Square body extended cabs - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rare86 · 06-19-2010, 09:04 AM

Good news, cant wait to see it.

RandyP · 06-21-2010, 10:44 AM

Ran across this on another site, thought you might get the info on the truck for your collection. Sorry if you're already aware of it, scanned the last two pages and did not see it anywhere. *Not my truck, not even remotely close to me*

http://grandrapids.craigslist.org/cto/1789926177.html

Quote:

I have a 1986 chevyrolet Silverado 2wd extended cab! has a 305 auto trans RUNS !! it custom interior. has lots of rust on the body! but its very reliable engine is not oriiginal enigne and trans only has 39XXX miles on it.body i have no idea! im wiling to sel for 1000 firm ...not in ANY hurry to sell im doing body work to it righ now.just got done putting in a new window in.im gona do a cheap paint job to it wen the body work is done.probably flat black. im posting to see what i can get for it.if i like the offers i wil sell.call/text 16162501088
NO EMAILS!im sick of spam!

chevyboy78 · 02-28-2015, 03:06 AM

Quote:

Originally Posted by RandyP

Ran across this on another site, thought you might get the info on the truck for your collection. Sorry if you're already aware of it, scanned the last two pages and did not see it anywhere. *Not my truck, not even remotely close to me*

http://grandrapids.craigslist.org/cto/1789926177.html

Im just looking on here and I do see this was a few years ago but has anyone ran accross a extended cab Chevy im looking for a cab and frame. Any one with info on one welcome to text me 2629093017

wiggins · 07-02-2010, 12:11 PM

Here are the pics of my console GMT, hope they help. Hey I noticed you are from Norway, I own a 1928 Pontiac Phaeton that was shipped to the USA from Norway years ago. Theses cars were far more popular in Europe in the 20's so many more of them still survive over there. In fact the car still has tire on it that were made in Norway"Viking Eckstra" tires. Anyway if you spot any parts cars or parts for one of these I would appreciate the info, thanks Wiggins
I am also including some pics of my rear seat, it is covered in sanding dust but you can get the idea of location ect..

wiggins · 07-02-2010, 12:14 PM

some more !!!!

LOW1TON · 07-02-2010, 02:20 PM

There has been an extended cab dually on EBAY for the last few weeks I believe it is an 86, If you go to Ebay motors and search "chevrolet dually" it will come up. Not a bad looking truck

DBLSPRT68 · 07-13-2010, 09:51 PM

Well guys, here is another one SAVED. It had been under a tree in Arkansas for the past year or more. I knew I wanted this thing. After talking to the owner and mentioned the asking price, I HAD TO HAVE IT! $1000.00 later and it's in my yard right now. Plans are for a winter project body/bed swap to my 3/4T 2wd frame with a new 350/th400 14bFF combo. I've never been a fan of red, so will probably go with Black/grey with Charcoal interior. Same as my current truck. Bench seat will go away, and I have one of those aftermarket bucket seat folding armrest console set-ups to go in. This is as bought, except for a spray wash on the way out of town. David

engineco713 · 08-23-2010, 06:25 PM

Quote:

Originally Posted by DBLSPRT68

Well guys, here is another one SAVED. It had been under a tree in Arkansas for the past year or more. I knew I wanted this thing. After talking to the owner and mentioned the asking price, I HAD TO HAVE IT! $1000.00 later and it's in my yard right now. Plans are for a winter project body/bed swap to my 3/4T 2wd frame with a new 350/th400 14bFF combo. I've never been a fan of red, so will probably go with Black/grey with Charcoal interior. Same as my current truck. Bench seat will go away, and I have one of those aftermarket bucket seat folding armrest console set-ups to go in. This is as bought, except for a spray wash on the way out of town. David

*BGRAFX* · 07-13-2010, 10:00 PM

Good score!

rare86 · 07-15-2010, 10:56 PM

Definately a good score. Does it have the CVI tag in the frivers door jam?

*87 chevy silverado* · 07-16-2010, 02:53 AM

that is kool

wiggins · 07-24-2010, 11:59 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

wiggins · 08-06-2010, 10:13 AM

WOW, had no idea that you had to pay extra to be able to post something for sale, crazy! I always thought that the "premium member" ect next to peoples names had to do with how long and how active they had been with this forum. My mistake.

