Paying it forward!!!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedneckRodder · 08-20-2013, 09:45 PM

nvrdone has laid claim to my original springs (front and rear) all other parts I listed are still available.
Posted via Mobile Device

nvrdone · 08-21-2013, 10:21 AM

Redneckrodder gets my rear bumper brackets. anyone want any of the other parts?

Root2812 · 08-21-2013, 08:52 PM

Quote:

Originally Posted by nvrdone

I will have a complete seat with frame and good cushions later.

Why can't you be closer!

But I also have some parts to give. I have a pair of front fenders for a half ton AD someone can have. They have some damage down low in the front but would be fixable to someone with more time than money. Pick up only, they aren't worth shipping. Located in Sandstone Minnesota.

nvrdone · 08-22-2013, 11:19 AM

Root - anything specific you need ?
Posted via Mobile Device

Root2812 · 08-22-2013, 07:56 PM

Quote:

Originally Posted by nvrdone

Root - anything specific you need ?
Posted via Mobile Device

No but thank you. My truck didn't have a seat (not even a piece of it was left) so I have a mini van seat that works well. I'll find a complete stock seat around here eventually. I'd take you up on yours but that's a big item to ship.

Also here are some pictures of the fenders that I had on my computer.

Russell Ashley · 08-24-2013, 05:41 PM

Anyone still running a generator and need a voltage regulator? I got this one a couple of years ago when I cleaned out my Father in Law's garage. It's a Delco Remy that has never been installed. There is a sticker on the bottom that says "rebuilt by ACC Rebuilders". The chart on the box says it's correct for 55-62 Chevys and 56-61 GMCs. If you need a regulator for your 60-62 Corvair this fits that too, as well as several other GM vehicles from the fifties. It's a 168 and the chart lists what it fits. I have no way to test it but if you want it for the cost of shipping you can have it.

Tomb23 · 10-02-2013, 08:20 PM

Anyone need a Oval Logo 6 cly valve cover

Tomb23 · 10-03-2013, 07:13 PM

? going going ?

**arturo7** · 10-03-2013, 09:50 PM

Anyone need a 3-on-the-tree shifter?

missinfishin10 · 10-04-2013, 07:37 PM

Quote:

Originally Posted by Russell Ashley

Anyone still running a generator and need a voltage regulator? I got this one a couple of years ago when I cleaned out my Father in Law's garage. It's a Delco Remy that has never been installed. There is a sticker on the bottom that says "rebuilt by ACC Rebuilders". The chart on the box says it's correct for 55-62 Chevys and 56-61 GMCs. If you need a regulator for your 60-62 Corvair this fits that too, as well as several other GM vehicles from the fifties. It's a 168 and the chart lists what it fits. I have no way to test it but if you want it for the cost of shipping you can have it.

Russ I could use this regulator if still available. Let me know shipping and I'll forward it to you! Thanks so much for being an awesome member of the best forum on the WWW!

Thanks!Jeff

Russell Ashley · 10-05-2013, 08:18 AM

Quote:

Originally Posted by missinfishin10

Russ I could use this regulator if still available. Let me know shipping and I'll forward it to you! Thanks so much for being an awesome member of the best forum on the WWW!

Thanks!Jeff

Jeff, it's yours. I can mail it to you or meet you somewhere if you are going to be near Lawrenceville anytime soon. Post or PM me your address if you want me to mail it.
I'm glad someone can use it and get it off of my desk, LOL. It's been sitting here for over a year now.

missinfishin10 · 10-05-2013, 07:21 PM

Russ my man, You've got money!

I just got my wiring harness in from Speedway Motors. I have a December goal to have this truck done, done right and done almost original while on a tight budget the whole way! Started looking for my next AD truck. If you run across one of those "to good to be true" deals and don't want it for yourself, let me know. I also just acquired a good lt1 drivetrain, suspension and 4 wheel disc set up I'm itching to put under one.

Keep an eye peeled for me!

Thank you again! Jeff

missinfishin10 · 10-05-2013, 07:30 PM

Edited by Forum Staff
This thread not for purchase items. Since you're a subscribing member, you're more than welcome to post in wtb area.
Sorry, but this thread has to stay with these rules.

