FYI: TOW HOOK guide with pics... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 12-01-2006, 09:44 PM

Thought i would do this for fun and maybe someone can learn from this. (isn't that what this board is about?). Anyhow, i believe the 67-68 style actually started around 1960. The 73 style i do not know how long they used that style for. If anyone wants to add part numbers or comments, please do. MODS: feel free to move this if needed. Thanks, Eric

**jerry moss** · 12-02-2006, 12:01 AM

nice collection but i have one slight correction---in the G.M. parts book, the 67-68 hooks are listed as fitting 60-68. i have found them on a 65 one ton at pick-n-pull. i can't say they were original or not but they had been there a long time. just thought i'd throw this in for you junkyard dogs,like me, so you can start checking out the earlier G.M. trucks.

**too much stuff** · 12-02-2006, 12:35 AM

pickmup, Many years of looking and some help from other board members.
Jerry, i wrote that they started around 1960, but don't know for sure. Also on the 67-68 style i have seen them with a 6 digit part number and a 7 digit. I assume the 6 digit would be the early 60's? What does your book show? I have also heard that the 72 extreme bend hooks carry the same part # as the 69-72 style...

Americanrider · 12-02-2006, 02:14 AM

The 73 & up was used through 91. He is one of my old trucks, a 91 Silverado 4x4

msgross · 12-02-2006, 01:13 PM

Here is my set, still in the hands of the PO. His dad was the only owner of the truck, removed them shortly after he bought it and put a monster steel push bumper on. After reading my glove box sticker I noticed that it was an option. Called up the PO and he searched his dads shop, found them and cleaned them up. He is starting a powder coating business and says he is going to ship them to me to put back on his dads truck. I have been waiting for awhile though...(fingers crossed!) They are off of a 68 SWB K-10...

I have seen more pictures of these not installed, than installed. Anyone installation pics to add to the thread? (not trying to steal it away, just add to it)

Americanrider · 12-02-2006, 01:45 PM

As far as I know the 87-9 ?? where all mounted horizontally and stuck out through the plastic air damms. I removed the air damm because you could not fit a chain around the hook.

I would like to bring up the subject of Industrial or Utility tow hooks for the 67-72 trucks. I found a set at a swap meet for $10. (bottom pic is my hooks) When I got them I thought they might be rear hooks but I have found 2 other trucks that show them mounted on the front. I have seen pics if other Rear hooks and the have 3 mounting holes.

The white 69 bus is a Craigslist ad I found and the 4x4 utility was a members truck that sold here on the board a few months back. As a note the seller showed the glove box sheet and tow hooks where not listed?
Any comments? Here is the sale thread:
http://67-72chevytrucks.com/vboard/s...hlight=utility

**burb71** · 12-02-2006, 05:21 PM

Did you guys know that the only way that the factory installed tow hooks was on trucks with painted bumpers, so no CST trucks left the factory with hooks.
For CST and other trucks with chrome bumpers if you wanted tow hooks you had to have them Dealer installed or buy them over the counter and do it yourself.

JUST ADDING TO THE THREAD

**Ironhorse** · 12-02-2006, 06:48 PM

It is my understanding that the hooks in the lower right corner of the picture listed as 73 - ? are the '73 thru '80 style GM hooks. I'm thinking in '81 GM changed to a differant style that mounts to the frame with the hook being at a horizontal position with the hooks facing each other and openings in an air dam to attach tow strap. Used from '81 thru '87 when trucks changed front clip, used also on the Suburbans up thru '91. Guess I need to pull mine off my '91 Burb and get a pic loaded in the computer.

BLAZERMAN · 12-02-2006, 08:02 PM

Heres a little more info for ya, the tow hook option in 1971 cost 19.00, not bad compared to the cost a AM/FM radio the same year 148.55.

The 60 to 68 hooks mounted kinda sideways as they do on todays trucks.
These are the factory hooks on my cousins 63 4x4

Heres a pic of the hooks I just took off an 84 I'm parting out.

msgross · 12-02-2006, 08:07 PM

Quote:

Originally Posted by BLAZERMAN

The 60 to 68 hooks mounted kinda sideways as they do on todays trucks.
These are the factory hooks on my cousins 63 4x4

How in the heck are those mounted in that position? Must be something coming off the frame that they are bolted to, my frame can mount them like that

any more mounting pics would be great...