Quote:

Originally Posted by wiggins

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

rare86 · 08-20-2010, 09:22 PM

I finally got no 4 home and am real excited about this project. I have only found 4, 3/4 ton 4wds and this is the only ex cab I have ever seen that had a 4 speed. The frame was streteched for the full size bed and came with a 90 suburban front clip. I am kind of at a loss as to what route to go with this one. I want it black and it will have a bigblock, but other than that, I am undecided. Im torn between a dually, leaving it lifted and running 38s or dropping it down a bit and go for more of a stock look. In its prime it was running 44s and looked killer, but that was with the shortened bed. It looks retarded now with the small tires on it, but for the price, I didnt care. I traded a truck that I had that was given to me, so I guess you could say it was free. The first pic is with the sleeper that the previous owner wanted to keep, so I greatly obliged him in the removel of it. I'll get better pics when weather permits

Tex_50613 · 11-21-2011, 08:29 PM

Quote:

Originally Posted by rare86

I finally got no 4 home and am real excited about this project. I have only found 4, 3/4 ton 4wds and this is the only ex cab I have ever seen that had a 4 speed. The frame was streteched for the full size bed and came with a 90 suburban front clip. I am kind of at a loss as to what route to go with this one. I want it black and it will have a bigblock, but other than that, I am undecided. Im torn between a dually, leaving it lifted and running 38s or dropping it down a bit and go for more of a stock look. In its prime it was running 44s and looked killer, but that was with the shortened bed. It looks retarded now with the small tires on it, but for the price, I didnt care. I traded a truck that I had that was given to me, so I guess you could say it was free. The first pic is with the sleeper that the previous owner wanted to keep, so I greatly obliged him in the removel of it. I'll get better pics when weather permits

that's hot, well to me anyway, the only ex'cab I ever saw in person other than a couple ex'ccdrw was set up this way, 3/4 ton longbox, 6" lift, 36's, 400sbc, SM465, np208, and I couldn't come up with the $3800 the guy wanted for it which sucked at 18

Mr Pops · 11-22-2011, 02:24 PM

I wish someone would make a squarebody extended cab that had rear side windows that matched the lines of the front side windows..

*BGRAFX* · 08-20-2010, 09:35 PM

That's kinda weird lookin, probably just the wheels, brown building in background the height of the multi colored body. Lol
I bet painted all black slammed over big dually wheels would look cool

rare86 · 08-20-2010, 09:37 PM

it does look retarded because of the smaller tires and 6 inch lift, but for the price, I didnt care.

DBLSPRT68 · 08-20-2010, 10:20 PM

Very Cool Indeed!!!!!!! I will be starting the body swap on mine very soon. Mine was originally a half ton 2wd, I'm putting the body on my 3/4t 2wd frame. David

rare86 · 08-20-2010, 11:17 PM

Im anxious to see the build on yours DBLSPRT68

bucannon · 08-20-2010, 11:31 PM

keep the lift on that bad boy and run some super swampers it will look like a beast

1985-GMC · 08-21-2010, 01:56 AM

It would look awesome as a lifted dually with some good sized mud grips on it!

How about this:

GmtGmt · 08-21-2010, 09:40 AM

hmmm

1985-GMC · 08-21-2010, 01:49 PM

LOL

rare86 · 08-21-2010, 08:59 AM

I havent seen the silver one before,I love it. Do you have anymore pics or info on it? That is kinda what Id like to do, but nut sure how to pull it off with a 3/4 ton. I can probably find a dually rearend, but a front is gonna be hard to find around here. Adapters???

06-19-2010, 09:04 AM	#1
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: Square body extended cabs Good news, cant wait to see it. __________________ If it has a motor, it has my attention.

07-02-2010, 12:11 PM	#4
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: Square body extended cabs Here are the pics of my console GMT, hope they help. Hey I noticed you are from Norway, I own a 1928 Pontiac Phaeton that was shipped to the USA from Norway years ago. Theses cars were far more popular in Europe in the 20's so many more of them still survive over there. In fact the car still has tire on it that were made in Norway"Viking Eckstra" tires. Anyway if you spot any parts cars or parts for one of these I would appreciate the info, thanks Wiggins I am also including some pics of my rear seat, it is covered in sanding dust but you can get the idea of location ect.. Attached Images __________________ Preserving American History one truck at a time.

07-02-2010, 12:14 PM	#5
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: Square body extended cabs some more !!!! Attached Images __________________ Preserving American History one truck at a time.

