1963 GMC C30 panel truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62stepside longbox · 01-13-2016, 11:58 AM

Nice job on the gauges. What are they from?

AJCK87 · 01-13-2016, 12:34 PM

Quote:

Originally Posted by 62stepside longbox

Nice job on the gauges. What are they from?

Thanks! That are out of a 1992 Dodge 3/4 ton, went with them because I have them on hand and I will be using the Dodge wiring harness. The harness will just plug right in!

**TJ's Chevy** · 01-13-2016, 01:12 PM

Liking that gauge cluster!

62stepside longbox · 02-05-2016, 12:47 AM

Any updates on this?

AJCK87 · 02-05-2016, 02:13 PM

Quote:

Originally Posted by 62stepside longbox

Any updates on this?

I have been working on wiring up the last tail tight with the LED board. Just on my way back from Vancouver with some parts I picked up at KMS tools. I got the inside front fender support patch panels for both the front fenders, hoping to get to those in the next few weeks. Also got some backing plates for the rocker fix. That is the plan for this next week, got time off and going down tomorrow. I hope to get the rear bumper mounted, both rockers repaired and some sheet metal repairs done. Also scored a used Crome front bumper, hopefully the right year this time hahahah. Updates to come

AJCK87 · 02-07-2016, 01:17 PM

Down island for the week, time to get some tasks knocked out! First things first, I just had to see how the gauge cluster looked in the dash.

AJCK87 · 02-07-2016, 01:22 PM

Next on the list for the dash. I figure I would install the "wait to start" indicator in the ash tray opening.

01-13-2016, 11:58 AM	#1
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: 1963 GMC C30 panel truck Nice job on the gauges. What are they from? __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

01-13-2016, 01:12 PM	#3
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1963 GMC C30 panel truck Liking that gauge cluster! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

02-05-2016, 12:47 AM	#4
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: 1963 GMC C30 panel truck Any updates on this? __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

02-07-2016, 01:17 PM	#6
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck Down island for the week, time to get some tasks knocked out! First things first, I just had to see how the gauge cluster looked in the dash. Attached Images

02-07-2016, 01:22 PM	#7
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck Next on the list for the dash. I figure I would install the "wait to start" indicator in the ash tray opening. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.