|
04-21-2019, 10:52 AM
|
#1 |
|
Registered User
Join Date: Sep 2018
Location: Downey
Posts: 57
|
Cammed my 5.3 ls
Just cammed my 5.3 ls just waiting for the tune so pumped for the power gains !!C10S 5.3 BRIANTOOLEY RACING NO SPRINGS REQUIED (NSR) CAM INSTALLED!!!! LS SWAPPED AND CAMMED C10
Posted via Mobile Device |
|
|
|
04-23-2019, 11:36 PM
|
#2 |
|
Registered User
Join Date: Jun 2009
Location: Pasco, wa
Posts: 111
|
Re: Cammed my 5.3 ls
Which one did you go with?
I put one of their nsr truck stage 1 cams in my wifes 08 suburban when i deleted the AFM/DOD in it. I did put a new set of ls6 springs in also, 145k on stock springs it was cheap insurance. Runs out pretty well for a big ol rig. You can tell by the exhaust note it isnt stock but its still pretty tame with no driveability issues. PS you will see copper on the cam bearings, unless one comes out with the old cam dont worry about them.
__________________
1972 C10 cheyenne super -350/th350 Wifes truck 1971 Nova- 6.0l with some goodies and a t56, 98-02 camaro brakes all around, tubular control arms, etc 2000 zr2 blazer- rock crawler offroad toy, one ton axles and lockers front and rear. 2006 2500hd- 500hp duramax/built allison trans,traction bars, and some other goodies. |
|
|
|
|
04-23-2019, 11:40 PM
|
#3 |
|
Post Whore
  
Join Date: May 2015
Location: Alabama
Posts: 14,587
|
Re: Cammed my 5.3 ls
Good to hear you like it rennat...I also went with the btr stage 1 truck....haven't cranked it yet...real anxious to hear it growl....
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
|
|
|
|
04-24-2019, 10:57 PM
|
#4 |
|
Senior Member
Join Date: Aug 2012
Location: Somewhere In So. IL.
Posts: 398
|
Re: Cammed my 5.3 ls
After spending hours on YouTube listening to different cams, I decided on the BTR Stage 4 truck cam. Should have a nice lope to it. Now to get it in the engine and into the truck ...
__________________
Doug Old Build Thread - 383/T56 http://www.67-72chevytrucks.com/vboa...d.php?t=540838 Updated Build Thread - Modern Relic - 66 C10 536 Dark Aqua 5.3/4L60E - BTR Stage IV Truck Cam - Vintage Air - Dakota Digital http://67-72chevytrucks.com/vboard/s...d.php?t=778784 |
|
|
|
|
04-25-2019, 11:24 AM
|
#5 | |
|
Registered User
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,705
|
Re: Cammed my 5.3 ls
Quote:
https://www.briantooleyracing.com/tr...ge-iv-cam.html
__________________
1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD* GO  GO!!!
|
|
|
|
|
|
04-26-2019, 10:35 AM
|
#6 | |
|
Registered User
Join Date: Sep 2018
Location: South of the Indy 500
Posts: 116
|
Re: Cammed my 5.3 ls
Quote:
|
|
|
|
|
|
04-26-2019, 10:57 AM
|
#7 |
|
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,587
|
Re: Cammed my 5.3 ls
Pontitruck...look on utube at btr nsr cams...
When I talked to btr I told them I had a stock 5.3 with headers and only wanted a little rumble..they recommended the stage 1 or 2 truck series cam...I went with stage 1 but havnt cranked it yet.. They also recommended the spring upgrade which I did...if running a auto you may need a stall.. When I got it the box said comp cams on it....go figure....
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
