MO Just brought in a 70 C10, what you need??? - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chev-obsession** · 04-01-2020, 12:33 AM

Quote:

Originally Posted by 68Gold/white

Fred,
I am sending check for manual steer box, including pitman arm (75.00), antenna (20.00) these are on this thread, and in other thread shift indicator (15.00). Will send one check for all $110.00
THanks
Jeff

I sent Fred a Pm on the antennae and some other parts I have inquired about and haven’t heard back from him....

68Gold/white · 04-01-2020, 09:58 AM

Quote:

Originally Posted by chev-obsession

i sent fred a pm on the antennae and some other parts i have inquired about and haven’t heard back from him....

ok

John H. · 04-02-2020, 10:39 PM

Hi Fred,

Any thoughts on the Rubber pedals and stainless?

Ebrake, brake and accelerator pedal & stainless

**4x41971SWB** · 04-02-2020, 11:11 PM

Quote:

Originally Posted by 4x41971SWB

Rear window trim.

Just checking.

**specialtyretail** · 04-03-2020, 09:30 AM

Quote:

Originally Posted by 4x41971SWB

Just checking.

Sold glass and moldings locally. Thanks, Fred.

**specialtyretail** · 04-03-2020, 10:06 AM

Quote:

Originally Posted by Cash3481

Fred, any luck on which rims are on the trick. Look like they may be 15x8’s I can’t tell.

The rims are 16.5,,,, yes,,, i typed that right,,, 16.5. Weird.....

Tripmiester · 04-03-2020, 10:15 AM

Fred

Any luck on the complete wiring harness
Cargo light with wiring
Windshield trim?
Thanks

**specialtyretail** · 04-03-2020, 10:18 AM

Quote:

Originally Posted by Tripmiester

Fred

Any luck on the complete wiring harness
Cargo light with wiring
Windshield trim?
Thanks

Getting back on it Saturday, got the weekend off from being an "essential" employee,,,, which is a joke in itself. The windshield and rear glass along with the trim sold locally last Sunday, never had any luck shipping the trim. I will have you some pics and pricing Saturday. Sorry for the delay, but real job kind of takes first slot. Thanks, Fred.

Tripmiester · 04-03-2020, 04:31 PM

Thanks Fred

Onry69CST · 04-04-2020, 08:22 PM

Do you still have the single door card trim from the pass side?

**gmc 2500 4x4** · 04-05-2020, 07:12 AM

hi fred, are the inner door controls,rods, and clips available? left/right for 69 gmc.

**specialtyretail** · 04-05-2020, 12:03 PM

Quote:

Originally Posted by Onry69CST

Do you still have the single door card trim from the pass side?

The upper trim above the inner door panels? They were already gone. Thanks, Fred.

**specialtyretail** · 04-05-2020, 12:04 PM

Quote:

Originally Posted by gmc 2500 4x4

hi fred, are the inner door controls,rods, and clips available? left/right for 69 gmc.

Doors have sold, but I bet my buddy 70 OriginalRust can hook you up. Thanks, Fred.

John H. · 04-05-2020, 01:42 PM

Fred what about the pedals?

davido1 · 04-10-2020, 12:58 AM

Interested in fenders (putter) and grill (all). Thanks.

f.flujan · 04-10-2020, 08:07 AM

Hi, I’m looking for the metal clip to hold the locking rod mechanism

Tripmiester · 04-10-2020, 09:30 AM

Truck has sold locally, it would probably be better if he took the parts off first the listed them.
I had some parts I needed, waited and waited and emailed and waited was told he would take them off then gone.
Not mad just frustrated.

04-02-2020, 10:39 PM	#78
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Just brought in a 70 C10, what you need??? Hi Fred, Any thoughts on the Rubber pedals and stainless? Ebrake, brake and accelerator pedal & stainless

04-03-2020, 10:15 AM	#82
Tripmiester Registered User Join Date: Jul 2018 Location: Bethany Connecticut Posts: 360	Re: Just brought in a 70 C10, what you need??? Fred Any luck on the complete wiring harness Cargo light with wiring Windshield trim? Thanks

04-03-2020, 04:31 PM	#84
Tripmiester Registered User Join Date: Jul 2018 Location: Bethany Connecticut Posts: 360	Re: Just brought in a 70 C10, what you need??? Thanks Fred

04-04-2020, 08:22 PM	#85
Onry69CST Registered User Join Date: Jan 2019 Location: Mantua Ohio Posts: 189	Re: Just brought in a 70 C10, what you need??? Do you still have the single door card trim from the pass side?

04-05-2020, 07:12 AM	#86
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,887	Re: Just brought in a 70 C10, what you need??? hi fred, are the inner door controls,rods, and clips available? left/right for 69 gmc.

04-05-2020, 01:42 PM	#89
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Just brought in a 70 C10, what you need??? Fred what about the pedals?

04-10-2020, 12:58 AM	#90
davido1 Registered User Join Date: Mar 2014 Location: Texas Posts: 16	Re: Just brought in a 70 C10, what you need??? Interested in fenders (putter) and grill (all). Thanks.

04-10-2020, 08:07 AM	#91
f.flujan Registered User Join Date: Dec 2016 Location: Menifee,ca Posts: 65	Re: Just brought in a 70 C10, what you need??? Hi, I’m looking for the metal clip to hold the locking rod mechanism

04-10-2020, 09:30 AM	#92
Tripmiester Registered User Join Date: Jul 2018 Location: Bethany Connecticut Posts: 360	Re: Just brought in a 70 C10, what you need??? Truck has sold locally, it would probably be better if he took the parts off first the listed them. I had some parts I needed, waited and waited and emailed and waited was told he would take them off then gone. Not mad just frustrated.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.