Started my first frame off - 72 SWB LS1, 6-spd manual - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 04-02-2012, 11:41 PM

Looking good!
Posted via Mobile Device

gearys 5600 · 04-02-2012, 11:44 PM

Nice work ..

trkfrk · 04-04-2012, 07:10 PM

Quote:

Originally Posted by 68 Four on the Floor

Nice work

Thanks!

Quote:

Originally Posted by mcbassin

Looking good!
Posted via Mobile Device

Thanks. Your build has inspired me to pay attention to detail.

Quote:

Originally Posted by gearys 5600

Nice work ..

Thanks. I hope my body & paint come out like your truck. Nice build..
My new bed side just came in. I am hoping to get some etching primer on my bare metal parts this weekend. Were suppose to be high 80's this weekend. I can't use my swamp cooler in the garage until I primer.

trkfrk · 04-08-2012, 07:01 PM

I had a productive weekend. I was able to get my door hinges, glove box door, windshield cowl and bed parts primed.
My new bed side came in also.

And the Eater Bunny came last night when I finished...

I will be choosing my paint color in the next couple of weeks. I am down to about 26 colors???? This is the hardest part of my build so far. I have decided not to assemble the bed until I paint the bottom side of the floor and inside of the bed sides before assembling.

VA72C10 · 04-08-2012, 11:03 PM

Looking really good! Paint is super hard to decide!

trkfrk · 04-09-2012, 10:10 PM

Quote:

Originally Posted by VA72C10

Looking really good! Paint is super hard to decide!

VA72C10 Thank You... I am leaning towards Red.

My stainless steel bolt kit finally arrived today. The kit came with every bolt needed to assemble the body, including the interior parts. The nice thing is the bags are labeled with the locations. I had to order the bed bolts separate.

mcbassin · 04-09-2012, 11:16 PM

Very nice work on the bed and other parts. That looks like a nice set of hardware.
Did you rebuild your hinges before you primered them? If so, where did you buy the rebuild kit? thanks

trkfrk · 04-10-2012, 07:17 PM

Quote:

Originally Posted by mcbassin

Very nice work on the bed and other parts. That looks like a nice set of hardware.
Did you rebuild your hinges before you primered them? If so, where did you buy the rebuild kit? thanks

Thanks - I did not rebuild the hinges. The doors seem to very tight before I removed them. Tuckers Classic Auto Parts here in Vegas have been a good source for me on some of the hard to find parts. Ask for Cody or Tom.

Thanks

chaseman17 · 04-10-2012, 09:55 PM

What a great project!
Posted via Mobile Device

67c10rustbuket · 04-10-2012, 10:46 PM

Awesome project! I saw and drooled over your project before but I guess I forgot to subscribe so I had to search and find it again. That 6 speed is going to be a lot of fun. I test drove a GTO ls2 6 speed and some how left the dealer without it. Later

**67cheby** · 04-11-2012, 09:56 AM

Quote:

Originally Posted by chaseman17

What a great project!
Posted via Mobile Device

CHASEMAN ....beautiful bed any build pics ?

**67cheby** · 04-11-2012, 09:56 AM

i just ordered hinge rebuild kits from Classic parts from KC

trkfrk · 04-11-2012, 06:53 PM

Quote:

Originally Posted by 67cheby

CHASEMAN ....beautiful bed any build pics ?

x2 with 67cheby... What kind of wood did you use? I plan on putting wood over my floor. I priced a new floor and it was exspensive. I figured if I'm going to spend that kind of money I am going wood.

quote=chaseman17;5306129]What a great project!
Posted via Mobile Device[/quote]

Quote:

Originally Posted by 67c10rustbuket

Awesome project! I saw and drooled over your project before but I guess I forgot to subscribe so I had to search and find it again. That 6 speed is going to be a lot of fun. I test drove a GTO ls2 6 speed and some how left the dealer without it. Later

I am looking forward to a manual trans to drive... I haven't owned one since my 69 GMC short bed with 3 on the tree in my Navy days.

Thanks for the compliments!!

JD'S 69 · 04-15-2012, 03:22 AM

Very cool build. I was wondering about your little sand blaster, what kind of sand are you using. And the shopvac that's hooked up to it how does that work??
Posted via Mobile Device
Posted via Mobile Device

trkfrk · 04-27-2012, 12:08 AM

Quote:

Originally Posted by JD'S 69

Very cool build. I was wondering about your little sand blaster, what kind of sand are you using. And the shopvac that's hooked up to it how does that work??
Posted via Mobile Device
Posted via Mobile Device

Thank You!

