bucket seats and consoles

[#169fan]

here is what is going in mine. a set out of a 2006 dodge ram. they are leather and power! building the new brackets was a bit tricky, but it all worked out.

[wwotr]

Late to the party but here's mine in my 72 GMC Short/Fleet.

[turner15]

Roger what are they out of?

[Cbrown67]

roger i would also like to know

[wwotr]

Originally Posted by turner15

Roger what are they out of?

Guys,

I bought them brand new from Discountvantruck.com

Cost me $899.00 for the Seats (an additional $100.00 for the Leather) and another $200.00 for the Retractable Seat Belts (matching) and sub floor assembly to install them.

[402]

These are the Chevrolet 2010 PU leather seats I installed in my 70 C10.

[BadaSs_Cal]

Originally Posted by 402

These are the Chevrolet 2010 PU leather seats I installed in my 70 C10.

Attachment 616263
Attachment 616264

I love those seats.. I would try and see if I could get them to work without the headrests.. How did they bolt up?

Im going to my Pick n Pull tomorrow looking for buddy buckets.. but after seeing those I dont know what Im coming back with. (Like I ever do!!)

[402]

Thank You.

I removed the factory brackets and mounted the adjustment rails directly to the floor.
The front rail sits on the ridge in the floor and the rear rail sits on a ¾ in spacer.
This is a 3 piece seat; the center unit uses the original brackets.

Good luck on your search!

[effects66]

My 70

2001 Silverado power seats

[wzuke]

2002 Bonneville seats

[OldSkool71]

Originally Posted by Blackholebob

OldSkool71: Here's a couple more.The green is the stock light green but the white was some leftover white that I had toned down.This is where I'm at right now as I'm doing everything my self learning as I go and only get to work on it on the weekends and painting it piece by piece in the garage.It's got the 50 yard paint job.Looks good from 50 yards.

Sounds like a country song....lookiing good...keep at it....

[sshuttlesworth24]

Originally Posted by yellowblazer1969

i dont know about the rest of these guys but when we do them at our shop there are two ways we have done then either new repro upholstery is bought and then altered to the desired pattern or sometimes people use the (stubs) insert pieces with the scroll and have the covers made to their specs, sometimes dying is involved if you want to change the color of the stubs. thats just how i have done them in the past and they have worked out very well, most of the time we either do buddy buckets or utility buckets this way.
thanks, chris

Hate to bring back this old thread but I was wondering are you still doing this? I tried to dm you but couldn't. Feel free to email me sshuttlesworth24@gmail.com

[chevnkevin]

this is mine in my blazer , but the console will fit in the trucks too
it works for me and kinda looks like it coulda been

[Canuckvetter]

http://67-72chevytrucks.com/vboard/a...1&d=1459226436

Procar seats

[Andy4639]

I used a set of 99 Tahoe seats with 6 way electric and heat! I bought a 72 console and had it re done. Installed my amps inside it.

[Ironangel]

Not as comfy as the factory buckets, but I like a seat that holds me during a launch... ~Ghostrider~

[Already Gone]

subscribed

[reaper71]

Pic #1. This is a customer's truck during the mock-up stage,they are out of a Dodge Dakota

Pic #2. The seats after they were covered.

Pic #3. These are my seats in my 52 chevy they are out of a Grand Prix

Mark...

[Mapearso]

subscribed

[ashncole]

Originally Posted by Hart_Rod

This is what I'm putting in my Suburban:
.

Are these recovered oem or aftermarket purchase?

[Bigdav160]

Originally Posted by ashncole

Are these recovered oem or aftermarket purchase?

The rear two look like OE Suburban with aftermarket houndstooth covers. The front is a buddy bucket (?). I'm not sure if that would have been original to a '69 Suburban.

If you look at Hart Rods build thread you'll see he's changed his mind on the seating arrangement.

I thought I was the only one going buckets-buckets-bench in an older Suburban. Mine as a slightly different flare to it as I made the middle buckets out of two bench seats. They'll have arm rest like the benches.

[mgore68]

My seats came out of some kind of Honda according to PO. The console I built myself and wrapped the dash.

[ga-stepside]

I just finished my interior. I used Corbeau Sports Seats with home made seat frames. The two consoles are custom made using a Chevy Silverado console lid. The shifter is a cable driven B&M Unimatic mounted on a pedestal under the lower console to make it higher.

[1968aj]

Originally Posted by chevnkevin

this is mine in my blazer , but the console will fit in the trucks too
it works for me and kinda looks like it coulda been Attachment 1515552

Attachment 1515553

what did that console come out of? the original emblem helps to make it look right. I got a few of those emblems stashed away and now you have got me thinking.

[bL.A.zer90045]

Expedition.