Plastic Kick Panels for Speakers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 09-16-2002, 08:06 AM

Has anyone bought these?. How do these attach to your existing metal ones and did you have any clearance problems with the emergency brake?. Thanks

XXL · 09-16-2002, 08:49 AM

I made some a couple of years ago but never used them. They're sitting in the garage catching dust right now. They cover part of the floor vent but don't have any interference with the ebrake. Also, I made them to fit a 6.5" speaker, which have a little more umph than 5" speakers. Also, I angled the pods toward the driver. I'll post a picture if I can make it to the garage in all this rain

Kenneth

*racedvl* · 09-16-2002, 09:26 AM

I would also like to see those pics.

RON WOODGEARD · 09-16-2002, 02:45 PM

I have the kick panel speaker holders, I was going to put them in the other day but my INFINITY speakers have too big of a magnet to fit. They stick out the back of the panels too far. And the way it looks if they would fit, it would hit the E-brake pedal.

Guess i need to go buy some different speakers.

RON

70c10 · 09-16-2002, 02:55 PM

Ron,
How do these attach to the existing kick panels?

photoglg · 09-16-2002, 04:49 PM

I put them in my 69. It is a tight fit for E-break and dimmer. You have to do some trimming for the vent handle. I glued and put screws at the corners. Here is a shot of the driver side.

SeAnScHeVy · 09-16-2002, 06:35 PM

where can i buy these kick panels also how much are they?

RON WOODGEARD · 09-16-2002, 07:37 PM

They say you can just slide them in place and the door rubber will hold them in.

Contact WES at www.classicheartbeat.com or PAUL at GMCPAULS.COM

Without speakers they cost about $70.00 and they have two different sets of speakers one so-so and the other good quality for about $100.00 more.

RON

nate68 · 09-16-2002, 07:51 PM

i got mine from rod doors put my own speakers

www.roddoors.com

09-16-2002, 08:06 AM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Plastic Kick Panels for Speakers Has anyone bought these?. How do these attach to your existing metal ones and did you have any clearance problems with the emergency brake?. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-16-2002, 08:49 AM	#2
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	I made some a couple of years ago but never used them. They're sitting in the garage catching dust right now. They cover part of the floor vent but don't have any interference with the ebrake. Also, I made them to fit a 6.5" speaker, which have a little more umph than 5" speakers. Also, I angled the pods toward the driver. I'll post a picture if I can make it to the garage in all this rain Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

09-16-2002, 02:55 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Ron, How do these attach to the existing kick panels? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-16-2002, 04:49 PM	#6
photoglg Registered User Join Date: Jul 2001 Location: Oxnard, CA Posts: 143	I put them in my 69. It is a tight fit for E-break and dimmer. You have to do some trimming for the vent handle. I glued and put screws at the corners. Here is a shot of the driver side. Attached Images __________________ 1969 GMC S/B S/S 3" drop

09-16-2002, 06:35 PM	#7
SeAnScHeVy Local Punk Join Date: Aug 2002 Location: GiLbErT, Az. Posts: 51	where do i get them? where can i buy these kick panels also how much are they? __________________ SeAn ThE cHeVy GoD

09-16-2002, 09:26 AM	#3
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	I would also like to see those pics.

09-16-2002, 02:45 PM	#4
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	I have the kick panel speaker holders, I was going to put them in the other day but my INFINITY speakers have too big of a magnet to fit. They stick out the back of the panels too far. And the way it looks if they would fit, it would hit the E-brake pedal. Guess i need to go buy some different speakers. RON

09-16-2002, 07:37 PM	#8
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	They say you can just slide them in place and the door rubber will hold them in. Contact WES at www.classicheartbeat.com or PAUL at GMCPAULS.COM Without speakers they cost about $70.00 and they have two different sets of speakers one so-so and the other good quality for about $100.00 more. RON

09-16-2002, 07:51 PM	#9
nate68 Registered User Join Date: Jan 2000 Location: ca Posts: 1,110	i got mine from rod doors put my own speakers www.roddoors.com __________________ 68 short step, 406/700r4, 9" w/discs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.