The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-13-2015, 08:56 PM   #1
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
1964 GMC 4X4 Longbed

Hey folks, I'm new to the forum here and I'm currently in the process of restoring a 1964 GMC factory 4WD fleetside longbed. I'll try to keep up with posting progress as it goes along.

Little background on the truck....
I am about the 4th owner. The last two I know of were from town. It was mainly used as a plow truck for years until a friend of my fathers bought it around 2004. He had plans to restore but didn't have the time. Over this past winter I was thinking about buying or restoring another truck and decided on this one.
It's in rough shape, but I know I'll be able to bring it back. When I do restorations (mainly tractors) I've always been one for stock look or darn close to it. So this what I'll be doing for the '64. Still up in the air whether to go chrome again or the standard white.

I've been reading through the FAQ index for the past week or so, but still have a couple questions to ask and figured you guys should be able to answer them, seems to be more info on the Chevys than GMC...

1. Would my truck originally have come with hub caps? I can't seem to find any pictures of 4WD trucks after '63 with them.

2. The original split rims were removed long ago, were they 16's or 16.5. I have a nice set of 16.5 with mud and snow tires that I'm thinking of using on the truck.

3. Does anyone have the paint code for the original interior color? I'd assume it's the same as Chevy....

That's all I can think of for now, I'm sure there will be more down the road!

Here's some pictures. Videos on my YT page- 5Tractorguy

Name:  DSCN9666.jpg
Views: 995
Size:  91.9 KB Name:  DSCN9683.jpg
Views: 989
Size:  84.1 KB

Name:  DSCN9671.jpg
Views: 970
Size:  74.9 KB Name:  DSCN9662.jpg
Views: 949
Size:  71.2 KB

Name:  DSCN9652.jpg
Views: 965
Size:  41.1 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Old 06-13-2015, 08:59 PM   #2
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
Re: 1964 GMC 4X4 Longbed

More pics...

Name:  DSCN9653.jpg
Views: 951
Size:  43.9 KB Name:  DSCN9672.jpg
Views: 966
Size:  60.3 KB

Name:  DSCN9883.jpg
Views: 936
Size:  75.4 KB Name:  DSCN9967.jpg
Views: 942
Size:  79.8 KB

Name:  DSCN9977.jpg
Views: 947
Size:  59.5 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Old 06-13-2015, 09:03 PM   #3
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
Re: 1964 GMC 4X4 Longbed

And more... Parts trucks. Blue '66 4WD 1/2 ton, maroon '64.

Name:  DSCN9783.jpg
Views: 989
Size:  73.4 KB Name:  DSCN9818.jpg
Views: 971
Size:  79.4 KB

Name:  DSCN9727.jpg
Views: 972
Size:  86.7 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Old 06-13-2015, 11:08 PM   #4
DPowers
One foot in front of the other
 
DPowers's Avatar
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,421
Re: 1964 GMC 4X4 Longbed

Nice trucks. Welcome
You will find a ton of GMC info here:

http://6066gmcguy.com/
DPowers is offline   Reply With Quote
Old 06-13-2015, 11:34 PM   #5
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,729
Re: 1964 GMC 4X4 Longbed

Im in to see this build ,its going to be fun .And by the way if you want to sell a license plate off of it I would be interested .
flashed is offline   Reply With Quote
Old 06-13-2015, 11:57 PM   #6
Classic v6 GMC's
Senior Member
 
Classic v6 GMC's's Avatar
 
Join Date: Mar 2015
Location: Arizona from Overland Park Kansas
Posts: 3,968
Re: 1964 GMC 4X4 Longbed

Welcome to the forum and it looks like you have a nice optioned truck with custom trim, emergency flasher and power brakes. I think that no 64-66 gmc 4x4's came with hubcaps (but you could add them). Could you post a better pic of the gauges in the dash? If they are the oil pressure and ammeter gauges they could be factory options as well.
Classic v6 GMC's is offline   Reply With Quote
Old 06-14-2015, 08:03 AM   #7
RustyBurb
Registered User
 
