Bagged 2012 Crew @ EyeKandyKustoms

[Flame Broiled]

So here is our 2012 Siverado Crew Cab. Ekstensive front kit and two link in the rear. KP watts link, and an Accuair for some lifts. In total the truck was lowered 17 inches....

Now to get out there and put her to use....






First step is to remove the bed and any brackets that will be in the way of the step notch



We have now measured and started welding in the notch


Now you can see how much more travel the new system will have.

[Flame Broiled]

Of course we need a little ACCUAIR to get things moving


Once the stock springs are out of the way its time to cut off all of the brackets.





Now its time to cut up the bed....




Here is where we stuffed the tank and compressors, still accessible from the bottom if needed.

[Flame Broiled]

Getting the tubs figured out...


Now the front needs a few more things, battery, air box, fuse panel are all in the way so its time to make so room.









With the stock suspension out of the way, we can now cut out all of the stock arm mounts.

[Flame Broiled]

With the firewall cut, its time to modify the inner fenders




I think we are headed in the right direction


And here we are ....

[Low Elco]

Nice clean work. Looks good!

[Flame Broiled]

Originally Posted by Low Elco

Nice clean work. Looks good!

Thanks, we take pride in our work. And always build things so that it can be taken apart and serviced elsewhere if need be. This truck was a ton of work... but well worth the result. If you want to see more of our work here is our site: www.eyekandykustoms.com

Aaron

[Flame Broiled]

The Bagged Crew had a friend over for a visit.... a heavily modified Dropped SRT10. These kind of toys make my job fun!!!!

[Chvy2NV]

really ice job on those inners . truck looks aswesome