Anyone Interested; Body Drop Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joey-D · 08-20-2004, 03:13 PM

I have been working on this cab for months and am kinda burned out, I just want a rust free cab. It is a 69 cab with a modified 4" body drop. Modified meaning, the rear frame mounts do not move, but he front on are lowered on the frame 1 1/2". Meaning under the seat the floor is raised 4", but in the foot area, it is only raised 2 1/2". I have replaced all four cab mounts, left and right floorboard, passenger side cab corner, rocker, and dog pillar. Also because of the body drop, have a custom inner rocker. I have shaved the heater box and fixed some rust on the firewall. Shaved the drip rails up to the roofline. I just replaced the whole back panel because the original was pretty beat up. I also have the cab corner, rocker, inner rocker, and dog pillar for the drivers side that still need to be installed. There is also rust that need to removed from the roofline (above the windshield), rear corners of the cab floor, and also the footwell to windshield behind the dash needs to be replaced. I have sections from another cab included to use as replacement panels. I have done alot of work to this cab, but just want to move on. I will keep the vin tag, so don't worry if you have a cab with out a title. Pictures are worth a thousand words, so hope fully these speak for themselves. My computer is broke, but I will try and check my email and pm's as often as possible. It would be easier on me and hopefully you if you just called me at 314-226-6420. I live in St. Louis Misouri. My email is JoeyDi84@msn.com. Thanks

Joey-D · 08-20-2004, 03:17 PM

More pics

Joey-D · 08-20-2004, 04:28 PM

ttt

dropdprpls10 · 08-21-2004, 12:45 PM

how much .. i might or my buddy might be intersted??

Joey-D · 08-21-2004, 10:39 PM

If you pick up this cab and bring it too me straight trade! As long as this cab is as good as it sounds, you could probaly pick it for around $100 and then just have to pick it up and bring it too me. Intersted?

Joey-D · 08-24-2004, 08:46 PM

Sorry I wasn't paying attention when I made that last post, I had found another cab in texas that the guy only wanted $125obo for. I ment to put in a hyperlink but my gf was bothering me at the time. Anyway that cab is gone. I really want a small back window cab, but anythings fine. If you really need the vin, I can sell it with the cab and title, but would rather not unless I had another one. I have about $250 in metal and hundreds of ours of time in the cab, so I figured I would get the least screwed by trading it. So one could probaly find another cab for far less than I would accept for this one. To sum it all up, make me an offer!

firedog · 08-24-2004, 11:28 PM

So Dirt Did We Cut That Cab Up For Nothing Here I Was Ready To See What You Were Going To Do With The Parts Good Luck

Give Me A Call Sometime Mike

Joey-D · 08-28-2004, 03:34 PM

Im in over my head now, just want to start putting things back together, you know. I have those trim pieces sitting on my work bench along with a gazillion other things. When I have sometime I will run them down to you.

08-20-2004, 03:13 PM	#1
Joey-D City's Articulation Ramp Join Date: Jan 2004 Location: St. Louis Missouri Posts: 452	Anyone Interested; Body Drop Cab I have been working on this cab for months and am kinda burned out, I just want a rust free cab. It is a 69 cab with a modified 4" body drop. Modified meaning, the rear frame mounts do not move, but he front on are lowered on the frame 1 1/2". Meaning under the seat the floor is raised 4", but in the foot area, it is only raised 2 1/2". I have replaced all four cab mounts, left and right floorboard, passenger side cab corner, rocker, and dog pillar. Also because of the body drop, have a custom inner rocker. I have shaved the heater box and fixed some rust on the firewall. Shaved the drip rails up to the roofline. I just replaced the whole back panel because the original was pretty beat up. I also have the cab corner, rocker, inner rocker, and dog pillar for the drivers side that still need to be installed. There is also rust that need to removed from the roofline (above the windshield), rear corners of the cab floor, and also the footwell to windshield behind the dash needs to be replaced. I have sections from another cab included to use as replacement panels. I have done alot of work to this cab, but just want to move on. I will keep the vin tag, so don't worry if you have a cab with out a title. Pictures are worth a thousand words, so hope fully these speak for themselves. My computer is broke, but I will try and check my email and pm's as often as possible. It would be easier on me and hopefully you if you just called me at 314-226-6420. I live in St. Louis Misouri. My email is JoeyDi84@msn.com. Thanks Attached Images __________________ 85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough."

08-20-2004, 03:17 PM	#2
Joey-D City's Articulation Ramp Join Date: Jan 2004 Location: St. Louis Missouri Posts: 452	More pics Attached Images __________________ 85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough."

08-20-2004, 04:28 PM	#3
Joey-D City's Articulation Ramp Join Date: Jan 2004 Location: St. Louis Missouri Posts: 452	ttt __________________ 85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough."

08-21-2004, 10:39 PM	#5
Joey-D City's Articulation Ramp Join Date: Jan 2004 Location: St. Louis Missouri Posts: 452	If you pick up this cab and bring it too me straight trade! As long as this cab is as good as it sounds, you could probaly pick it for around $100 and then just have to pick it up and bring it too me. Intersted? __________________ 85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough."

08-24-2004, 08:46 PM	#6
Joey-D City's Articulation Ramp Join Date: Jan 2004 Location: St. Louis Missouri Posts: 452	Sorry I wasn't paying attention when I made that last post, I had found another cab in texas that the guy only wanted $125obo for. I ment to put in a hyperlink but my gf was bothering me at the time. Anyway that cab is gone. I really want a small back window cab, but anythings fine. If you really need the vin, I can sell it with the cab and title, but would rather not unless I had another one. I have about $250 in metal and hundreds of ours of time in the cab, so I figured I would get the least screwed by trading it. So one could probaly find another cab for far less than I would accept for this one. To sum it all up, make me an offer! __________________ 85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough."

08-21-2004, 12:45 PM	#4
dropdprpls10 Registered User Join Date: Jun 2004 Location: Reading PA Posts: 164	how much .. i might or my buddy might be intersted??

08-24-2004, 11:28 PM	#7
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,004	So Dirt Did We Cut That Cab Up For Nothing Here I Was Ready To See What You Were Going To Do With The Parts Good Luck Give Me A Call Sometime Mike __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride

08-28-2004, 03:34 PM	#8
Joey-D City's Articulation Ramp Join Date: Jan 2004 Location: St. Louis Missouri Posts: 452	Im in over my head now, just want to start putting things back together, you know. I have those trim pieces sitting on my work bench along with a gazillion other things. When I have sometime I will run them down to you. __________________ 85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.