BLAZERMAN · 12-02-2006, 08:12 PM

Sorry, what I meant to say is they mount that way on the 60 to 66 trucks and not the 67-68. If I rememmber there is a large heavy angled brace that attaches to the frame and is also a support for the bumper. Next time I go over there I'll take some more pics.

**PICKMUP** · 12-02-2006, 09:57 PM

Look what I found today on an old nasty 72 GMC 3\4T truck sitting in a yard next to hwy167 south of Seattle...I just bid $350 for the last set on Ebay and did NOT get them! I did get these for considerably less.

I had to root around in the dirt to get these off, but finally got my hands on a pair.

I don't know what the fascination is with these tow hooks, either,

but I wanted in on it. You always want what you can't have, I guess.

I actually like the looks of the 69-72 hooks better, because they are better balanced. These look like they just stuck two left handers on both sides.
They were listed on the glovebox, but I didn't get the number. I didn't want the owner to think he had something special and jack up the price. I noticed and took pics of the mounting holes...one side is mounted higher than the other, probably because one hook points in toward the frame rail and the other away from it. Part of that, "two lefts make a right" thing, I suppose.

LUV2XCLR8 · 12-02-2006, 10:02 PM

1V7610 - FRONT TOW HOOK

Is what my resto packet gave as a #, but I think it's for all hooks

**too much stuff** · 12-02-2006, 10:40 PM

Nice score pickmup!
Rob, i do have 3 4x4s listed in my sig. (the 70 blazer also) I am set to put 2 sets of hooks on each 4x4 now. HAHA. I used to have a set of the "bendy" mid 80s hooks like your pic, but i couldn't handle the prestige and had to let them go... Actually, i heard those were bent like that on trucks equipped with the front air dam to clear it. A little more info to share...

LUV2XCLR8 · 01-22-2007, 05:58 PM

Quote:

Originally Posted by msgross

I have seen more pictures of these not installed, than installed. Anyone installation pics to add to the thread? (not trying to steal it away, just add to it)

Another pic to add

boundstaffpress · 02-06-2007, 12:32 PM

Not my pics, but I found these while looking here for this info.
Here are pics of some 67-68 hooks installed

boundstaffpress · 02-06-2007, 12:43 PM

Other side of the same hooks compliments of John Fabris

12-01-2006, 09:44 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,698	FYI: TOW HOOK guide with pics... Thought i would do this for fun and maybe someone can learn from this. (isn't that what this board is about?). Anyhow, i believe the 67-68 style actually started around 1960. The 73 style i do not know how long they used that style for. If anyone wants to add part numbers or comments, please do. MODS: feel free to move this if needed. Thanks, Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-02-2006, 12:01 AM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,742	Re: FYI: TOW HOOK guide with pics... nice collection but i have one slight correction---in the G.M. parts book, the 67-68 hooks are listed as fitting 60-68. i have found them on a 65 one ton at pick-n-pull. i can't say they were original or not but they had been there a long time. just thought i'd throw this in for you junkyard dogs,like me, so you can start checking out the earlier G.M. trucks. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-02-2006, 12:35 AM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,698	Re: FYI: TOW HOOK guide with pics... pickmup, Many years of looking and some help from other board members. Jerry, i wrote that they started around 1960, but don't know for sure. Also on the 67-68 style i have seen them with a 6 digit part number and a 7 digit. I assume the 6 digit would be the early 60's? What does your book show? I have also heard that the 72 extreme bend hooks carry the same part # as the 69-72 style... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-02-2006, 02:14 AM	#4
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: FYI: TOW HOOK guide with pics... The 73 & up was used through 91. He is one of my old trucks, a 91 Silverado 4x4 Attached Images

12-02-2006, 01:13 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FYI: TOW HOOK guide with pics... Here is my set, still in the hands of the PO. His dad was the only owner of the truck, removed them shortly after he bought it and put a monster steel push bumper on. After reading my glove box sticker I noticed that it was an option. Called up the PO and he searched his dads shop, found them and cleaned them up. He is starting a powder coating business and says he is going to ship them to me to put back on his dads truck. I have been waiting for awhile though...(fingers crossed!) They are off of a 68 SWB K-10... I have seen more pictures of these not installed, than installed. Anyone installation pics to add to the thread? (not trying to steal it away, just add to it) Attached Images