Join Date: Jun 2014
Location: Naples, Florida
Posts: 45
Re: 1964 GMC 4X4 Longbed

Welcome to the forum! Love the GMC 4x4's. My truck has the same Northeast plow history. You've got some nice trim on that truck, I'd be inclined to go with chrome but the white will be a lot cheaper. I'll enjoy watching your build!
RustyBurb is offline   Reply With Quote
Old 06-14-2015, 08:35 AM   #8
RANDY COX
Registered User
 
RANDY COX's Avatar
 
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
Re: 1964 GMC 4X4 Longbed

Wow KOOL truck power steering and power brakes, and 4x4 to boot, I'm Subscribed... and 3/4 ton....
__________________
1964 BBC 402 4x4
RANDY COX is offline   Reply With Quote
Old 06-14-2015, 09:17 AM   #9
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
Re: 1964 GMC 4X4 Longbed

Quote:
Originally Posted by flashed View Post
Im in to see this build ,its going to be fun .And by the way if you want to sell a license plate off of it I would be interested .
I wouldn't mind selling you one, but those went back to the guy I bought it from.

Quote:
Originally Posted by RustyBurb View Post
Welcome to the forum! Love the GMC 4x4's. My truck has the same Northeast plow history. You've got some nice trim on that truck, I'd be inclined to go with chrome but the white will be a lot cheaper. I'll enjoy watching your build!
Thanks! If I go chrome I have to find another chrome grill since this one is rotted through in a couple small spots. It's a toss up though, depends how many pictures of 4WD trucks I find with and without chrome, I like the looks of either style.

Quote:
Originally Posted by Classic v6 GMC's View Post
Welcome to the forum and it looks like you have a nice optioned truck with custom trim, emergency flasher and power brakes. I think that no 64-66 gmc 4x4's came with hubcaps (but you could add them). Could you post a better pic of the gauges in the dash? If they are the oil pressure and ammeter gauges they could be factory options as well.
May leave them off then, probably keep the wheels painted black. Sure here's some pics...

Name:  DSCN0262.jpg
Views: 932
Size:  41.6 KB Name:  DSCN0264.jpg
Views: 935
Size:  48.8 KB

Name:  DSCN0265.jpg
Views: 930
Size:  47.3 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Old 06-14-2015, 09:49 AM   #10
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: 1964 GMC 4X4 Longbed

Thought I recognized that name!!! I been watchin you on youtube! Great to see ya found out about this forum. I'm in! I have a 64 GMC 1500 with a 305E I'm having fun with myself. So far I have put a 600 edelbrock 4 barrel on the beast. Too much torque now. haha
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 06-14-2015, 10:20 AM   #11
MikeB
Senior Member
 
MikeB's Avatar
 
Join Date: Jul 2000
Location: North Texas
Posts: 3,378
Re: 1964 GMC 4X4 Longbed

Gotta love the washtub to keep rain out of the engine. I'm currently doing a 250 six/manual trans to 350/TH350 swap on the wrong side (outside) of my garage, so I can appreciate what you're dealing with. Thank goodness mine's on pavement, and the garage is in the back so the neighbors don't complain. That's me on the right.

__________________
Mike
1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
MikeB is offline   Reply With Quote
Old 06-14-2015, 09:14 PM   #12
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
Re: 1964 GMC 4X4 Longbed

Quote:
Originally Posted by TJ's Chevy View Post
Thought I recognized that name!!! I been watchin you on youtube! Great to see ya found out about this forum. I'm in! I have a 64 GMC 1500 with a 305E I'm having fun with myself. So far I have put a 600 edelbrock 4 barrel on the beast. Too much torque now. haha
Hey TJ! I knew that truck looked familiar....

