|
04-28-2005, 05:43 PM
|
#1 |
|
"Treasure the Ride"
Join Date: Nov 2001
Location: Mid Michigan, Harrison Michigan, USA
Posts: 682
|
FS 47-54 Parts
Inventory Clearance! I got stuck with some parts when a customer failed to pay for his parts. Here is a partial offering of the goods:
Headliner OEM Black $25.00 Bed Mount Blocks and Pad Set $20.00 Instrument to Dash Seal Set (does both gauges) $4.00 Running Board to Body Seals (does both sides) $42.00 Fuel Filler Hose Kit (2 hoses and 4 clamps) $8.00 Master Cylinder Floor Plug $6.00 Gas Cap, Stainless non-Locking $6.00 Steering Column Tube Seal (4-speed) $13.00 Accelerator Pad $49.00 Brake and Clutch Pad Set (both) $6.00 Kick Panel Set (RH and LH) Black $14.00 Steering Wheel to Dash Pad $2.00 Other parts also... just ask OK? THANKS! rico  email me: rico_bob@hotmail.com
__________________
If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com |
|
|
|
05-05-2005, 11:55 PM
|
#2 |
|
Registered User
Join Date: Sep 2004
Posts: 80
|
need good doors for 49 chev truck
|
|
|
|
|
05-06-2005, 08:16 PM
|
#3 |
|
"Treasure the Ride"
Join Date: Nov 2001
Location: Mid Michigan, Harrison Michigan, USA
Posts: 682
|
New doors for 52-54 Available now
We sell new reproduction doors for the 52-54 years for $365.00 each. The earlier doors (47-51) are not currently in production. However, I do know that they will be sometime in the near future.
I see that Chevy Duty has the 47-51 doors advertised, but to my knowledge they do not have any as I am a dealer for the same supplier they would be getting them from. And I know for a fact, that the doors are not yet being made. If you need other parts for your 51, please let us send you a quote. Thank you for your post. Best regards, Richard
__________________
If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com |
|
|
|
|
05-07-2005, 03:04 AM
|
#4 |
|
Registered User
Join Date: Sep 2004
Posts: 80
|
would 52 doors fit a 49. I am building a custom not worried about factory specs
|
|
|
|
|
05-07-2005, 10:12 AM
|
#5 |
|
"Treasure the Ride"
Join Date: Nov 2001
Location: Mid Michigan, Harrison Michigan, USA
Posts: 682
|
Someone here could verify that? I have a 1947 to 1954 Assembly Manual and from all I know the cab door opening is the same ....Is that right board members? rico_bob
__________________
If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com |
|
|
|
|
05-12-2005, 11:10 PM
|
#6 |
|
Registered User
Join Date: Sep 2004
Posts: 80
|
does anyone if a 47 through54 doors are the same?
|
|
|
|
|
05-13-2005, 08:11 AM
|
#7 |
|
Registered User
Join Date: Jan 2005
Location: WEST CENTRAL GEORGIA
Posts: 30
|
Yes the doors will fit. I have a 53 that had the early doors without vent windows. I switched back to the later doors with vent windows.
|
|
|
|
|
05-20-2005, 05:28 PM
|
#8 |
|
Registered User
Join Date: Sep 2004
Posts: 80
|
Hey rico I bought the inner fenders from you for my truck they looked great. How much for both doors and shipping to SC??Charleston
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
