project 62 - Page 37 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JohnC · 03-09-2013, 04:17 PM

Those are indeed scary doctor's visits, but make for fun times later on

Posted via Mobile Device

mcbassin · 06-18-2013, 03:20 PM

What's up Scott? TTT

scotts62 · 06-19-2013, 09:56 AM

Hey Mike, um notta whole lot.... i need to work on this dude because then the side work will flow again, never fails

scotts62 · 12-09-2013, 08:32 PM

Well if i keep at it like i am then ill have quite a few pics to show off..

**Captainfab** · 12-10-2013, 01:17 AM

That's good to hear......I was beginning to think you had abandoned us over here.

scotts62 · 12-10-2013, 10:57 AM

Quote:

Originally Posted by Captainfab

That's good to hear......I was beginning to think you had abandoned us over here.

Haha no not quite, the whole life and priorities thing keep getting in the way

scotts62 · 12-20-2013, 06:41 PM

Well i got a thought by looking at them like this and figured i could make it look a little cleaner than zip ties to frames that i have seen rolling around here

Made a manifold to cut down on all the lines

Not Completed but you get the idea

Also mocked up the radiator and air cleaner so that i can fit it all under the hood and build a core support

scotts62 · 12-20-2013, 06:51 PM

Got ahold of a complete 6.0 that pushed out a cam bearing (apparently not uncommon for) Checked the block and it was not hurt so im going to use a dab of Loctite on some durabonds and go with it. My helpers lending a hand tearing it down.

**TJ's Chevy** · 12-20-2013, 06:53 PM

Just read through yer build thread. MAN! Wish I joined this club on 2009!!! I missed out on some comical conversation!

Nice build and keep up the good work!

scotts62 · 12-20-2013, 06:59 PM

Got started on the core support and its going to turn out like i am hoping it will. Here is the bender i made in action on one of the frame to core support brace. Ill post more when it makes more sense to others

Crooked $30 piece of metal that i hope works out

scotts62 · 12-20-2013, 07:00 PM

Quote:

Originally Posted by T.J. MCCAULEY

Just read through yer build thread. MAN! Wish I joined this club on 2009!!! I missed out on some comical conversation!

Nice build and keep up the good work!

Yeah we get off topic a little but oh well it adds character

**TJ's Chevy** · 12-20-2013, 07:05 PM

Quote:

Originally Posted by scotts62

Yeah we get off topic a little but oh well it adds character

Gotta have fun right!

mcbassin · 12-20-2013, 08:33 PM

Very nice progress Scott!

scotts62 · 12-20-2013, 10:31 PM

Thanks Mike, thanks again for the help with the tank!

scotts62 · 12-22-2013, 03:08 PM

Used some plastic line around the shop and hooked air up to try the valves out just using the fancy way of touching wires together but it worked

Going to run stainless line to everything later.

Alan's Classic · 12-22-2013, 08:33 PM

Cool!! Progress no matter which way you look at it.

67c10rustbuket · 12-22-2013, 09:28 PM

I always liked the SMC diaphragm valves and the box should keep it all neat. Much faster than the fancy stuff but quite a bit of plumbing. Make sure to keep moisture out of them when it's cold outside. One truck I had with those mounted under the bed would freeze/stick when below freezing because it didn't have a water seperator. Several times I had to wait for the exhaust to warm up the tank and valves to work properly. Sold it before I fixed that problem. Not the smartest thing to drive in the snow anyways...

scotts62 · 12-22-2013, 10:44 PM

Quote:

Originally Posted by 67c10rustbuket

I always liked the SMC diaphragm valves and the box should keep it all neat. Much faster than the fancy stuff but quite a bit of plumbing. Make sure to keep moisture out of them when it's cold outside. One truck I had with those mounted under the bed would freeze/stick when below freezing because it didn't have a water seperator. Several times I had to wait for the exhaust to warm up the tank and valves to work properly. Sold it before I fixed that problem. Not the smartest thing to drive in the snow anyways...

I have a couple driers/filter and a separator that is going before the tank and another after it to the valve box as you could say so i think that part will be ok. And as far as freezing up i dont think it will do that in the garage during the winter

JohnC · 12-24-2013, 07:29 PM

Looking good man!

mcbassin · 12-24-2013, 07:57 PM

Nice work Scott. I'm looking forward to the custom core support coming together.

scotts62 · 12-25-2013, 01:41 PM

Quote:

Originally Posted by mcbassin

Nice work Scott. I'm looking forward to the custom core support coming together.