Quote:
Originally Posted by MikeB View Post
Gotta love the washtub to keep rain out of the engine. I'm currently doing a 250 six/manual trans to 350/TH350 swap on the wrong side (outside) of my garage, so I can appreciate what you're dealing with. Thank goodness mine's on pavement, and the garage is in the back so the neighbors don't complain. That's me on the right.
Sounds like you got a good project there Mike. I like that '82 also! I have an '88 1ton dump that is my daily driver, 350tbi with TH400. Luckily at our house we have a paved drive to work on that is somewhat level, those pics were from my fathers friends place which is all gravel and dirt.



Finally got things rolling today on the cab. (I'm using the cab off the maroon parts truck and the gold Chevy cab for parts). Cut out a section of the drivers side floor along with rockers. Tacked in floor patch, cut door post to fit new piece and cut out for kick panel. My dad found some rust inhibitor stuff in a spray can that is supposed to be very good (it's a 2 part), and it came with a 18" wand. So I sprayed all up inside the door post to try and stem the rust. When the roof comes off for repair I'll spray the top half of the post.

Name:  DSCN0257.jpg
Views: 944
Size:  97.0 KB Name:  DSCN0277.jpg
Views: 946
Size:  102.9 KB

Name:  DSCN0229.jpg
Views: 914
Size:  63.0 KB Name:  DSCN0269.jpg
Views: 950
Size:  101.7 KB

Name:  DSCN0273.jpg
Views: 933
Size:  63.6 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Old 06-14-2015, 10:13 PM   #13
MikeB
Senior Member
 
MikeB's Avatar
 
Join Date: Jul 2000
Location: North Texas
Posts: 3,378
Re: 1964 GMC 4X4 Longbed

I'm amazed at what you're doing to the cab. I'd be overwhelmed, and wouldn't know where to start!
__________________
Mike
1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
MikeB is offline   Reply With Quote
Old 06-15-2015, 12:09 AM   #14
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: 1964 GMC 4X4 Longbed

Great work on fixin that cab!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 06-15-2015, 03:00 AM   #15
argonaut
Senior Member
 
argonaut's Avatar
 
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
Re: 1964 GMC 4X4 Longbed

Cool project! Looks a lot like what I started with when I got Big Ugly. These old trucks sure did get beating!
__________________
Jason M. @argonaut62

1972 K5 Blazer CST, Turquoise
1966 K20 Short Fleet Pickup, Big Ugly
1964 C10 Short Fleet, Gertrude

2001 Porsche 911 Carrera
1996 Ford Bronco XLT
1980 Jeep Wagoneer

2008 Honda CBR1000RR
2005 Honda RC51
1981 Honda CB750C


No dis-assemble Johnny Five! No dis-assemble!
argonaut is offline   Reply With Quote
Old 06-15-2015, 07:25 AM   #16
Lokin4AReason
Registered User
 
Lokin4AReason's Avatar
 
Join Date: Oct 2014
Location: a beer can ..
Posts: 924
Re: 1964 GMC 4X4 Longbed

looks like a fun build =0) and welcome to the show ...
__________________
dont want to hear excuses, i want to hear solution(s)
Lokin4AReason is offline   Reply With Quote
Old 06-16-2015, 11:28 AM   #17
Justin@EntropyRad
Registered User
 
Justin@EntropyRad's Avatar
 
Join Date: Jan 2015
Location: Charlotte, NC
Posts: 483
Re: 1964 GMC 4X4 Longbed

Pretty sweet!
__________________
* Call me NOT the website number*
Justin Novick
(773) 303-8251
Sales/Support
Entropy Radiator / Engineered Cooling Products
"The Sexiest Radiators For The Sexiest Hot Rods" - www.EntropyRad.com www.speedcooling.com
Justin@EntropyRad is offline   Reply With Quote
Old 06-16-2015, 12:02 PM   #18
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: 1964 GMC 4X4 Longbed

Great looking projects and nice progress so far!!!!
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 06-16-2015, 12:51 PM   #19
61K10
Registered User
 
