1969 Chevy truck crew cab - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boundstaffpress · 01-20-2006, 12:25 PM

I think it would look a little more balanced with a short bed.

hgs_notes · 01-20-2006, 05:22 PM

I think it would look more balanced with some 66" monster truck tires under it. Or jack it up and put one of those old style extra long campers in the bed. You want big, then go BIG!!!

Cool project, HG

scotto0609 · 01-20-2006, 05:24 PM

Looks like too much work. You should sell it............... to me!

JAKES 68GMC · 01-20-2006, 08:12 PM

Nice truck.

**special-K** · 01-21-2006, 11:53 AM

I was thinking it was a`Burb cut down based on several ques like welded areas,the doors,but mostly the door moulding from a`Burb.The truck wasn`t built to be fancy,so why would they add rare Suburban moulding(and just to the front door?).It also seemed obvious the frame-down was a later K-model 3+3.

extd56 · 01-22-2006, 04:03 PM

Here are some new pictures fo the progress on the truck. I have taken off the front fenders and hood to start working on them. The interior has been taken out to fix rust issues and common stuff like cab corners and rockers. I have taken out the heater to get it ready for old air install. I have not found any problems that were not expected.

extd56 · 01-22-2006, 04:06 PM

A few more pictures of where you can see the Po modified the cab to fit over the later model frame. I also picked up a divorced transfer case yesterday that I may use with the 4L80E transmission, keeping my optios open.

bad_turbo · 01-24-2008, 02:57 PM

Dug this out of the archives. Just wondering what became of this truck?

extd56 · 01-25-2008, 01:16 AM

Here is the build up on it.

http://67-72chevytrucks.com/vboard/s...highlight=crew

01-20-2006, 12:25 PM	#51
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: 1969 Chevy truck crew cab I think it would look a little more balanced with a short bed. __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis

01-20-2006, 05:22 PM	#52
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: 1969 Chevy truck crew cab I think it would look more balanced with some 66" monster truck tires under it. Or jack it up and put one of those old style extra long campers in the bed. You want big, then go BIG!!! Cool project, HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-20-2006, 05:24 PM	#53
scotto0609 Junior Member Join Date: Nov 2005 Location: new york Posts: 226	Re: 1969 Chevy truck crew cab Looks like too much work. You should sell it............... to me!

01-20-2006, 08:12 PM	#54
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: 1969 Chevy truck crew cab Nice truck.

01-21-2006, 11:53 AM	#55
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1969 Chevy truck crew cab I was thinking it was a`Burb cut down based on several ques like welded areas,the doors,but mostly the door moulding from a`Burb.The truck wasn`t built to be fancy,so why would they add rare Suburban moulding(and just to the front door?).It also seemed obvious the frame-down was a later K-model 3+3. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-22-2006, 04:03 PM	#56
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1969 Chevy truck crew cab Here are some new pictures fo the progress on the truck. I have taken off the front fenders and hood to start working on them. The interior has been taken out to fix rust issues and common stuff like cab corners and rockers. I have taken out the heater to get it ready for old air install. I have not found any problems that were not expected. Attached Images

01-22-2006, 04:06 PM	#57
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1969 Chevy truck crew cab A few more pictures of where you can see the Po modified the cab to fit over the later model frame. I also picked up a divorced transfer case yesterday that I may use with the 4L80E transmission, keeping my optios open. Attached Images

01-24-2008, 02:57 PM	#58
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: 1969 Chevy truck crew cab Dug this out of the archives. Just wondering what became of this truck? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

01-25-2008, 01:16 AM	#59
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 1969 Chevy truck crew cab Here is the build up on it. http://67-72chevytrucks.com/vboard/s...highlight=crew



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.