they want for unrestored pumps now. Especially since my restored pumps cost me less years before the “junk shows” began.

The tornado shelter is a 6x8x7 (W,L,H) concrete box we had installed 19 years ago. We bought the property 25 years ago and have officially lived there for 20 years. I grew up in a small town south of Tulsa, Oklahoma and survived the June 8th, 1974 tornado outbreak so I’ve witnessed the power of mother nature first hand. This was a safety investment/insurance that I hoped we would never use. We’ve been in the “hidey hole” 2 times so far and I’m really glad to have had it. So has a neighbor…lol.

Thanks for the questions!
Everything is looking great Wayne.

I agree that Barrett Jackson, Frank, Mike and that Rick guy have all escalated prices on these items. Any thing cool now is out of reach for an average guy it seems. Just keep looking. I bought a 1954 National A64 pump un restored for under $500.00 in restorable condition. It may take some time but you can find these for an affordable price. Get on oldgas.com and you might get lucky there as well.

Take care friend,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 06-20-2015, 04:07 PM   #200
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,729
Re: Our new shop - AKA Barnasaurus

Hey Guys ,what would you pay for a pair of nice restored gas pumps ,I know a guy in Nashville with a couple he is considering selling .
flashed is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com