Kurt L · 10-05-2013, 08:04 PM

i have a set of painted vent windows that i don't need any more. plus a power steering pump also. prabably some other parts that i don't need if any one 's interested.

Russell Ashley · 10-10-2013, 03:56 PM

Quote:

Originally Posted by missinfishin10

Russ I could use this regulator if still available. Let me know shipping and I'll forward it to you! Thanks so much for being an awesome member of the best forum on the WWW!

Thanks!Jeff

Jeff, I'm still needing your address. Sent you a PM but haven't heard back.

Russ

mechanixman · 10-10-2013, 08:00 PM

I've got some turn signals, an oil filter, and a beat up glove box door if anyone is interested.

57picupnewbie · 10-12-2013, 07:18 PM

Quote:

Originally Posted by thump16

I have two stepside fenders left and right and spare tire holder.
Posted via Mobile Device

What year are your fenders?

57picupnewbie · 10-12-2013, 07:28 PM

I have a original bench seat for a '55-'57 truck. It is in fairly good shape. PM me for info. Free to anyone who needs one. Pick up in person or pay shipping.

Panelman55 · 10-13-2013, 08:31 PM

I have atruck seat from a 58' Not reallt sure what all it will fit. Let me know.

Panelman55

missinfishin10 · 10-17-2013, 07:17 PM

Russ, I got the regulator yesterday! Thank you!

Gold Rush Festival here in Dahlonega this weekend. Ever Been? Its a big deal! 150000+ people in town.

Russell Ashley · 10-18-2013, 08:07 AM

Quote:

Originally Posted by missinfishin10

Russ, I got the regulator yesterday! Thank you!

Gold Rush Festival here in Dahlonega this weekend. Ever Been? Its a big deal! 150000+ people in town.

You are welcome, glad I could find a home for it.

I've been to Dahlonega but never during the Gold Rush Festival. I want to take a drive up that way soon but will wait until the 150K people leave first, LOL.

crossfire84 · 10-19-2013, 02:49 PM

small block mr-gasket and felpro header gaskets, all brand new. Felpro have steel shim inside.

nvrdone · 10-20-2013, 05:09 PM

ok, still have some parts up for grabs from my '49 3100.
l & r window regulators with handles. 2 - 12v voltage regulators, front axle, in cab gas tank with filler neck & sender, maybe other things if I dig deep enough.

Root2812 · 10-20-2013, 05:21 PM

Quote:

Originally Posted by nvrdone

ok, still have some parts up for grabs from my '49 3100.
l & r window regulators with handles. 2 - 12v voltage regulators, front axle, in cab gas tank with filler neck & sender, maybe other things if I dig deep enough.

If it works I could use a the sending unit.

nvrdone · 10-20-2013, 06:35 PM

Root: the sender works good, so if you're interested, pm with an address and I will try and ship it next weekend.

08-20-2013, 09:45 PM	#51
RedneckRodder Registered User Join Date: Mar 2013 Location: Silvana, WA Posts: 181	Re: Paying it forward!!!! nvrdone has laid claim to my original springs (front and rear) all other parts I listed are still available. Posted via Mobile Device __________________ My build http://67-72chevytrucks.com/vboard/s...d.php?t=576733

08-21-2013, 10:21 AM	#52
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: Paying it forward!!!! Redneckrodder gets my rear bumper brackets. anyone want any of the other parts?

08-22-2013, 11:19 AM	#54
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: Paying it forward!!!! Root - anything specific you need ? Posted via Mobile Device

08-24-2013, 05:41 PM	#56
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,640	Re: Paying it forward!!!! Anyone still running a generator and need a voltage regulator? I got this one a couple of years ago when I cleaned out my Father in Law's garage. It's a Delco Remy that has never been installed. There is a sticker on the bottom that says "rebuilt by ACC Rebuilders". The chart on the box says it's correct for 55-62 Chevys and 56-61 GMCs. If you need a regulator for your 60-62 Corvair this fits that too, as well as several other GM vehicles from the fifties. It's a 168 and the chart lists what it fits. I have no way to test it but if you want it for the cost of shipping you can have it. Attached Images

