WA NEW: 3/4T-1T Brake Booster System-Only Here! Finally!

[burb71]

I'm looking to get 1 unit in Black.
If you have any left.
My truck is a 68 C/20, 4 wheel drum brakes.
I bead blasted and painted my original proportioning valve,
Distribution valve or whatever it's called.
It will work with your setup correct?

[PICKMUP]

Originally Posted by burb71

I'm looking to get 1 unit in Black.
If you have any left.
My truck is a 68 C/20, 4 wheel drum brakes.
I bead blasted and painted my original proportioning valve,
Distribution valve or whatever it's called.
It will work with your setup correct?

I can do either a 9"DD set (like your truck came with) or the bigger 11"DD. The master cyl will be the correct size to match to your stock drum/drum system. The distribution block will be adjustable, so you can set it for exact stopping. You may want to adapt your lines to this or run simple new lines up front.
9"DD: $450 shipped
11"CC: $475 shipped

[Terrysch]

Frank,
Planning to buy either this 3/4 ton or your 1/2 ton system.
I have a 72 GMC Jimmy 4x4 with front disc and rear drum brakes.
Tires are 31x10.5 with 15inch rims.
Which of the two systems do you recommend for my Jimmy?
In stock?
Terry

[PICKMUP]

Originally Posted by Terrysch

Frank,
Planning to buy either this 3/4 ton or your 1/2 ton system.
I have a 72 GMC Jimmy 4x4 with front disc and rear drum brakes.
Tires are 31x10.5 with 15inch rims.
Which of the two systems do you recommend for my Jimmy?
In stock?
Terry

I think you will like the 9DD sys best with those OE size tires. It is 30% more powerful so will improve braking over stock. The 11DD is big and over powers. It is better suited for BIG wheels/tires.

[Terrysch]

Frank,
Thought so, but wanted to make sure.
Do you have one in stock for me to buy?
Terry

[throttlesteer]

Looking for a 3/4T 1T for a 1972 Blazer, disc drum on 35's. Do you have a gold set up in stock?
If so whats the total with PP fees please.

Thank you!!

[DA71Grande]

Originally Posted by PICKMUP

It is still "2020"! One shipment of new boosters was lost and another was wrong...and that was from two different special suppliers/builders. Should be corrected/redone this week.

Frank,

Any word on your booster parts?

[NorCalC20LWB]

Received the booster/MC setup today, looks great and looking forward to installing. Thanks again Frank.

Brian

[PICKMUP]

Originally Posted by DA71Grande

Frank,

Any word on your booster parts?

I just got in another few yesterday---wrong again---so they will be sending out more immediately. Gold coming///Black pending.

[PICKMUP]

Originally Posted by Terrysch

Frank,
Thought so, but wanted to make sure.
Do you have one in stock for me to buy?
Terry

I do have everything to do a 1/2T 9DD set. See more info/details on the 1/2T thread. I'll bring it TTT for you. Frank

[DA71Grande]

Originally Posted by PICKMUP

I just got in another few yesterday---wrong again---so they will be sending out more immediately. Gold coming///Black pending.

Frank

Anything on these

[PICKMUP]

Originally Posted by DA71Grande

Frank

Anything on these

Yes! A couple GOLD came in this evening. Call for them and I will build you a set. No word on BLK.
Thanks, Frank

[DA71Grande]

Originally Posted by PICKMUP

Yes! A couple GOLD came in this evening. Call for them and I will build you a set. No word on BLK.
Thanks, Frank

I’ll take a gold one

Pm sent

[spmtamu11]

Do you have any in stock?

TIA!

[PICKMUP]

Originally Posted by spmtamu11

Do you have any in stock?

TIA!

Yes, I have a new GOLD SET in stock.

[NorCalC20LWB]

Just a PSA....I put Frank's MC/Booster setup on my 72 3/4 ton and it made a world of difference. It always had a hard pedal and I needed to really stomp on it to make the truck stop. Now it feels like a modern truck, nice and smooth with much less pressure. Highly recommend.

[PICKMUP]

TTT for Doug. Prices still holding at 2020 rates: $350 + 75 (S/H) + 3% (PP). Only GOLD available...B/O on BLK.

[CHEVY_DUDE]

Hey there, need one for a 72 Jimmy 3/4 ton... disc/drum running 35's. Do you have anything in stock that you would recommend for this set up? If so, can you send me the total cost including PP fees? Thank you!

[PICKMUP]

Originally Posted by CHEVY_DUDE

Hey there, need one for a 72 Jimmy 3/4 ton... disc/drum running 35's. Do you have anything in stock that you would recommend for this set up? If so, can you send me the total cost including PP fees? Thank you!

Yes. This above unit is the most powerful and is a bolt on. I have all components for BLK or GOLD. Workload is backed up a couple weeks. Plan accordingly. Thanks, Frank

[CHEVY_DUDE]

Put me down for a black one. Im in no rush to receive. Just want to get my order in. I'll send the payment via PP with a note of what I need sometime today. Thanks.

[darkhorse970]

Originally Posted by PICKMUP

TTT for Doug. Prices still holding at 2020 rates: $350 + 75 (S/H) + 3% (PP). Only GOLD available...B/O on BLK.

Is the 1/2 ton 9” DD the same price? I’m interested in one in black.

[PICKMUP]

Originally Posted by darkhorse970

Is the 1/2 ton 9” DD the same price? I’m interested in one in black.

No. It is less. I would refer you to the 1/2T Thread for all of the info.
This is where I do 3/4T only. Thanks, Frank

[builtnb]

I am interested in a black disc drum do you have any available thanks Wayne

[spmtamu11]

Interested in a gold disc/drum setup up.

[Accelo]

Do these move the master cylinder forward? Will the stock brake lines for an factory power brake truck bolt up?