What did you get done? 3/11/07 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffspower · 03-12-2007, 12:17 AM

Since these seats won't fit in my '88 Ext. cab worth a darn, I think I'll use them in my '72. I can't believe the cab's interior width is bigger on the '72. the wide trans hump was the big problem on the '88.

DangerBoy · 03-12-2007, 12:21 AM

Tracked down my nasty oil leak to the back of my passenger side head. Tore it down and got it runnin again today. Tune it up tomorrow and drive. Hopefully leak is gone.

**SactoJim** · 03-12-2007, 12:35 AM

Big weekend for me!

There's some milestones when building one of these things......truck painted, all panels back on, first motor firing, and the first little cruise around the parking lot!

It's moving under it's own power and this thing will fry the tires on demand!!!....gonna take a surgeon to remove the smile from my face!!

....or at least until the front crank seal gave way and spit oil all over!!...PISS!!

Oh well....it's was a pretty easy fix, but just made a mess.

This pic is the first time this thing has moved on it's own power since 97!

IvelDesigns · 03-12-2007, 12:37 AM

Quote:

Originally Posted by SactoJim

Big weekend for me!

There's some milestones when building one of these things......truck painted, all panels back on, first motor firing, and the first little cruise around the parking lot!

It's moving under it's own power and this thing will fry the tires on demand!!!....gonna take a surgeon to remove the smile from my face!!

....or at least until the front crank seal gave way and spit oil all over!!...PISS!!

Oh well....it's was a pretty easy fix, but just made a mess.

This pic is the first time this thing has moved on it's own power since 97!

awesome man. always good to see another one on the road again in all its glory.

BowTieOgre · 03-12-2007, 01:00 AM

Finally got my truck rolling around on tires again. Next weekend is steering, lines and fuel cell.

mudpuppie · 03-12-2007, 06:09 AM

sandblasted front part of the old frame , primed and paint. now i can set my engine back on it .... its been a long time .... , help a friend sand some floors in a old house he is flipping

70396CST10 · 03-12-2007, 07:11 AM

Installed a new dome light assembly from Christian's Classics.. Thanks Tim..
Fixed my fuel gauge problem by installing a new Resistor, Thanks Randy
Removed some Highschool crappy wiring someone had done to the truck..
Removed four 6x9 speakers from the doors.. Who would do such a bad thing to these doors..

Put some new valve cover gaskets on the ole 396

I had a very successful weekend with the truck.. Everything went smooth..

Zumo · 03-12-2007, 09:10 AM

I cleared out the other side of my garage and rolled the truck inside. Trying to keep it out of the elements and out of site from would be theifs. I put in a newer seat and still need to olt it down. I am also going to install a new tach so I don't want folks swipin' my sh!t.

**FRENCHBLUE72** · 03-12-2007, 09:22 AM

Nothing so I took today off to get work on the truck done....

RustyParts · 03-12-2007, 09:57 AM

Got my repaired floorboards painted.

**Yukon Jack** · 03-12-2007, 10:03 AM

Congrats SactoJim on the first drive since 97!

Looks like alot of progress amongst us.

This weekend I got to work on my 70 K5 on Sunday. Got the transmission bolts all tightened, got the bellhousing cover installed. Got the power steering pump installed along with the alternator. So very little left to do before I can go for a drive for the first time in the K5!

Alvin · 03-12-2007, 10:05 AM

Got a few coats of primer on the top of my frame. Tonight we'll flip it over and put a few on the bottom. Hopefully tomorrow we'll be spraying black!

1fast71 · 03-12-2007, 04:16 PM

lets c i pulled my back bumper off it was one of those Tuff diamond plate work bumpers and mounted my licence plate under the tailgate along with the licence plate light. washed it and did some doughnuts lol

bobthecop · 03-12-2007, 04:24 PM

Got my 3/4 ton chassis home, now comes the fun.

timcos · 03-12-2007, 04:26 PM

LED taillights installed from Musclerodz.

Old bent up license plate frame removed. New one in wings.

1fast71 · 03-12-2007, 04:31 PM

o yeah and put new windsheild wiperblades on it

LUV2XCLR8 · 03-12-2007, 04:33 PM

Got a whole lot done working on marking my property* lines.

*Hope to install razor wire, I mean barb wire fencing this fall

meathead95 · 03-12-2007, 04:56 PM

i put a new engine in my k20

manimal · 03-13-2007, 12:06 AM

Started building my 9' BBQ. Built the trailer out of 2x4x.188 tubing. It's 12' long. Hopefully I'll have it done in a couple of weeks so I can start catering. I have pics,but they are on my phone and dont know how to get to 'puter?
-Lance

GREASEMONKEY72 · 03-13-2007, 03:01 AM

friday night me and my loaded up a 79 el rancho to haul to ridgecrest which is 1 1/2 hours from here, drove up saturday morning unloaded the car then went and helped work on a rc track for a while and hung with friends then sunday went rc racing and hung out with friends more then drove home sunday night(thats the short version)

TRUCKER-TRUCKIN' · 03-13-2007, 05:00 AM

That seafoam stuff is great if you get something used but i use lucas fuel treatment every oil change and things seem to stay pretty well cleaned out, just my .02

03-12-2007, 12:17 AM	#26
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: What did you get done? 3/11/07 Since these seats won't fit in my '88 Ext. cab worth a darn, I think I'll use them in my '72. I can't believe the cab's interior width is bigger on the '72. the wide trans hump was the big problem on the '88. Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

03-12-2007, 12:21 AM	#27
DangerBoy Registered User Join Date: Nov 2005 Location: Springville, Ca Posts: 270	Re: What did you get done? 3/11/07 Tracked down my nasty oil leak to the back of my passenger side head. Tore it down and got it runnin again today. Tune it up tomorrow and drive. Hopefully leak is gone. __________________ 2002 S10 ZR2 for the dirt. 1968 C10 shorty for the street. She said the truck would be the end of us. I still have the truck!

