TX WTB Neck for gas tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB72CHEVKT · 01-25-2013, 09:55 PM

I just need the neck to 75771.

Cheeseman · 01-25-2013, 11:09 PM

I have a few if you are referencing the rubber portion that goes from the tank to the gas filler/cap on the C10-30 trucks. $15 shipped to your door?

BB72CHEVKT · 01-26-2013, 09:55 AM

I need someone to cut the metal neck off a tank like in the picture below.

Cheeseman · 01-26-2013, 09:58 AM

I can do that too...same price shipped
Posted via Mobile Device

BB72CHEVKT · 01-26-2013, 10:06 AM

Quote:

Originally Posted by Cheeseman

I can do that too...same price shipped
Posted via Mobile Device

Cool. Pm me your adress and I will send you a money order.

**ScottH** · 01-26-2013, 10:42 AM

If it doesnt work out with cheeseman I have a tank I am throwing out.

BB72CHEVKT · 01-29-2013, 11:01 AM

Quote:

Originally Posted by ScottH

If it doesnt work out with cheeseman I have a tank I am throwing out.

Are you interested in shipping my the neck to 75771. I am not using it on a gas tank just to fill the factory hole in the cab.

Cheeseman · 01-29-2013, 09:29 AM

I went to remove it and it has rust around the base and some up in the neck. I wouldnt feel right selling it, or giving it away for that matter, in that shape. Sorry to hold ya up. Sounds like ScottH can hook you up.

**ScottH** · 01-29-2013, 11:04 AM

Sure, can cut off the neck and send it to u for the same price.

**burb71** · 01-29-2013, 12:06 PM

I had another neck put on my tank its soldered in so heat it and pull it out

cjohnson6772 · 01-29-2013, 01:46 PM

If anyone had an extra neck I can use one as well for a weldless tank delete project. '72 preferred.
Posted via Mobile Device

**lolife99** · 01-29-2013, 02:31 PM

Quote:

Originally Posted by cjohnson6772

If anyone had an extra neck I can use one as well for a weldless tank delete project. '72 preferred.
Posted via Mobile Device

PLEASE become a subscribing member,... and start your own WTB thread instead of hijacking a subcribing members thread.

cjohnson6772 · 01-29-2013, 02:41 PM

Quote:

Originally Posted by lolife99

PLEASE become a subscribing member,... and start your own WTB thread instead of hijacking a subcribing members thread.

I wasn't trying to hijack I just wanted to get in after the OP was taken care of but forget I posted. I'll take care of mine in a few months when i subscribe and sell the spare parts I've accumulated.
Posted via Mobile Device

BB72CHEVKT · 01-29-2013, 02:13 PM

Quote:

Originally Posted by ScottH

Sure, can cut off the neck and send it to u for the same price.

Thanks man. PM me your address and I will get a money order out.

01-25-2013, 09:55 PM	#1
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	WTB Neck for gas tank I just need the neck to 75771. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-25-2013, 11:09 PM	#2
Cheeseman Registered User Join Date: Sep 2012 Location: Unionville, MO Posts: 185	Re: WTB Neck for gas tank I have a few if you are referencing the rubber portion that goes from the tank to the gas filler/cap on the C10-30 trucks. $15 shipped to your door? __________________ 1969 Chevy C10 "Project Home Wrecker" "If you think you can't, you are probably right"

01-26-2013, 09:55 AM	#3
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: WTB Neck for gas tank I need someone to cut the metal neck off a tank like in the picture below. Attached Images __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-26-2013, 09:58 AM	#4
Cheeseman Registered User Join Date: Sep 2012 Location: Unionville, MO Posts: 185	Re: WTB Neck for gas tank I can do that too...same price shipped Posted via Mobile Device __________________ 1969 Chevy C10 "Project Home Wrecker" "If you think you can't, you are probably right"

01-26-2013, 10:42 AM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB Neck for gas tank If it doesnt work out with cheeseman I have a tank I am throwing out. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-29-2013, 09:29 AM	#8
Cheeseman Registered User Join Date: Sep 2012 Location: Unionville, MO Posts: 185	Re: WTB Neck for gas tank I went to remove it and it has rust around the base and some up in the neck. I wouldnt feel right selling it, or giving it away for that matter, in that shape. Sorry to hold ya up. Sounds like ScottH can hook you up. __________________ 1969 Chevy C10 "Project Home Wrecker" "If you think you can't, you are probably right"

01-29-2013, 11:04 AM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB Neck for gas tank Sure, can cut off the neck and send it to u for the same price. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-29-2013, 12:06 PM	#10
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,714	Re: WTB Neck for gas tank I had another neck put on my tank its soldered in so heat it and pull it out

01-29-2013, 01:46 PM	#11
cjohnson6772 Registered User Join Date: Dec 2010 Location: NC Posts: 666	Re: WTB Neck for gas tank If anyone had an extra neck I can use one as well for a weldless tank delete project. '72 preferred. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.