MS Parting out 1974 K5 4x4 Blazer

[bigdnew]

Alright, let’s go. I am parting out a 1974 K5 Blazer. I was hit New Year’s Day on the driver side and was ran off the road the frame is bent. However, truck still runs and I drove it today. I would prefer pick up on large parts and all prices are for parts only. Shipping is additional.

Original 350 SOLD
Three speed w/granny $200.00
NP 205 Transfer case $125.00
Front Dana 40 $125.00
Grill SOLD
Centerline 16X10 $300.00
2 Inch wheel spacers $50.00
Hood $75.00
Original 15x7 ralleys w/ center caps $125.00
Back Seat, foam good needs cover $50.00
Front buckets/ needs reupholstering and foam on driver $100.00
Fiberglass top $100.00
Homemade Brushguard $50.00

I’m sure I could post additional parts and prices but we will start with this.

1974 Blazer :: DSC_0258.flv video by bigdnew -...

[centexan]

wishing you were closer. I would love 3-4 things listed but Austin Texas is a long way away. I am drooling over the top. I can't seem to find one locally. Good luck!

[71blksuper4x4]

do you have pics of the buckets? Trevor

[f.monroe]

If the factory rallys are indeed 15x7 , I think you might be better off to advertise them on the 67-72 page .They fit the two wheel drive 6 lug trucks and look great on the front when paired with the 15x8 rears . Just a thought .
Frank

[bigdnew]

Originally Posted by 71blksuper4x4

do you have pics of the buckets? Trevor

will have them posted in the morning.

Originally Posted by f.monroe

If the factory rallys are indeed 15x7 , I think you might be better off to advertise them on the 67-72 page .They fit the two wheel drive 6 lug trucks and look great on the front when paired with the 15x8 rears . Just a thought .
Frank

I will measure them tomorrow to make sure i did not misspeak.

[bigdnew]

[glimmertwin01]

bummer you got hit...
if you have em... Ill take the K% blazer fender emblems and the torsion boxes (the plates that cover the floor under the cab area)

[bigdnew]

Originally Posted by glimmertwin01

bummer you got hit...
if you have em... Ill take the K% blazer fender emblems and the torsion boxes (the plates that cover the floor under the cab area)

i have to find the fender emblems. they are in pretty decent shape and i will look into the plates.

[glimmertwin01]

very cool..I could use em.... you know what i mean by the plates? i need them removed intact... basically i need the drivers side but if they arent toast..i coud use both.. at the very least they can serve as templates for fabrication... the emblems would be sweet.. i cant find em round here..everything that old was crushed yrs ago

[Pip]

I would be interested in the top and the windshield frame.

[bigdnew]

Windshield frame is cherry. There is absolute no rust and hole that the top brackets bolt to are solid. The tailgate has the one tear some but i believe still solid. i have not been into access panel to check internals but window rolls up and tail gate locks. The two additional holes on the tailgate are for a factory tire rack which i have and is in excellent shape. This truck still had the orginal tailgate emblem. The stainless rails are still with the top and they will go with top along with the three brackets that attach to window frame.

[glimmertwin01]

I could also use the chevrolet tailgate emblem and the handle / lock assembly... and interested in the tire mount for the tailgate ...pics pics pics....
lets see K5 fender emblems, tailgate emblem, rear door glass handle, rear tire mount assmebly, and underside torsion/ rocker box assemblies

[glimmertwin01]

hows the rubber floor covering in the cab area? if it isnt trash i could use that too

[71blksuper4x4]

I will pass on the buckets, but greatly appreciate you taking the time to snap some pics. Shipping will probably be worth quite a bit, but really good price on the buckets. Trevor

[Gary66]

how much for the buckets and console?

[bigdnew]

Originally Posted by Gary66

how much for the buckets and console?

The console is homemade and I'll give it to you if you buy the buckets. The price both buckets is $100.00 and you pay for the ride.

[glimmertwin01]

availability pics and prices on parts requested in posts #12 & 13??

[Adams74Chevy]

grille still available? if so shipping to 21778? what condition are the headlight trim pieces, I would be interested in them as well.

[bigdnew]

Originally Posted by Adams74Chevy

grille still available? if so shipping to 21778? what condition are the headlight trim pieces, I would be interested in them as well.

I will check shipping in the morning. The chrome is pitted on trim pieces, however I just painted the recess. I'll take 20.00 for both.

[bigdnew]

Hey glimmertwin I am going to have to get something a bit more persuasive to get the torque boxes off the truck. The floor mat has one tear as reflected in the pics. I'll take 15.00 for the tailgate emblem. I'll take 15.00 for the door glass handle assembly and 50.00 for the spare tire mount w/ brackets. I'll check on shipping.

[glimmertwin01]

you mean the tear by the passenger side outboard front leg? it seems OK I didnt see pics other than the ones of the seats... Ill take the gate emblem and they door glass handle if it comes with a key so i can remove the lock or just use it... how about the K5 fender emblems..I really need a couple good ones... if you can get a good shot of the rubber floor mat send it... damn shame to cut up the truck...the torque boxes would be sweet but they do take alot of work to remove intact.... could you get a shot of at least the drivers side one?
any help is appreciated ... thanks

[bigdnew]

SOLD dash

SOLD tire mount

40.00 two hooks


15.00 glove box non locking


15.00 dash pad with emblem/ needs restored torn by speaker

SOLD guage assembly / 20,973 on odometer

SOLD rubber floor mat torn by passenger sill plate

[glimmertwin01]

ill take the spare mount too... it swings from the left or right fender? the mat seems fine...so that wasnt a rip around the seat leg? pics of the K5/ Blazer emblems?

[glimmertwin01]

hmmm tow hooks.... LOL i might be interested!

[bigdnew]

alright glimmertwin let's see if we have this right so far.
passenger side swing tire mount 50.00
mat 15.00
door glass crank 15.00
tailgate emblem 15.00

I am going to have to a little research as to how to get the torque boxes off the truck. Also, I am still looking for the fender emblems. What am I missing, oh yeah so you want the tow hooks as well.