The sand blasting cabinet and sand I picked up from Harbor Freight. I don't remember the name of the media but it is made for the cabinet. You can get various grits. The shop vac plugs in the side of the cabinet and helps reduce the dust for visibility.

I have been working on the body non-stop. I installed the front clip on the cab without the frame for block sanding for now. It will all come off again for primer and true alignment.

I have color!!! I decided to go with Red. I am starting with the bottom of the bed floor and cab floor...

Welded up the side markers on the bed sides. I am learning this is a lot easier to do the body work, block sanding and prep with the bed disassembled.

I think I will be block sanding for the next 6 months....

**72 tigger** · 04-27-2012, 07:10 AM

Looking great! All the prep work is the hard part- but worth it in the end. Keep it up- looking forward to future progress!

**67cheby** · 04-27-2012, 08:28 AM

Nice !
Posted via Mobile Device

mcbassin · 04-27-2012, 08:44 AM

I love the red paint. I know how much time it took you to get this point. Keep it up.

butternut1972 · 04-27-2012, 10:47 AM

Very Nice! Looks like the guard dog is keeping a close eye on things for you.

darkhorse970 · 06-09-2012, 09:38 AM

Very nice build!

mcmlxix · 08-18-2012, 12:31 AM

Any updates?

gearys 5600 · 08-18-2012, 12:57 AM

Quote:

Originally Posted by mcmlxix

Any updates?

x-2

VA72C10 · 08-18-2012, 02:00 AM

x3

mcbassin · 08-18-2012, 09:30 AM

Thought there was an update.....

Posted via Mobile Device

darkgable79 · 08-20-2012, 07:45 AM

Quote:

Originally Posted by mcbassin

Thought there was an update.....

Posted via Mobile Device

They fooled me too.

04-02-2012, 11:41 PM	#176
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Looking good! Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-02-2012, 11:44 PM	#177
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Nice work .. __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

04-08-2012, 07:01 PM	#179
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Started my first frame off - 72 SWB LS1, 6-spd manual I had a productive weekend. I was able to get my door hinges, glove box door, windshield cowl and bed parts primed. My new bed side came in also. And the Eater Bunny came last night when I finished... I will be choosing my paint color in the next couple of weeks. I am down to about 26 colors???? This is the hardest part of my build so far. I have decided not to assemble the bed until I paint the bottom side of the floor and inside of the bed sides before assembling. __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

04-08-2012, 11:03 PM	#180
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Looking really good! Paint is super hard to decide! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-09-2012, 11:16 PM	#182
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Very nice work on the bed and other parts. That looks like a nice set of hardware. Did you rebuild your hinges before you primered them? If so, where did you buy the rebuild kit? thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-10-2012, 09:55 PM	#184
chaseman17 Registered User Join Date: Mar 2010 Location: Holland, MI Posts: 143	Re: Started my first frame off - 72 SWB LS1, 6-spd manual What a great project! Posted via Mobile Device __________________ 6T7 C10

04-10-2012, 10:46 PM	#185
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,807	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Awesome project! I saw and drooled over your project before but I guess I forgot to subscribe so I had to search and find it again. That 6 speed is going to be a lot of fun. I test drove a GTO ls2 6 speed and some how left the dealer without it. Later __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

04-11-2012, 09:56 AM	#187
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Started my first frame off - 72 SWB LS1, 6-spd manual i just ordered hinge rebuild kits from Classic parts from KC __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-15-2012, 03:22 AM	#189
JD'S 69 Registered User Join Date: Mar 2012 Location: Baker city Oregon Posts: 268	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Very cool build. I was wondering about your little sand blaster, what kind of sand are you using. And the shopvac that's hooked up to it how does that work?? Posted via Mobile Device Posted via Mobile Device

04-27-2012, 07:10 AM	#191
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,213	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Looking great! All the prep work is the hard part- but worth it in the end. Keep it up- looking forward to future progress!

04-27-2012, 08:28 AM	#192
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Nice ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-27-2012, 08:44 AM	#193
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Started my first frame off - 72 SWB LS1, 6-spd manual I love the red paint. I know how much time it took you to get this point. Keep it up. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-27-2012, 10:47 AM	#194
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Very Nice! Looks like the guard dog is keeping a close eye on things for you. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

06-09-2012, 09:38 AM	#195
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Very nice build! __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

08-18-2012, 12:31 AM	#196
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Any updates? __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE



Register or Log In To remove these advertisements.

08-18-2012, 02:00 AM	#198
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Started my first frame off - 72 SWB LS1, 6-spd manual x3 __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-18-2012, 09:30 AM	#199
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Started my first frame off - 72 SWB LS1, 6-spd manual Thought there was an update..... Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.