my 98' Streetrod build - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 02-19-2011, 11:45 AM

butternut1972 · 02-19-2011, 01:19 PM

Beautiful! You have done an awesome job. I bet your getting excited to drive it. Your truck is one my favorites on the site.

Inverter · 02-19-2011, 04:51 PM

Thanks yall.
I am gettn excited about it,,again.Its been in the body shop for 11 months so I almost lost interest. Should be home by next month.
Thanks,everyone,for the feedback.

One day...

jb1016 · 02-19-2011, 10:02 PM

I bet you're stoked. It's looking great.

JohnC · 02-21-2011, 11:26 AM

Looks sweet man! Keep that momentum ball rolling!!!

aggie91 · 02-21-2011, 01:48 PM

Once itis home, what do you have left to do? Its looks amazing!

redman37777 · 02-22-2011, 12:03 AM

please tell me what color u paintd the cab to make it that flat black and where u were able to find it

Vega_67C10 · 02-22-2011, 08:19 PM

Quote:

Originally Posted by redman37777

please tell me what color u paintd the cab to make it that flat black and where u were able to find it

My guess would be Hotrodz Black??

Inverter · 02-23-2011, 10:24 AM

Thanks yall.

Quote:

Originally Posted by aggie91

Once itis home, what do you have left to do? Its looks amazing!

All the wiring.Double check everything and prime n fire the motor.

Quote:

Originally Posted by redman37777

please tell me what color u paintd the cab to make it that flat black and where u were able to find it

It was actually an accident. Years ago I had a bodyshop spray it satin black.When I went to pick it up,they had just sprayed it w/black primer..I said WTF?,out loud,.I needed the truck so I said just scuff n spray it w/some sealer so it looks satin. Im not sure what they did but you can see its preety close to satin black.
I would go w/a single stage satin black like HRF,as mentioned.

modblacksmith · 02-25-2011, 07:19 PM

Grate build, just sat in the office for an hour reading threw it. Your truck looks grate, love the color. I was wondering how you are going to finish off the dash or if your going to leave it open? I saw you had some templates made up in one of the pics but there wasn't anything after that.

Inverter · 02-28-2011, 12:45 AM

I thought I had this pic somewhere in the thread but I forget.
I will have some wedge shaped covers over the top of the two pod areas made w/the same material,10 gauge aluminum.

Thanks for the good word.

modblacksmith · 02-28-2011, 12:56 AM

[QUOTE=Inverter;4519097]I thought I had this pic somewhere in the thread but I forget.
I will have some wedge shaped covers over the top of the two pod areas made w/the same material,10 gauge aluminum.

Yeah you do have that pic up. I was asking about the wedge shaped covers, that's going to look way cool. Different from the normal glass dashes.

my4by2 · 03-12-2011, 09:51 AM

Beautiful truck man! Can't wait to see the finished product!!! Love the body mods & the interior plan so far!

Kim57 · 03-18-2011, 09:34 PM

I lost track of this thread for a while.
The truck is looking great, I love the color.
Kim

seth is usdm · 03-20-2011, 10:50 PM

OMG i dont how i didnt find this thread before. your work is amazing. i love your ideas and follow through of them. this truck is turning out beautifully. i have a thing for satin paints but the color you chose looks awesome! cant wait to see it out in the sun and especially with some dark wheels.

81k10 · 03-26-2011, 11:07 PM

hows the project going man? im in love with that color. and the pure uniqueness of the fabrication. you are THE man.

jared.landis · 03-30-2011, 08:35 PM

im am jealous. you are very talented and have a great eye for detail. i love the blue. keep us posted. i cant wait to see what you do with the interior.

MarKist · 05-17-2011, 11:06 AM

ok, its been almost 2 months, I'm freakin going crazy over here, any updates? this thing is gonna be all over the magazines. are you gonna let Anita model the Pics

Inverter · 06-06-2011, 12:19 PM

Finally got this thing home. These are all the pics I could get.Its still a roller so I cant move it around. Overall turned out well,disappointed in some of the fitment and rough edges but I was tired of getting labor bills for little to no progress. On a scale,,I'd say its an 8.