10-02-2013, 08:20 PM	#57
Tomb23 Registered User Join Date: May 2004 Location: Eastern Oregon Posts: 201	Re: Paying it forward!!!! Anyone need a Oval Logo 6 cly valve cover

10-03-2013, 07:13 PM	#58
Tomb23 Registered User Join Date: May 2004 Location: Eastern Oregon Posts: 201	Re: Paying it forward!!!! ? going going ? Attached Images

10-03-2013, 09:50 PM	#59
arturo7 Senior Member Join Date: Jul 2012 Location: huntington beach Posts: 845	Re: Paying it forward!!!! Anyone need a 3-on-the-tree shifter? __________________ ever forward build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=542073

10-05-2013, 07:21 PM	#62
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Paying it forward!!!! Russ my man, You've got money! I just got my wiring harness in from Speedway Motors. I have a December goal to have this truck done, done right and done almost original while on a tight budget the whole way! Started looking for my next AD truck. If you run across one of those "to good to be true" deals and don't want it for yourself, let me know. I also just acquired a good lt1 drivetrain, suspension and 4 wheel disc set up I'm itching to put under one. Keep an eye peeled for me! Thank you again! Jeff __________________ 71 LWB Fleetside 1950 3100 Original Project! Last edited by missinfishin10; 10-05-2013 at 07:42 PM.

10-05-2013, 07:30 PM	#63
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Paying it forward!!!! Edited by Forum Staff This thread not for purchase items. Since you're a subscribing member, you're more than welcome to post in wtb area. Sorry, but this thread has to stay with these rules. __________________ 71 LWB Fleetside 1950 3100 Original Project! Last edited by 63 & 64 Bowties; 10-05-2013 at 08:38 PM.

10-05-2013, 08:04 PM	#64
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: Paying it forward!!!! i have a set of painted vent windows that i don't need any more. plus a power steering pump also. prabably some other parts that i don't need if any one 's interested.

10-10-2013, 08:00 PM	#66
mechanixman Registered User Join Date: Sep 2012 Location: Mt. Prospect, ILL Posts: 820	Re: Paying it forward!!!! I've got some turn signals, an oil filter, and a beat up glove box door if anyone is interested. __________________ -Nick Projects: 1952 Chevy 1 ton = The Build page

10-12-2013, 07:28 PM	#68
57picupnewbie '57 Rosa Join Date: Sep 2009 Location: Fitzgerald,GA Posts: 162	Re: Paying it forward!!!! I have a original bench seat for a '55-'57 truck. It is in fairly good shape. PM me for info. Free to anyone who needs one. Pick up in person or pay shipping. __________________ My '57 Truck Build "Rosa" (Current Project) http://67-72chevytrucks.com/vboard/s...21#post4118721 2003 Dodge Dakota 4X4 (Daily Driver) Only two defining forces have ever died for us: CHRIST died for our salvation and VETERANS died for our freedoms. Glorify CHRIST and thank VETERANs Dru~ USN Retired

10-13-2013, 08:31 PM	#69
Panelman55 Registered User Join Date: Dec 2009 Location: Winston, Ga. Posts: 240	Re: Paying it forward!!!! I have atruck seat from a 58' Not reallt sure what all it will fit. Let me know. Panelman55 __________________ In God We trust!!!

10-17-2013, 07:17 PM	#70
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Paying it forward!!!! Russ, I got the regulator yesterday! Thank you! Gold Rush Festival here in Dahlonega this weekend. Ever Been? Its a big deal! 150000+ people in town. __________________ 71 LWB Fleetside 1950 3100 Original Project!

10-19-2013, 02:49 PM	#72
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	Re: Paying it forward!!!! small block mr-gasket and felpro header gaskets, all brand new. Felpro have steel shim inside. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!



Register or Log In To remove these advertisements.

10-20-2013, 05:09 PM	#73
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: Paying it forward!!!! ok, still have some parts up for grabs from my '49 3100. l & r window regulators with handles. 2 - 12v voltage regulators, front axle, in cab gas tank with filler neck & sender, maybe other things if I dig deep enough.

10-20-2013, 06:35 PM	#75
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,425	Re: Paying it forward!!!! Root: the sender works good, so if you're interested, pm with an address and I will try and ship it next weekend.

Register or Log In To remove these advertisements.