Yeah me too. I got the rear going my way (well i think) just not pic worthy yet... Soon though very soon.

scotts62 · 12-27-2013, 12:07 AM

It got some fresh air tonight

scotts62 · 12-29-2013, 02:36 PM

Bent some pieces for the wish bone, the 180 degree was just a test piece with the bender

Just tacked up and sitting but you get the idea. Hope to get out there in a bit and try and finish it up but we'll see.

Did 4 of these to mount the battery and valve box, everything is tacked in right now and will weld up once the body parts come off for the frame to be done.

It was a nice day yesterday to get it out and work on it some

mcbassin · 12-29-2013, 04:53 PM

Very good progress Scott. It looks like you're focused now.

scotts62 · 12-29-2013, 05:54 PM

Quote:

Originally Posted by mcbassin

Very good progress Scott. It looks like you're focused now.

Thanks Mike, yeah im starting to see some progress and it come along so i better keep the fire rolling

03-09-2013, 04:17 PM	#901
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 Those are indeed scary doctor's visits, but make for fun times later on Posted via Mobile Device

06-18-2013, 03:20 PM	#902
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project 62 What's up Scott? TTT __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

06-19-2013, 09:56 AM	#903
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Hey Mike, um notta whole lot.... i need to work on this dude because then the side work will flow again, never fails __________________ Scott 93 crew cab build Project 62

12-09-2013, 08:32 PM	#904
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Well if i keep at it like i am then ill have quite a few pics to show off.. __________________ Scott 93 crew cab build Project 62

12-10-2013, 01:17 AM	#905
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: project 62 That's good to hear......I was beginning to think you had abandoned us over here. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-20-2013, 06:41 PM	#907
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Well i got a thought by looking at them like this and figured i could make it look a little cleaner than zip ties to frames that i have seen rolling around here Made a manifold to cut down on all the lines Not Completed but you get the idea Also mocked up the radiator and air cleaner so that i can fit it all under the hood and build a core support __________________ Scott 93 crew cab build Project 62

12-20-2013, 06:51 PM	#908
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Got ahold of a complete 6.0 that pushed out a cam bearing (apparently not uncommon for) Checked the block and it was not hurt so im going to use a dab of Loctite on some durabonds and go with it. My helpers lending a hand tearing it down. __________________ Scott 93 crew cab build Project 62

12-20-2013, 06:53 PM	#909
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: project 62 Just read through yer build thread. MAN! Wish I joined this club on 2009!!! I missed out on some comical conversation! Nice build and keep up the good work! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-20-2013, 06:59 PM	#910
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Got started on the core support and its going to turn out like i am hoping it will. Here is the bender i made in action on one of the frame to core support brace. Ill post more when it makes more sense to others Crooked $30 piece of metal that i hope works out __________________ Scott 93 crew cab build Project 62

12-20-2013, 08:33 PM	#913
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project 62 Very nice progress Scott! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-20-2013, 10:31 PM	#914
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Thanks Mike, thanks again for the help with the tank! __________________ Scott 93 crew cab build Project 62

12-22-2013, 03:08 PM	#915
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Used some plastic line around the shop and hooked air up to try the valves out just using the fancy way of touching wires together but it worked Going to run stainless line to everything later. __________________ Scott 93 crew cab build Project 62

12-22-2013, 08:33 PM	#916
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: project 62 Cool!! Progress no matter which way you look at it. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

12-22-2013, 09:28 PM	#917
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,807	Re: project 62 I always liked the SMC diaphragm valves and the box should keep it all neat. Much faster than the fancy stuff but quite a bit of plumbing. Make sure to keep moisture out of them when it's cold outside. One truck I had with those mounted under the bed would freeze/stick when below freezing because it didn't have a water seperator. Several times I had to wait for the exhaust to warm up the tank and valves to work properly. Sold it before I fixed that problem. Not the smartest thing to drive in the snow anyways... __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-24-2013, 07:29 PM	#919
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 Looking good man!



Register or Log In To remove these advertisements.

12-24-2013, 07:57 PM	#920
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project 62 Nice work Scott. I'm looking forward to the custom core support coming together. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-27-2013, 12:07 AM	#922
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 It got some fresh air tonight __________________ Scott 93 crew cab build Project 62

12-29-2013, 02:36 PM	#923
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Bent some pieces for the wish bone, the 180 degree was just a test piece with the bender Just tacked up and sitting but you get the idea. Hope to get out there in a bit and try and finish it up but we'll see. Did 4 of these to mount the battery and valve box, everything is tacked in right now and will weld up once the body parts come off for the frame to be done. It was a nice day yesterday to get it out and work on it some __________________ Scott 93 crew cab build Project 62

12-29-2013, 04:53 PM	#924
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project 62 Very good progress Scott. It looks like you're focused now. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.