Feels good to have it home where I know its safe.Thanks for lookin.

Workin on getting the dash panels in place and laying out wiring. Lot of work to still do.

jb1016 · 06-06-2011, 12:22 PM

Awesome, glad you got it home! That dash is gonna be killer.

VA72C10 · 06-06-2011, 01:50 PM

Looking great!

Kim57 · 06-06-2011, 06:16 PM

Looks real nice.
Kim

JohnC · 06-10-2011, 09:29 AM

Looks a 100 times better sitting in your garage rather than the shop! Congrats, now get busy!

Black Widow Customs · 06-21-2011, 02:58 AM

very nice build.. cant wait to see complete

LuckyMe · 08-17-2011, 01:36 AM

Looking forward to seeing the end result! Amazing work so far, love the dash

02-19-2011, 11:45 AM	#301
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: my 98' Streetrod build __________________ Scott 93 crew cab build Project 62

02-19-2011, 01:19 PM	#302
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: my 98' Streetrod build Beautiful! You have done an awesome job. I bet your getting excited to drive it. Your truck is one my favorites on the site. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

02-19-2011, 04:51 PM	#303
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: my 98' Streetrod build Thanks yall. I am gettn excited about it,,again.Its been in the body shop for 11 months so I almost lost interest. Should be home by next month. Thanks,everyone,for the feedback. One day... __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484

02-21-2011, 11:26 AM	#305
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: my 98' Streetrod build Looks sweet man! Keep that momentum ball rolling!!!

02-21-2011, 01:48 PM	#306
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: my 98' Streetrod build Once itis home, what do you have left to do? Its looks amazing! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-22-2011, 12:03 AM	#307
redman37777 Registered User Join Date: Feb 2011 Location: tennessee Posts: 11	Re: my 98' Streetrod build please tell me what color u paintd the cab to make it that flat black and where u were able to find it

02-25-2011, 07:19 PM	#310
modblacksmith Registered User Join Date: Feb 2011 Location: Boise Id Posts: 186	Re: my 98' Streetrod build Grate build, just sat in the office for an hour reading threw it. Your truck looks grate, love the color. I was wondering how you are going to finish off the dash or if your going to leave it open? I saw you had some templates made up in one of the pics but there wasn't anything after that. __________________ Professional hot glue and pop cycle stick engineer. 72 K/20 soon to be C/10, 454, Th400, 9” rear. 01 GMC 2500HD 8.1, Allison, daily/towpig gas guzzler. 78 Bahner 19’ jet boat, 460 Furd turd.

02-28-2011, 12:45 AM	#311
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: my 98' Streetrod build I thought I had this pic somewhere in the thread but I forget. I will have some wedge shaped covers over the top of the two pod areas made w/the same material,10 gauge aluminum. Thanks for the good word. __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484

02-28-2011, 12:56 AM	#312
modblacksmith Registered User Join Date: Feb 2011 Location: Boise Id Posts: 186	Re: my 98' Streetrod build [QUOTE=Inverter;4519097]I thought I had this pic somewhere in the thread but I forget. I will have some wedge shaped covers over the top of the two pod areas made w/the same material,10 gauge aluminum. Yeah you do have that pic up. I was asking about the wedge shaped covers, that's going to look way cool. Different from the normal glass dashes. __________________ Professional hot glue and pop cycle stick engineer. 72 K/20 soon to be C/10, 454, Th400, 9” rear. 01 GMC 2500HD 8.1, Allison, daily/towpig gas guzzler. 78 Bahner 19’ jet boat, 460 Furd turd.

