CA Parting out 84 Chevy 3/4 ton 4x4* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jchav62 · 12-16-2009, 10:58 AM

Quote:

Originally Posted by KrazyRay

The carb is a Q jet style. Its relatively new but the PO said that it was too big for a stock 350. I think he said it was 800 but I doubt it is that big. Any ideas to find out size? I will do $100 shipped on that carb and I will verify the running condition when I start up the engine. Thanks, Ray

Thanks for the response Ray. 800 may be a little much, but it sounds right for a Q-jet. Anyhow, I gonna have to pass for now with Christmas and all. I'll check in with after the holidays to see if it's still around.

Thanks again and Merry Christmas.

Sarge261 · 12-16-2009, 01:56 PM

Ray,

Thanks for the reply, if you have the hinge let me know and throw it in the box, if not, let me know how you would like payment and I will get it to ya.

Thanks,

Sarge

2badgn · 12-16-2009, 05:49 PM

Quote:

Originally Posted by KrazyRay

Yes, the price includes harness and switch. WestButteTruck is first in line. I will check another truck for dome light with harness. If I have one it will be $20 shipped. Thanks, Ray

I am very interested in the interior dome light with the complete harness to the fuse box. My truck is currently at the body shop being restored so time is of the essence! If u locate it, please let me know asap. Thanks. I can do without the cargo light but it would be great to have a dome light as my 84 GMC did not come with one. It only has a light at the bottom that u must operate manually.

Frank
maz18@verizon.net

Scootin 81 C20 · 12-16-2009, 09:05 PM

Ok, I'll pass on the gauges as mine all work. I was hoping that one would be a small tach, I'm looking for one if you have one. Still interested in the speaker brackets though.

alf4444 · 12-16-2009, 10:54 PM

56" rear springs? How much shipped to 84118?

KrazyRay · 12-17-2009, 02:25 PM

more pics for 87 Bob.

Sarge261 · 12-17-2009, 03:06 PM

If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?

Thanks,

Sarge

DBLSPRT68 · 12-17-2009, 09:03 PM

I'd be interested in the carb also, when you find out if the engine runs or not. Let me know, no hurry. David

KrazyRay · 12-18-2009, 01:32 AM

Quote:

Originally Posted by alf4444

56" rear springs? How much shipped to 84118?

Sorry, the springs went with the back end of the frame.

KrazyRay · 12-18-2009, 01:39 AM

Quote:

Originally Posted by DBLSPRT68

I'd be interested in the carb also, when you find out if the engine runs or not. Let me know, no hurry. David

It might be a couple of weeks before I get the engine going. I will let you know. Thanks, Ray

Scootin 81 C20 · 12-18-2009, 09:04 AM

Any news on the speaker brackets?

Thanks
Benjamin.

KrazyRay · 12-18-2009, 11:46 AM

Quote:

Originally Posted by Scootin 81 C20

Any news on the speaker brackets?

Thanks
Benjamin.

I haven't had a chance to pull them, but I'm looking for $5 each plus shipping. Thanks, Ray

Sarge261 · 12-18-2009, 01:53 PM

Quote:

Originally Posted by Sarge261

If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?

Thanks,

Sarge

Hey Ray,

Are these still available as well as the other stuff I asked about...just checking not being pushy. I am in no hurry, just tryin to gather some parts.

Thanks,

Sarge

Scootin 81 C20 · 12-18-2009, 05:30 PM

Ok, so about $12-$15?

KrazyRay · 12-18-2009, 07:53 PM

Quote:

Originally Posted by Sarge261

Hey Ray,

Are these still available as well as the other stuff I asked about...just checking not being pushy. I am in no hurry, just tryin to gather some parts.

Thanks,

Sarge

The trim is sold. I'll have to get back with you in a couple of days on the glove box. Some of my parts are several miles away. Thanks, Ray

Sarge261 · 12-18-2009, 08:46 PM

No problem Ray,

I will take the trim you already talked to me about...unles it sold, and hopefully your glove box is good...

Take your time I am in no hurry..

Thanks,

Sarge

KrazyRay · 12-18-2009, 10:41 PM

Quote:

Originally Posted by Sarge261

No problem Ray,

I will take the trim you already talked to me about...unles it sold, and hopefully your glove box is good...

Take your time I am in no hurry..

Thanks,

Sarge

The headliner trim is yours. The A pillar etc is gone. Thanks, Ray

KrazyRay · 12-18-2009, 10:44 PM

Quote:

Originally Posted by Scootin 81 C20

Ok, so about $12-$15?

I'm hoping to be able to stuff them in a small flat rate box for $5 unless you have ideas to save on shipping. Thanks, Ray

Scootin 81 C20 · 12-18-2009, 10:53 PM

Is that the smallest rate they have? If so, so be it. I don't really have any ideas unless you can think of anything else I could use or need to make the shipping worth it.