12-02-2006, 01:45 PM	#6
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: FYI: TOW HOOK guide with pics... As far as I know the 87-9 ?? where all mounted horizontally and stuck out through the plastic air damms. I removed the air damm because you could not fit a chain around the hook. I would like to bring up the subject of Industrial or Utility tow hooks for the 67-72 trucks. I found a set at a swap meet for $10. (bottom pic is my hooks) When I got them I thought they might be rear hooks but I have found 2 other trucks that show them mounted on the front. I have seen pics if other Rear hooks and the have 3 mounting holes. The white 69 bus is a Craigslist ad I found and the 4x4 utility was a members truck that sold here on the board a few months back. As a note the seller showed the glove box sheet and tow hooks where not listed? Any comments? Here is the sale thread: http://67-72chevytrucks.com/vboard/s...hlight=utility Attached Images Last edited by Americanrider; 12-02-2006 at 01:46 PM.

12-02-2006, 05:21 PM	#7
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,711	Re: FYI: TOW HOOK guide with pics... Did you guys know that the only way that the factory installed tow hooks was on trucks with painted bumpers, so no CST trucks left the factory with hooks. For CST and other trucks with chrome bumpers if you wanted tow hooks you had to have them Dealer installed or buy them over the counter and do it yourself. JUST ADDING TO THE THREAD

12-02-2006, 06:48 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,031	Re: FYI: TOW HOOK guide with pics... It is my understanding that the hooks in the lower right corner of the picture listed as 73 - ? are the '73 thru '80 style GM hooks. I'm thinking in '81 GM changed to a differant style that mounts to the frame with the hook being at a horizontal position with the hooks facing each other and openings in an air dam to attach tow strap. Used from '81 thru '87 when trucks changed front clip, used also on the Suburbans up thru '91. Guess I need to pull mine off my '91 Burb and get a pic loaded in the computer. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

12-02-2006, 08:02 PM	#9
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: FYI: TOW HOOK guide with pics... Heres a little more info for ya, the tow hook option in 1971 cost 19.00, not bad compared to the cost a AM/FM radio the same year 148.55. The 60 to 68 hooks mounted kinda sideways as they do on todays trucks. These are the factory hooks on my cousins 63 4x4 Heres a pic of the hooks I just took off an 84 I'm parting out. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-02-2006, 08:12 PM	#11
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: FYI: TOW HOOK guide with pics... Sorry, what I meant to say is they mount that way on the 60 to 66 trucks and not the 67-68. If I rememmber there is a large heavy angled brace that attaches to the frame and is also a support for the bumper. Next time I go over there I'll take some more pics. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-02-2006, 09:57 PM	#12
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,119	Re: FYI: TOW HOOK guide with pics... Look what I found today on an old nasty 72 GMC 3\4T truck sitting in a yard next to hwy167 south of Seattle...I just bid $350 for the last set on Ebay and did NOT get them! I did get these for considerably less. I had to root around in the dirt to get these off, but finally got my hands on a pair. I don't know what the fascination is with these tow hooks, either, but I wanted in on it. You always want what you can't have, I guess. I actually like the looks of the 69-72 hooks better, because they are better balanced. These look like they just stuck two left handers on both sides. They were listed on the glovebox, but I didn't get the number. I didn't want the owner to think he had something special and jack up the price. I noticed and took pics of the mounting holes...one side is mounted higher than the other, probably because one hook points in toward the frame rail and the other away from it. Part of that, "two lefts make a right" thing, I suppose. Attached Images

12-02-2006, 10:02 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: FYI: TOW HOOK guide with pics... 1V7610 - FRONT TOW HOOK Is what my resto packet gave as a #, but I think it's for all hooks __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-02-2006, 10:40 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,698	Re: FYI: TOW HOOK guide with pics... Nice score pickmup! Rob, i do have 3 4x4s listed in my sig. (the 70 blazer also) I am set to put 2 sets of hooks on each 4x4 now. HAHA. I used to have a set of the "bendy" mid 80s hooks like your pic, but i couldn't handle the prestige and had to let them go... Actually, i heard those were bent like that on trucks equipped with the front air dam to clear it. A little more info to share... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-06-2007, 12:32 PM	#16
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: FYI: TOW HOOK guide with pics... Not my pics, but I found these while looking here for this info. Here are pics of some 67-68 hooks installed Attached Images __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis Last edited by boundstaffpress; 02-06-2007 at 12:37 PM.

02-06-2007, 12:43 PM	#17
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: FYI: TOW HOOK guide with pics... Other side of the same hooks compliments of John Fabris Attached Images __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.