61K10's Avatar
 
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 3,039
Re: 1964 GMC 4X4 Longbed

looks like you have enough parts to build with. And i thought my cab rockers was bad lol. As argonuat says these tk's were well used and abused. there wasn't a panel on mine that didn't have a dent, still have waves and some dents haha.----have fun with your build.
__________________
1961 chevy K10

my build is------------61K10 build
61K10 is offline   Reply With Quote
Old 06-21-2015, 10:16 AM   #20
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
Re: 1964 GMC 4X4 Longbed

Got some more done on the cab yesterday. Finished tacking up the drivers side kick panel and door post. Then began removing the rocker from the passenger side. Didn't get as much done as I wanted to but at least it's still moving along!

Name:  DSCN0314.jpg
Views: 840
Size:  108.1 KB Name:  DSCN0306.jpg
Views: 841
Size:  109.8 KB

Name:  DSCN0313.jpg
Views: 829
Size:  109.8 KB Name:  DSCN0315.jpg
Views: 861
Size:  106.3 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Old 06-21-2015, 11:22 PM   #21
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: 1964 GMC 4X4 Longbed

I'd go insane with all that rot. Nice work!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 08-16-2015, 06:52 PM   #22
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
Re: 1964 GMC 4X4 Longbed

Alright, long time no post! Had a busy month or so with tractor shows and side work. So the cab has been moving along slowly. As of now both sides have had the door post, kick panels, and floors completed. I'm working on the bracing on the underside now, that will be going back on this week. I pulled it off so I could replace that strip that runs along the bottom edge of the cab, there was a lot of blistered rust behind it.

Name:  DSCN4069.jpg
Views: 761
Size:  66.4 KB Name:  DSCN4070.jpg
Views: 827
Size:  70.4 KB

Name:  DSCN4068.jpg
Views: 758
Size:  67.1 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Old 08-16-2015, 07:27 PM   #23
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,830
Re: 1964 GMC 4X4 Longbed

Looking great, I'm in
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
Ol Blue K20 is offline   Reply With Quote
Old 08-16-2015, 11:16 PM   #24
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: 1964 GMC 4X4 Longbed

Nice work!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 09-21-2015, 07:40 PM   #25
5Tractorguy
Registered User
 
5Tractorguy's Avatar
 
Join Date: May 2015
Location: Central Massachusetts
Posts: 493
Re: 1964 GMC 4X4 Longbed

More progress!

All the bracing is back together on the bottom of the cab. I also made a frame for it to sit on so we can move it around and flip it.

Now that it's back into position the roof has been pulled along with the firewall. I spent the past two weeks concentrating on the front where the firewall goes. Did a lot of patch work around the vent bucket holes and made a new top lip where it spot welds together. Got that all ground smooth after work today, still have to knock some of the metal flat in that area.

Next I'll be fixing the firewall from the Chevy donor cab. I need to weld new bottoms to each side where it attaches to the floor and cut out for the 4WD hump.

Then onto the roof. All the bracing on top of the door posts has to be done, the top door jamb on the passenger side (taking off Chevy cab), and the front windshield-to-roof lip, that piece I ordered new.

Let me tell ya, you southern/west coast guys on here who complain about cab rust and rot have a cake walk compared to what this cab has been!! Nothing like some good 'ol northern road salt....

Name:  DSCN4080.jpg
Views: 716
Size:  69.4 KB Name:  DSCN4082.jpg
Views: 707
Size:  73.4 KB

Name:  DSCN4084.jpg
Views: 715
Size:  77.3 KB Name:  DSCN4088.jpg
Views: 710
Size:  72.3 KB

Name:  DSCN4089.jpg
Views: 635
Size:  74.2 KB
__________________
Jake

5Tractorguy on Youtube
5Tractorguy is offline   Reply With Quote
Reply

Bookmarks

Tags
1964, 4wd, 4x4, fleetside, gmc

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com