Sarge261 · 12-20-2009, 07:29 PM

Quote:

Originally Posted by KrazyRay

The headliner trim is yours. The A pillar etc is gone. Thanks, Ray

Thanks Ray,

Let me know how you would like payment (pay pal, Check or money order etc.) I will get it out to you...just let meknow the total again and how you want it.

Sarge

Dudewith4x4 · 12-20-2009, 10:41 PM

I would buy the gauge holder or what you call the bezel I guess. Also the billet grille.

KrazyRay · 12-20-2009, 11:29 PM

Quote:

Originally Posted by Sarge261

If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge?

Thanks,

Sarge

Yes, the hinge is part of the glove box. I can sell the glove box minus metal lid for $25 shipped. It is hard to find a good hinge...out of 8 trucks, I could find only 2 that haven't split apart yet. It would be better to ship the glove box separate than the trim because it would take a long bulky box to fit both. pm sent. Thanks, Ray

Dudewith4x4 · 12-20-2009, 11:38 PM

Hey.. Do you have the bezel still?

KrazyRay · 12-20-2009, 11:45 PM

Quote:

Originally Posted by Dudewith4x4

I would buy the gauge holder or what you call the bezel I guess. Also the billet grille.

The gauge bezel shipped to Mo would be $32 total shipped. The billet grill is a flimsy piece of crap that is bowed in the center. I don't recommend this for anyone. Thanks, Ray

Dudewith4x4 · 12-20-2009, 11:47 PM

would you go any cheaper?

12-16-2009, 01:56 PM	#27
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting out 84 Chevy 3/4 ton 4x4 Ray, Thanks for the reply, if you have the hinge let me know and throw it in the box, if not, let me know how you would like payment and I will get it to ya. Thanks, Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

12-16-2009, 09:05 PM	#29
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Ok, I'll pass on the gauges as mine all work. I was hoping that one would be a small tach, I'm looking for one if you have one. Still interested in the speaker brackets though. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-16-2009, 10:54 PM	#30
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: Parting out 84 Chevy 3/4 ton 4x4 56" rear springs? How much shipped to 84118? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-17-2009, 02:25 PM	#31
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 84 Chevy 3/4 ton 4x4 more pics for 87 Bob. Attached Images

12-17-2009, 03:06 PM	#32
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting out 84 Chevy 3/4 ton 4x4 If the a pillar trim and the rear cab/b post trim is available how much will that add to the shipping for me. And it looks like I will need the whole glove box to get the hinge? Thanks, Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

12-17-2009, 09:03 PM	#33
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: Parting out 84 Chevy 3/4 ton 4x4 I'd be interested in the carb also, when you find out if the engine runs or not. Let me know, no hurry. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

12-18-2009, 09:04 AM	#36
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Any news on the speaker brackets? Thanks Benjamin. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-18-2009, 05:30 PM	#39
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Ok, so about $12-$15? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-18-2009, 08:46 PM	#41
Sarge261 Registered User Join Date: Sep 2009 Location: Upstate NY Posts: 395	Re: Parting out 84 Chevy 3/4 ton 4x4 No problem Ray, I will take the trim you already talked to me about...unles it sold, and hopefully your glove box is good... Take your time I am in no hurry.. Thanks, Sarge __________________ 1997 GMC Yukon Western Mid Weight Plow Project THOR

12-18-2009, 10:53 PM	#44
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 84 Chevy 3/4 ton 4x4 Is that the smallest rate they have? If so, so be it. I don't really have any ideas unless you can think of anything else I could use or need to make the shipping worth it. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-20-2009, 10:41 PM	#46
Dudewith4x4 Momma Tried. Join Date: Dec 2009 Location: Exeter Mo Posts: 319	Re: Parting out 84 Chevy 3/4 ton 4x4 I would buy the gauge holder or what you call the bezel I guess. Also the billet grille. __________________ *Ross* 1980 c10 4x4 project (Sold):http://67-72chevytrucks.com/vboard/s...d.php?t=377155 1999 F-150 4x4 (DD) Saving up for a 64 17 and loving it. AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever!

12-20-2009, 11:38 PM	#48
Dudewith4x4 Momma Tried. Join Date: Dec 2009 Location: Exeter Mo Posts: 319	Re: Parting out 84 Chevy 3/4 ton 4x4 Hey.. Do you have the bezel still? __________________ *Ross* 1980 c10 4x4 project (Sold):http://67-72chevytrucks.com/vboard/s...d.php?t=377155 1999 F-150 4x4 (DD) Saving up for a 64 17 and loving it. AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever!

12-20-2009, 11:47 PM	#50
Dudewith4x4 Momma Tried. Join Date: Dec 2009 Location: Exeter Mo Posts: 319	Re: Parting out 84 Chevy 3/4 ton 4x4 would you go any cheaper? __________________ *Ross* 1980 c10 4x4 project (Sold):http://67-72chevytrucks.com/vboard/s...d.php?t=377155 1999 F-150 4x4 (DD) Saving up for a 64 17 and loving it. AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.