03-12-2011, 09:51 AM	#313
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: my 98' Streetrod build Beautiful truck man! Can't wait to see the finished product!!! Love the body mods & the interior plan so far! __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

03-18-2011, 09:34 PM	#314
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: my 98' Streetrod build I lost track of this thread for a while. The truck is looking great, I love the color. Kim

03-20-2011, 10:50 PM	#315
seth is usdm Registered User Join Date: Nov 2009 Location: Seattle, Washington Posts: 100	Re: my 98' Streetrod build OMG i dont how i didnt find this thread before. your work is amazing. i love your ideas and follow through of them. this truck is turning out beautifully. i have a thing for satin paints but the color you chose looks awesome! cant wait to see it out in the sun and especially with some dark wheels. __________________ 1979 chevy blazer 2wd drop spindles shackles new paint wheels tires custom one of badges cut on waterjet brakes exhaust carpet 2" cowl hood window seals misc weather seals door panels crate 350 w/ 67k turbo 350 3.08 rear end gear ratio FOR SALE! http://67-72chevytrucks.com/vboard/c...ct=4838&cat=13

03-26-2011, 11:07 PM	#316
81k10 Registered User Join Date: Sep 2009 Location: crawfordsville, IN Posts: 29	Re: my 98' Streetrod build hows the project going man? im in love with that color. and the pure uniqueness of the fabrication. you are THE man. __________________ current trucks= -DD 90 RCSB 4x4 350/700r4 (green goblin) -87 RCSB 4x4 on 3/4 tons. 355/built 700r4.np208(soon to be 205). 10 bolt front 3.73s. 14ff rear 3.73s. 6inch suspension 3inch body. 37x12.50 Wrangler m/t military's. (sinister 13) Past 73-87s= -81 RCSB 4x4 built 350/SM465/205. 6inch suspension. 35x12.50 courser a/t's. 4.11s f/r (ravvid red) -80 RCLB 4x4 454/350/205. 6inch suspension 3inch body. 38.5 gumbos. (mudslut) 17 years old. have had 13 different vehicles. no wrecks.

03-30-2011, 08:35 PM	#317
jared.landis Registered User Join Date: Feb 2010 Location: overland park, ks Posts: 48	Re: my 98' Streetrod build im am jealous. you are very talented and have a great eye for detail. i love the blue. keep us posted. i cant wait to see what you do with the interior.

05-17-2011, 11:06 AM	#318
MarKist Registered User Join Date: Sep 2007 Location: Gas House N.C. Posts: 65	Re: my 98' Streetrod build ok, its been almost 2 months, I'm freakin going crazy over here, any updates? this thing is gonna be all over the magazines. are you gonna let Anita model the Pics __________________ Markist oh well,..you'll have that!!



Register or Log In To remove these advertisements.

06-06-2011, 12:19 PM	#319
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: my 98' Streetrod build Finally got this thing home. These are all the pics I could get.Its still a roller so I cant move it around. Overall turned out well,disappointed in some of the fitment and rough edges but I was tired of getting labor bills for little to no progress. On a scale,,I'd say its an 8. Feels good to have it home where I know its safe.Thanks for lookin. Workin on getting the dash panels in place and laying out wiring. Lot of work to still do. __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484

06-06-2011, 01:50 PM	#321
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: my 98' Streetrod build Looking great! __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-06-2011, 06:16 PM	#322
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: my 98' Streetrod build Looks real nice. Kim

06-10-2011, 09:29 AM	#323
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: my 98' Streetrod build Looks a 100 times better sitting in your garage rather than the shop! Congrats, now get busy!

06-21-2011, 02:58 AM	#324
Black Widow Customs Registered User Join Date: Dec 2008 Location: Tucson, Az. Posts: 75	Re: my 98' Streetrod build very nice build.. cant wait to see complete

08-17-2011, 01:36 AM	#325
LuckyMe Registered User Join Date: Jul 2011 Location: Dallas, TX Posts: 56	Re: my 98' Streetrod build Looking forward to seeing the end result! Amazing work so far, love the dash __________________ Matt '88 GMC C1500(Hope to start a build thread soon)

Register or Log In To remove these advertisements.