MT WTB both high hump panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tom7254 · 03-12-2018, 09:42 PM

Looking for both high hump pieces (one that’s spot welded to firewall and other hump bolted to floor). Need these for a 1965 CK/10. Tom

shortstep60 · 03-13-2018, 06:27 AM

I will be getting some pulled this weekend. I get $175.00 for nice ones there getting hard to find

tom7254 · 03-13-2018, 01:53 PM

I'll both of them I'll pay the $175 for nice ones. Thanks. When you pull them let me know. What do you get for nice both door hinges. Tom

shortstep60 · 03-13-2018, 04:13 PM

Ok I will pull them Saturday thanks

tom7254 · 03-13-2018, 04:50 PM

one thing I forgot to mention. Can you cut out the top piece about 2" above the weld? You can leave it welded in but I need an additional 2" of sheet metal around it. Thanks. Tom

shortstep60 · 03-13-2018, 05:10 PM

I can do that when I put them in I drill the spot welds on the back side so I don't have all the drill holes on them and I glue them on with 3m panel glue and it look factory.

tom7254 · 03-13-2018, 06:05 PM

I just need the extra 2” around the panel because of rust. Your way sounds good though if I didn’t need the extra metal. Tom

Dubmorgan · 03-14-2018, 10:00 PM

If you have more than one set, I need a set also. I will be glad to pay the $175 plus shipping.

shortstep60 · 03-15-2018, 05:37 AM

Ok I have tom 7254 Rolland and Dubmorgan that want firewall panel and hump. I will get them pulled Saturday and will get another guys big back window section taken out thanks.

tom7254 · 03-15-2018, 06:16 AM

Sounds good. Tom

shortstep60 · 03-16-2018, 05:22 PM

I got two firewall panels cut out today will get more tomorrow. If anyone needs some parts let me no and will see what I have thanks

tom7254 · 03-16-2018, 05:49 PM

How do I pay? Tom

shortstep60 · 03-17-2018, 02:46 PM

I have all three firewall panels cut out and have some more if anyone else needs one thanks

Mr Big · 09-19-2018, 02:56 PM

I need the floor panels that cover the factory 60-66 m420 4sp, I need both the floor plate and the firewall piece that joins it. Is that what you have?

Thanks, Glen

Short 3/4 · 09-25-2018, 12:41 AM

Quote:

Originally Posted by Mr Big

I need the floor panels that cover the factory 60-66 m420 4sp, I need both the floor plate and the firewall piece that joins it. Is that what you have?

Thanks, Glen

If you did not find what your looking for , please check my post
'CA Garage sale'
I have a set listed there

03-12-2018, 09:42 PM	#1
tom7254 Registered User Join Date: Aug 2012 Location: stevensville Montana Posts: 71	WTB both high hump panels Looking for both high hump pieces (one that’s spot welded to firewall and other hump bolted to floor). Need these for a 1965 CK/10. Tom

03-13-2018, 06:27 AM	#2
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: WTB both high hump panels I will be getting some pulled this weekend. I get $175.00 for nice ones there getting hard to find

03-13-2018, 01:53 PM	#3
tom7254 Registered User Join Date: Aug 2012 Location: stevensville Montana Posts: 71	Re: WTB both high hump panels I'll both of them I'll pay the $175 for nice ones. Thanks. When you pull them let me know. What do you get for nice both door hinges. Tom

03-13-2018, 04:13 PM	#4
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: WTB both high hump panels Ok I will pull them Saturday thanks

03-13-2018, 04:50 PM	#5
tom7254 Registered User Join Date: Aug 2012 Location: stevensville Montana Posts: 71	Re: WTB both high hump panels one thing I forgot to mention. Can you cut out the top piece about 2" above the weld? You can leave it welded in but I need an additional 2" of sheet metal around it. Thanks. Tom

03-13-2018, 05:10 PM	#6
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: WTB both high hump panels I can do that when I put them in I drill the spot welds on the back side so I don't have all the drill holes on them and I glue them on with 3m panel glue and it look factory.

03-13-2018, 06:05 PM	#7
tom7254 Registered User Join Date: Aug 2012 Location: stevensville Montana Posts: 71	Re: WTB both high hump panels I just need the extra 2” around the panel because of rust. Your way sounds good though if I didn’t need the extra metal. Tom

03-14-2018, 10:00 PM	#8
Dubmorgan Registered User Join Date: Oct 2016 Location: Rio Vista, TX Posts: 26	Re: WTB both high hump panels If you have more than one set, I need a set also. I will be glad to pay the $175 plus shipping.

03-15-2018, 05:37 AM	#9
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: WTB both high hump panels Ok I have tom 7254 Rolland and Dubmorgan that want firewall panel and hump. I will get them pulled Saturday and will get another guys big back window section taken out thanks.

03-15-2018, 06:16 AM	#10
tom7254 Registered User Join Date: Aug 2012 Location: stevensville Montana Posts: 71	Re: WTB both high hump panels Sounds good. Tom

03-16-2018, 05:22 PM	#11
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: WTB both high hump panels I got two firewall panels cut out today will get more tomorrow. If anyone needs some parts let me no and will see what I have thanks

03-16-2018, 05:49 PM	#12
tom7254 Registered User Join Date: Aug 2012 Location: stevensville Montana Posts: 71	Re: WTB both high hump panels How do I pay? Tom

03-17-2018, 02:46 PM	#13
shortstep60 Registered User Join Date: Nov 2013 Location: Mayetta, Kansas Posts: 439	Re: WTB both high hump panels I have all three firewall panels cut out and have some more if anyone else needs one thanks

09-19-2018, 02:56 PM	#14
Mr Big Registered User Join Date: Jul 2007 Location: Goodlettsville Posts: 51	Re: WTB both high hump panels I need the floor panels that cover the factory 60-66 m420 4sp, I need both the floor plate and the firewall piece that joins it. Is that what you have? Thanks, Glen



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.