03-12-2007, 12:35 AM	#28
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: What did you get done? 3/11/07 Big weekend for me! There's some milestones when building one of these things......truck painted, all panels back on, first motor firing, and the first little cruise around the parking lot! It's moving under it's own power and this thing will fry the tires on demand!!!....gonna take a surgeon to remove the smile from my face!! ....or at least until the front crank seal gave way and spit oil all over!!...PISS!! Oh well....it's was a pretty easy fix, but just made a mess. This pic is the first time this thing has moved on it's own power since 97! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread Last edited by SactoJim; 10-04-2007 at 05:21 PM.

03-12-2007, 01:00 AM	#30
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: What did you get done? 3/11/07 Finally got my truck rolling around on tires again. Next weekend is steering, lines and fuel cell. Attached Images __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

03-12-2007, 06:09 AM	#31
mudpuppie Registered User Join Date: Nov 2005 Location: Virginia Posts: 51	Re: What did you get done? 3/11/07 sandblasted front part of the old frame , primed and paint. now i can set my engine back on it .... its been a long time .... , help a friend sand some floors in a old house he is flipping

03-12-2007, 07:11 AM	#32
70396CST10 Registered User Join Date: Feb 2007 Location: Westminster, SC Posts: 50	Re: What did you get done? 3/11/07 Installed a new dome light assembly from Christian's Classics.. Thanks Tim.. Fixed my fuel gauge problem by installing a new Resistor, Thanks Randy Removed some Highschool crappy wiring someone had done to the truck.. Removed four 6x9 speakers from the doors.. Who would do such a bad thing to these doors.. Put some new valve cover gaskets on the ole 396 I had a very successful weekend with the truck.. Everything went smooth..

03-12-2007, 09:10 AM	#33
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: What did you get done? 3/11/07 I cleared out the other side of my garage and rolled the truck inside. Trying to keep it out of the elements and out of site from would be theifs. I put in a newer seat and still need to olt it down. I am also going to install a new tach so I don't want folks swipin' my sh!t. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

03-12-2007, 09:22 AM	#34
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: What did you get done? 3/11/07 Nothing so I took today off to get work on the truck done.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-12-2007, 09:57 AM	#35
RustyParts Registered User Join Date: May 2006 Location: Wyman, Kentucky Posts: 403	Re: What did you get done? 3/11/07 Got my repaired floorboards painted. Attached Images __________________ 1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers!

03-12-2007, 10:03 AM	#36
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: What did you get done? 3/11/07 Congrats SactoJim on the first drive since 97! Looks like alot of progress amongst us. This weekend I got to work on my 70 K5 on Sunday. Got the transmission bolts all tightened, got the bellhousing cover installed. Got the power steering pump installed along with the alternator. So very little left to do before I can go for a drive for the first time in the K5! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-12-2007, 10:05 AM	#37
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: What did you get done? 3/11/07 Got a few coats of primer on the top of my frame. Tonight we'll flip it over and put a few on the bottom. Hopefully tomorrow we'll be spraying black! __________________ Ethel - The Legend Continues... Ethel has been sold.

03-12-2007, 04:16 PM	#38
1fast71 Registered User Join Date: Dec 2006 Location: medford oregon Posts: 152	Re: What did you get done? 3/11/07 lets c i pulled my back bumper off it was one of those Tuff diamond plate work bumpers and mounted my licence plate under the tailgate along with the licence plate light. washed it and did some doughnuts lol

03-12-2007, 04:24 PM	#39
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: What did you get done? 3/11/07 Got my 3/4 ton chassis home, now comes the fun. __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car)

03-12-2007, 04:26 PM	#40
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: What did you get done? 3/11/07 LED taillights installed from Musclerodz. Old bent up license plate frame removed. New one in wings. __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

03-12-2007, 04:31 PM	#41
1fast71 Registered User Join Date: Dec 2006 Location: medford oregon Posts: 152	Re: What did you get done? 3/11/07 o yeah and put new windsheild wiperblades on it



Register or Log In To remove these advertisements.

03-12-2007, 04:33 PM	#42
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: What did you get done? 3/11/07 Got a whole lot done working on marking my property* lines. *Hope to install razor wire, I mean barb wire fencing this fall __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-12-2007, 04:56 PM	#43
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: What did you get done? 3/11/07 i put a new engine in my k20 __________________ 72 2wd blazer 72 swb 4x4

03-13-2007, 12:06 AM	#44
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: What did you get done? 3/11/07 Started building my 9' BBQ. Built the trailer out of 2x4x.188 tubing. It's 12' long. Hopefully I'll have it done in a couple of weeks so I can start catering. I have pics,but they are on my phone and dont know how to get to 'puter? -Lance

03-13-2007, 03:01 AM	#45
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: What did you get done? 3/11/07 friday night me and my loaded up a 79 el rancho to haul to ridgecrest which is 1 1/2 hours from here, drove up saturday morning unloaded the car then went and helped work on a rc track for a while and hung with friends then sunday went rc racing and hung out with friends more then drove home sunday night(thats the short version) __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

03-13-2007, 05:00 AM	#46
TRUCKER-TRUCKIN' Rally Wheel Club Join Date: Jan 2007 Location: Billings,MO Posts: 97	Re: What did you get done? 3/11/07 That seafoam stuff is great if you get something used but i use lucas fuel treatment every oil change and things seem to stay pretty well cleaned out, just my .02

Register or Log In To remove these advertisements.