For sale: Hand-Made Custom LED Brake lights. - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

724x4a/cchevy · 09-06-2009, 09:46 PM

Quote:

Originally Posted by kamikazekyle05

Hey Justin, ive tried pm'ing you, im still interested in the doing the blue dots

PM sent! I'm going to say $100 for a pair of blue dots. I cleaned out my in/out box just in case it wasn't sending. I do my best to reply to everyone's replys and PM's.
Justin

extd56 · 09-15-2009, 06:28 PM

I sent you a PM about buying some taillight and cargo third brake light but did not get a response.

MudBug · 09-15-2009, 07:17 PM

Great looking lights.Have you figured out the sequential lights yet?

724x4a/cchevy · 09-16-2009, 12:00 PM

PM's replied to.

I really don't know that sequentials are possible on our trucks. Since the brake and turn signal wire are the same wire, there's no way to differentiate the two. Every time you hit the brakes it would blink sequential. I just don't think, without separating the brake light from the turn signal, it would be possible. You'd have to run an extra wire from the brake pedal and cut the brake wire going to the turn signal switch.
Justin

4tiresngas · 09-16-2009, 12:36 PM

I'd like a step of brake lights and back up lights for my 69 stepside. My truck is in the paint shop for a couple of weeks. I can ship you a tail light and back up light assembly if you can do your mock up and get my original lights back to me within two weeks.

I see there are several members interested in the stepside setup.

Let me know. I'm at Fort Leavenworth, so they could probably be in Harrisburg in 1-2 days via UPS.

Thanks,

724x4a/cchevy · 09-16-2009, 02:36 PM

There's a possibility I could do something like this. Personally I'd like them alot better If i could figure out a way to make them like a sunburst comming out from the center like a spider web. Unfortunately that just isn't possible with my X-Y grid boards. Note: I'm not producing these yet, this is a prototype. I don't have a lense to compare proportions with yet. This is kind of a guess.

4tiresngas · 09-17-2009, 04:17 PM

Send me a PM with your contact info. I can send you a taillight and backup light for you to use for a week or so.

NWD02 · 09-21-2009, 07:02 PM

Thanks again Justin... My wife bought lights from you last year around Christmas. I finally installed them today. Here's a picture of the tail light and reverse light. This is just the tail light, I'm not pushing the brake. It's super bright when the brake is pressed. I used clear taillight lens.

darkhorse970 · 09-21-2009, 07:37 PM

I can send you a lens fro a stepside if it would help you produce lights for them. I like th sunburst idea too!

*vegaschevy* · 09-22-2009, 05:39 PM

I would like a set of LED taillights to be used with clear lenses. Also reverse lights. What is the total and when can they ship?

**68jewel** · 09-28-2009, 11:11 AM

Guys, just bought a set of these lights. A pair of rear taillights and the reverse light. They are awesone. Just wanted to let you all know they are well worth it. He also made mine in a timely fashion so you better get yours before he gets backed-up with orders. LOL!! Keep up the good work.

extd56 · 09-28-2009, 05:23 PM

I was still wanting to get a set of the taillights and the cargo/third brake light.

JWPOORE · 10-12-2009, 06:43 PM

Quote:

85 chevy van sidemarkers are $40 each red and yellow

Is this price for a "pair" of either red or yellow or each individual sidemarker?

724x4a/cchevy · 10-12-2009, 11:18 PM

Quote:

Originally Posted by JWPOORE

Is this price for a "pair" of either red or yellow or each individual sidemarker?

Each individual light is $40.

On another note, I'm almost done with a set of blue dots for kamakaziekyle so I'll have a set to show pics of.
Justin

lofly'a · 10-13-2009, 03:28 PM

gotta get some of these soon, oh and i'm diggin that model A too.

724x4a/cchevy · 10-28-2009, 10:39 PM

Here's a shot of Kamakaziekyle's blue dots. They'd look better if I actually had some blue dots to put them behind.
Justin

kamikazekyle05 · 10-28-2009, 11:33 PM

These are gonna look awesome!

glimmertwin01 · 10-29-2009, 08:49 AM

very cool...

SANCHO · 10-29-2009, 08:30 PM

Those are FREAKIN awesome. You just sold me. I am going to find some blue dots and get my stuff together. Hit you up in the next week or so. Thanks for makin some cool lights.

Luba · 11-11-2009, 05:18 PM

Sent you a PM!

bigdnew · 11-11-2009, 07:13 PM

could you do something for a '73 blazer

HeavyD · 11-11-2009, 07:58 PM

I will take a set! Pm sent for order..thanks

scoyote · 11-11-2009, 08:17 PM

I have sent two PM's so far without any reply.

**wancosc356** · 11-11-2009, 09:20 PM

Patience is a virtue....right? He is working on a set for me right now. Im sure he will get back to everyone when he can.

extd56 · 11-11-2009, 09:50 PM

Actually I have been trying to get a taillight and a cargo light/ third brake light set made for awhile, amybe he missed my messages.

09-15-2009, 06:28 PM	#227
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: For sale: Hand-Made Custom LED Brake lights. I sent you a PM about buying some taillight and cargo third brake light but did not get a response.

09-15-2009, 07:17 PM	#228
MudBug Registered User Join Date: Jan 2007 Location: tennessee Posts: 159	Re: For sale: Hand-Made Custom LED Brake lights. Great looking lights.Have you figured out the sequential lights yet?

