KY 67 SWB Part Out!

[slick copper]

SOLD! SOLD! SOLD! The truck is gone! Everything is gone except my 350 which I think I'm gonna keep just in case I need it for my or another project.


PRICE CUTS!!!!
Hey guys! Parting out this poor ole rusted 67 Chevy that I've had sitting around for a few years. Tried selling it all together, but seems more interest in parts of it. So here ya go. Prices may be negotiable. If you think it's too high, get with me.
Large/Heavy items would rather have local pickup. Such as cab, bed, frame, cowl panel, bumper, engine etc.
If I've not listed something or priced just ask. You may see something I've missed.
Painted bumper (patina, torched under license plate area. can be welded up. straight other than that) $15
Original Gauge cluster with gauges $75
SWB frame (cab, bed, etc. not included) $475
Cowls (one from 67SOLD, one pictured in barn from my old 70) light surface rust on each and have antenna hole $30 a peice One left!

[passthebuck]

I'm in for the _exterior_ door handles. Price? Condition?

[slick copper]

Here's more.
350 small block. Rebuilt 2 bolt main. 1000 miles or less on it. Truck it was in (my 70 ((first truck)) was wrecked in 2002. Been sitting here in barn ever since. Numbers match up to a '70 corvette from what I remember. Turns over so far by hand then stops, but ran when pulled and had 500 mile break in oil change. NEVER bored. Wasn't that bad when rebuilt so was just honed before installing new pistons. Built stock. 4 barrel Q-jet intake and carb, Delco HEI distributor. That's all I can think of on it for now. $500

New patch panels, just been sitting in barn (covered in barn dust in pics, will clean before pickup or shipped)
Cab corners LH and RH $18 a piece shipped!
RH full rocker $12 SOLD
LH or RH rocker patch panel $8 shipped

[slick copper]

Originally Posted by passthebuck

I'm in for the _exterior_ door handles. Price? Condition?

Pretty ruff. Could be redone, but personally I'd buy new. Don't know if I have a pic. $5 for both plus shipping.

[slick copper]

More pics of frame cab etc. Plan to include axle and suspension with frame. Front end is already gone just incase you're wondering.

Black seat (not 67, came from my 70) Good padding, needs reupholstered. $40

[passthebuck]

A photo would be most appreciated if possible. Thanks!

[daddymoo2]

Slickcopper: How much for choke cable/knob and wiper switch/knob and lighter assy. will meet at Wendy's. Thanks Don

[msgross]

Is that manual choke or manual throttle?

If it's Manual throttle then i'll take the setup for it... let me know please.

[DaHos]

Rear window trim and rear roof body line trim, roof drip rail trim. Inner door panels (how they look?) , rear view mirror with bracket, and the 2 cab corners to 48867.

thx, D

off to work to pay for this crap....later...

[DaHos]

Also, any seat belts?

[MadnessBigBlock]

I will take the interior door handles the interior window cranks (if you have them) and the vent window khandles! Get me price shipped to zip 58268! I'm second in line for choke cable/knob and wiper switch/knob and lighter assy, also the rear view mirror with bracket.
Posted via Mobile Device

[tanman722001]

interested in the full rocker and rocker patch.Shipped to zip 27028

[michael bustamante]

Interested in the cluster assy. Any cab corners left? how much for the glove box door?

[cleanfreak]

Interested in the glove box door if it gets to me , do you have a closer picture of the emblem? Thanks - Bob

[71swb4x4]

Also interested in seat belts depending on color, condition and price.

[mcbassin]

Next in line on the full rocker and cab corner it the guys ahead of me pass. thanks

[chevytruckluver]

Any chance you have the door mirror arms? L and R

[slick copper]

On my phone. I'll get back with everyone better tonight. There were two original seat belts, but I'm planning to use for my truck. No exterior mirror arms. Truck has no trim on it. Glove box door in good shape, but emblem was also salvaged for my project.
Posted via Mobile Device

[michael bustamante]

hey on that glovebox door emblem.... did you notice any tabs that plug in the glovebox door? I have the emblem for my door but the nubs that go in the door are way too skinny like theres supposed to be some kind of tab or something that it slides into. Ill have to pass on the dash cluster. I cant swing a bill right now

[cleanfreak]

pass on the door , was looking for it just to get the emblem - Thanks

[slick copper]

Originally Posted by michael bustamante

hey on that glovebox door emblem.... did you notice any tabs that plug in the glovebox door? I have the emblem for my door but the nubs that go in the door are way too skinny like theres supposed to be some kind of tab or something that it slides into. Ill have to pass on the dash cluster. I cant swing a bill right now

[COLOR="Dark orange"]yeah I know what you're talking about. One broke, one I lost, and one I used. But yeah there's some little clips that go into the holes and the emblem pushes into. They keep it in place. [/COLOR]
Posted via Mobile Device

[slick copper]

Originally Posted by daddymoo2

Slickcopper: How much for choke cable/knob and wiper switch/knob and lighter assy. will meet at Wendy's. Thanks Don

Choke cable is good except end/tip (part that bends over and goes into carb linkage) is broke/cut off. I guess could be bent and still used. Don't have lighter assy. Do have wiper switch and knob. How about $25 for the switch, knobs, and choke cable setups? Pics....

Originally Posted by msgross

Is that manual choke or manual throttle?

If it's Manual throttle then i'll take the setup for it... let me know please.

Manual Choke. Sorry.

Originally Posted by DaHos

Rear window trim and rear roof body line trim, roof drip rail trim. Inner door panels (how they look?) , rear view mirror with bracket, and the 2 cab corners to 48867.

thx, D

off to work to pay for this crap....later...

Do have trim on back of cab. My mistake. I think it's in fair condition, haven't looked at yet. Might get a chance to look this weekend (truck's at my mom's 15 min out of the way). Inner door panels have surface rust and seems like a couple extra screw holes in the bottom. Cab corners $24, rearview mirror & bracket $10, trim $10, and let me know on the door panels shipping $15-20 for total $58 + door panels if you want add $15 for both.

Originally Posted by MadnessBigBlock

I will take the interior door handles the interior window cranks (if you have them) and the vent window khandles! Get me price shipped to zip 58268! I'm second in line for choke cable/knob and wiper switch/knob and lighter assy, also the rear view mirror with bracket.
Posted via Mobile Device

Only have one window crank and one door handle, but are original. $10 for both Vent window knobs are corroded, not very good. $3 if ya want 'em. USPS not coming up with you zip code??

[slick copper]

Originally Posted by tanman722001

interested in the full rocker and rocker patch.Shipped to zip 27028

$26 to your door. Sound good?

[slick copper]

More to come. Some parts I have here at my house, others are still on the truck which is at my mom's farm 15 min out of my way. Just giving everyone a heads up incase you're wanting pics, or wanting a certain part that may still be on the truck. Hopefully I can get out there this weekend and take the rest of it apart.

[passthebuck]

Raymond,

Don't bother with a pic of the exterior door handles - I'll take them either way. Check your PM's.