07-02-2010, 02:20 PM	#6
LOW1TON Registered User Join Date: Jan 2010 Location: BRISTOW OKLAHOMA Posts: 247	Re: Square body extended cabs There has been an extended cab dually on EBAY for the last few weeks I believe it is an 86, If you go to Ebay motors and search "chevrolet dually" it will come up. Not a bad looking truck __________________ "WIDER IS BETTER" (TRUCKS ONLY)

07-13-2010, 09:51 PM	#7
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: Square body extended cabs Well guys, here is another one SAVED. It had been under a tree in Arkansas for the past year or more. I knew I wanted this thing. After talking to the owner and mentioned the asking price, I HAD TO HAVE IT! $1000.00 later and it's in my yard right now. Plans are for a winter project body/bed swap to my 3/4T 2wd frame with a new 350/th400 14bFF combo. I've never been a fan of red, so will probably go with Black/grey with Charcoal interior. Same as my current truck. Bench seat will go away, and I have one of those aftermarket bucket seat folding armrest console set-ups to go in. This is as bought, except for a spray wash on the way out of town. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

07-13-2010, 10:00 PM	#9
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Square body extended cabs Good score!

07-15-2010, 10:56 PM	#10
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: Square body extended cabs Definately a good score. Does it have the CVI tag in the frivers door jam? __________________ If it has a motor, it has my attention. Last edited by rare86; 07-15-2010 at 10:57 PM.

07-16-2010, 02:53 AM	#11
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Square body extended cabs that is kool

07-24-2010, 11:59 PM	#12
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: Square body extended cabs Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ Preserving American History one truck at a time. Last edited by old Rusty C10; 07-25-2010 at 10:54 AM.

08-20-2010, 09:22 PM	#14
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: Square body extended cabs I finally got no 4 home and am real excited about this project. I have only found 4, 3/4 ton 4wds and this is the only ex cab I have ever seen that had a 4 speed. The frame was streteched for the full size bed and came with a 90 suburban front clip. I am kind of at a loss as to what route to go with this one. I want it black and it will have a bigblock, but other than that, I am undecided. Im torn between a dually, leaving it lifted and running 38s or dropping it down a bit and go for more of a stock look. In its prime it was running 44s and looked killer, but that was with the shortened bed. It looks retarded now with the small tires on it, but for the price, I didnt care. I traded a truck that I had that was given to me, so I guess you could say it was free. The first pic is with the sleeper that the previous owner wanted to keep, so I greatly obliged him in the removel of it. I'll get better pics when weather permits Attached Images __________________ If it has a motor, it has my attention.

11-22-2011, 02:24 PM	#16
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: Square body extended cabs I wish someone would make a squarebody extended cab that had rear side windows that matched the lines of the front side windows.. Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

08-20-2010, 09:35 PM	#17
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Square body extended cabs That's kinda weird lookin, probably just the wheels, brown building in background the height of the multi colored body. Lol I bet painted all black slammed over big dually wheels would look cool

08-20-2010, 09:37 PM	#18
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: Square body extended cabs it does look retarded because of the smaller tires and 6 inch lift, but for the price, I didnt care. __________________ If it has a motor, it has my attention. Last edited by rare86; 08-20-2010 at 09:38 PM.

08-20-2010, 10:20 PM	#19
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: Square body extended cabs Very Cool Indeed!!!!!!! I will be starting the body swap on mine very soon. Mine was originally a half ton 2wd, I'm putting the body on my 3/4t 2wd frame. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

08-20-2010, 11:17 PM	#20
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: Square body extended cabs Im anxious to see the build on yours DBLSPRT68 __________________ If it has a motor, it has my attention.



Register or Log In To remove these advertisements.

08-20-2010, 11:31 PM	#21
bucannon Salty Sailor Join Date: May 2009 Location: Savannah, Ga Posts: 603	Re: Square body extended cabs keep the lift on that bad boy and run some super swampers it will look like a beast __________________ 86 c-10 Custom Deluxe Savannah, Georgia

08-21-2010, 01:56 AM	#22
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Square body extended cabs It would look awesome as a lifted dually with some good sized mud grips on it! How about this: Attached Images __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress) Last edited by 1985-GMC; 08-21-2010 at 02:44 AM.

08-21-2010, 01:49 PM	#24
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Square body extended cabs LOL __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

08-21-2010, 08:59 AM	#25
rare86 Extended cab fanatic Join Date: Oct 2009 Location: Gardendale, Tx Posts: 314	Re: Square body extended cabs I havent seen the silver one before,I love it. Do you have anymore pics or info on it? That is kinda what Id like to do, but nut sure how to pull it off with a 3/4 ton. I can probably find a dually rearend, but a front is gonna be hard to find around here. Adapters??? __________________ If it has a motor, it has my attention.

Register or Log In To remove these advertisements.