09-16-2009, 12:00 PM	#229
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: For sale: Hand-Made Custom LED Brake lights. PM's replied to. I really don't know that sequentials are possible on our trucks. Since the brake and turn signal wire are the same wire, there's no way to differentiate the two. Every time you hit the brakes it would blink sequential. I just don't think, without separating the brake light from the turn signal, it would be possible. You'd have to run an extra wire from the brake pedal and cut the brake wire going to the turn signal switch. Justin __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

09-16-2009, 12:36 PM	#230
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Re: For sale: Hand-Made Custom LED Brake lights. I'd like a step of brake lights and back up lights for my 69 stepside. My truck is in the paint shop for a couple of weeks. I can ship you a tail light and back up light assembly if you can do your mock up and get my original lights back to me within two weeks. I see there are several members interested in the stepside setup. Let me know. I'm at Fort Leavenworth, so they could probably be in Harrisburg in 1-2 days via UPS. Thanks, __________________ Dan dan.brue@us.army.mil

09-16-2009, 02:36 PM	#231
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: For sale: Hand-Made Custom LED Brake lights. There's a possibility I could do something like this. Personally I'd like them alot better If i could figure out a way to make them like a sunburst comming out from the center like a spider web. Unfortunately that just isn't possible with my X-Y grid boards. Note: I'm not producing these yet, this is a prototype. I don't have a lense to compare proportions with yet. This is kind of a guess. __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

09-17-2009, 04:17 PM	#232
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Re: For sale: Hand-Made Custom LED Brake lights. Send me a PM with your contact info. I can send you a taillight and backup light for you to use for a week or so. __________________ Dan dan.brue@us.army.mil

09-21-2009, 07:02 PM	#233
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: For sale: Hand-Made Custom LED Brake lights. Thanks again Justin... My wife bought lights from you last year around Christmas. I finally installed them today. Here's a picture of the tail light and reverse light. This is just the tail light, I'm not pushing the brake. It's super bright when the brake is pressed. I used clear taillight lens. Attached Images

09-21-2009, 07:37 PM	#234
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: For sale: Hand-Made Custom LED Brake lights. I can send you a lens fro a stepside if it would help you produce lights for them. I like th sunburst idea too! __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

09-22-2009, 05:39 PM	#235
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: For sale: Hand-Made Custom LED Brake lights. I would like a set of LED taillights to be used with clear lenses. Also reverse lights. What is the total and when can they ship?

09-28-2009, 11:11 AM	#236
68jewel On the path to financial ruin! Join Date: Jan 2009 Location: Dallas, TX Posts: 722	Re: For sale: Hand-Made Custom LED Brake lights. Guys, just bought a set of these lights. A pair of rear taillights and the reverse light. They are awesone. Just wanted to let you all know they are well worth it. He also made mine in a timely fashion so you better get yours before he gets backed-up with orders. LOL!! Keep up the good work. __________________ *'72 Chevelle SS--4.0 Whipple LS7, T56 Magnum, 20X9/20X13 HRE 791R, 6-piston Baer brakes, IRS '68 SWB C10--LS3, TKO-600, 22x10/22x12 HRE 948R, C5 suspension, shockwaves, custom frame Ooh Wee's Makeover*...http://67-72chevytrucks.com/vboard/s...d.php?t=376280

09-28-2009, 05:23 PM	#237
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: For sale: Hand-Made Custom LED Brake lights. I was still wanting to get a set of the taillights and the cargo/third brake light.

10-13-2009, 03:28 PM	#240
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: For sale: Hand-Made Custom LED Brake lights. gotta get some of these soon, oh and i'm diggin that model A too. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project Last edited by lofly'a; 10-13-2009 at 03:29 PM.

10-28-2009, 10:39 PM	#241
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: For sale: Hand-Made Custom LED Brake lights. Here's a shot of Kamakaziekyle's blue dots. They'd look better if I actually had some blue dots to put them behind. Justin __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

10-28-2009, 11:33 PM	#242
kamikazekyle05 Registered User Join Date: Nov 2007 Location: Vernon, Texas Posts: 331	Re: For sale: Hand-Made Custom LED Brake lights. These are gonna look awesome!

10-29-2009, 08:49 AM	#243
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: For sale: Hand-Made Custom LED Brake lights. very cool... __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style



Register or Log In To remove these advertisements.

10-29-2009, 08:30 PM	#244
SANCHO Registered User Join Date: Jan 2009 Location: Cypress,Texas Posts: 62	Re: For sale: Hand-Made Custom LED Brake lights. Those are FREAKIN awesome. You just sold me. I am going to find some blue dots and get my stuff together. Hit you up in the next week or so. Thanks for makin some cool lights.

11-11-2009, 05:18 PM	#245
Luba Registered User Join Date: Sep 2005 Location: Bay City, MI Posts: 128	Re: For sale: Hand-Made Custom LED Brake lights. Sent you a PM!

11-11-2009, 07:13 PM	#246
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: For sale: Hand-Made Custom LED Brake lights. could you do something for a '73 blazer

11-11-2009, 07:58 PM	#247
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,170	Re: For sale: Hand-Made Custom LED Brake lights. I will take a set! Pm sent for order..thanks __________________ "You can take the man out of PA, but you can't take PA out of the man"

11-11-2009, 08:17 PM	#248
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: For sale: Hand-Made Custom LED Brake lights. I have sent two PM's so far without any reply. __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

11-11-2009, 09:20 PM	#249
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: For sale: Hand-Made Custom LED Brake lights. Patience is a virtue....right? He is working on a set for me right now. Im sure he will get back to everyone when he can. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-11-2009, 09:50 PM	#250
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: For sale: Hand-Made Custom LED Brake lights. Actually I have been trying to get a taillight and a cargo light/ third brake light set made for awhile, amybe he missed my messages.

Register or Log In To remove these advertisements.