|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Thread Tools | Display Modes |
|
|
03-02-2011, 02:43 AM
|
#1 |
|
Always a work in progress
Join Date: Jun 2007
Location: Harker Heights, TX
Posts: 1,599
|
Re: Camaro Caliper Brackets
Thank you for your help and sorry for hijacking your thread!!! I will find a way to get the camaro calipers and impala rotors on the 9".
__________________
USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168 |
|
|
|
03-02-2011, 11:27 PM
|
#2 | |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Camaro Caliper Brackets
No worries, you're not hijacking.
Sorry I didn't get back sooner on the brake offset.....I just plain forgot last night. Anyway, the brake offset on a truck 12 bolt is 2-1/2". I measured a 5 lug 12 bolt, and it was 2-1/2". I measured a '67 6 lug 12 bolt and it was 2-5/8" on one side, but I couldn't measure the other side yet. Then I measured a 9" that I narrowed, and set up for the truck brakes, and it is at 2-1/2" also. I think that possibly the 2.42" that Moser shows on their site might be the location on the axle itself. With the pressed on bearings, the bearing sits about 1/16" (.062") outside of the housing end. This would make the brake offset right close to 2-1/2" Here are the housing ends that I have used that I was referring to. http://www.moserengineering.com/othe...lip-axles.html Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 03-02-2011 at 11:31 PM. |
|
|
|
|
|
03-06-2011, 04:00 PM
|
#3 |
|
landarts
Join Date: May 2005
Location: Star, Idaho
Posts: 1,350
|
Re: Camaro Caliper Brackets
Will these work on 1/2 ton 72 4x4 for he rear brakes?
Jim |
|
|
|
|
03-07-2011, 12:35 AM
|
#4 | |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Camaro Caliper Brackets
The 5x5" Impala SS rotors won't work on a 6x5.5" application. The ones you need are here....
http://www.67-72chevytrucks.com/vboa...d.php?t=445599 Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
